| Age | Commit message (Collapse) | Author |
|---|
|
Reduce dependence on the global the_hash_algo and the_repository
variables of wt-status code path.
* sp/wt-status-wo-the-repository:
wt-status: use hash_algo from local repository instead of global the_hash_algo
wt-status: replace uses of the_repository with local repository instances
wt-status: pass struct repository through function parameters
|
|
The core.attributesfile is intended to be set per repository, but
were kept track of by a single global variable in-core, which has
been corrected by moving it to per-repository data structure.
* ob/core-attributesfile-in-repository:
environment: move "branch.autoSetupMerge" into `struct repo_config_values`
environment: stop using core.sparseCheckout globally
environment: stop storing `core.attributesFile` globally
|
|
API clean-up for the worktree subsystem.
* pw/no-more-NULL-means-current-worktree:
path: remove repository argument from worktree_git_path()
wt-status: avoid passing NULL worktree
|
|
The config value `core.sparseCheckout` is parsed in
`git_default_core_config()` and stored globally in
`core_apply_sparse_checkout`. This could cause it to be overwritten
by another repository when different Git repositories run in the same
process.
Move the parsed value into `struct repo_config_values` in the_repository
to retain current behaviours and move towards libifying Git.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
worktree_git_path() takes a struct repository and a struct worktree
which also contains a struct repository. The repository argument
was added by a973f60dc7c (path: stop relying on `the_repository` in
`worktree_git_path()`, 2024-08-13) and exists because the worktree
argument is optional. Having two ways of passing a repository is
a potential foot-gun as if the the worktree argument is present the
repository argument must match the worktree's repository member. Since
the last commit there are no callers that pass a NULL worktree so lets
remove the repository argument. This removes the potential confusion
and lets us delete a number of uses of "the_repository".
worktree_git_path() has the following callers:
- builtin/worktree.c:validate_no_submodules() which is called from
check_clean_worktree() and move_worktree(), both of which supply
a non-NULL worktree.
- builtin/fsck.c:cmd_fsck() which loops over all worktrees.
- revision.c:add_index_objects_to_pending() which loops over all
worktrees.
- worktree.c:worktree_lock_reason() which dereferences wt before
calling worktree_git_path().
- wt-status.c:wt_status_check_bisect() and wt_status_check_rebase()
which are always called with a non-NULL worktree after the last
commit.
- wt-status.c:git_branch() which is only called by
wt_status_check_bisect() and wt_status_check_rebase().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for removing the repository argument from
worktree_git_path() add a function to construct a "struct worktree"
from a "struct repository" using its "gitdir" and "worktree"
members. This function is then used to avoid passing a NULL worktree to
wt_status_check_bisect() and wt_status_check_rebase(). In general the
"struct worktree" returned may not correspond to the "current" worktree
defined by is_current_worktree() as that function uses "the_repository"
rather than "wt->repo" when deciding which worktree is "current". In
practice the "struct repository" we pass corresponds to "the_repository"
as we only ever operate on a single repository at the moment.
wt_status_check_bisect() and wt_status_check_rebase() have the following
callers:
- branch.c:prepare_checked_out_branches() which loops over all
worktrees.
- worktree.c:is_worktree_being_rebased() which is called from
builtin/branch.c:reject_rebase_or_bisect_branch() that loops over all
worktrees and worktree.c:is_shared_symref() which dereferences wt
earlier in the function.
- wt-status:wt_status_get_state() which is updated to avoid passing a
NULL worktree by this patch.
This updates the only callers that pass a NULL worktree to
worktree_git_path(). A new test is added to check that "git status"
detects a rebase in a linked worktree.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
wt-status.c still uses the global the_hash_algo even though a repository
instance is already available via struct wt_status.
Replace uses of the_hash_algo with the hash algorithm stored in the
associated repository (s->repo->hash_algo or r->hash_algo).
This removes another dependency on global state and keeps wt-status
consistent with local repository usage.
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
wt-status.c uses the global the_repository in several places even when a
repository instance is already available via struct wt_status *s or struct
repository *r.
Replace these uses of the_repository with the repository available in the
local context (i.e. s->repo or r).
The replacements of all the_repository with s->repo are mostly to cases
where a repository instance is already available via struct wt_status *s
and struct repository *r, all functions operating on struct wt_status *s
are only used after s is initialized by wt_status_prepare(), which sets
s->repo from the repository provided by the caller. As a result, s->repo is
guaranteed to be available and consistent whenever these functions are
invoked.
This reduces reliance on global state and keeps wt-status consistent,
though many functions operating on struct wt_status *s are called via
commit.c and it still relies on the_repository, but within wt-status.c the
local repository pointer refers to the same underlying repository object.
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some functions in wt-status.c (count_stash_entries(),
read_line_from_git_path(), abbrev_oid_in_line(), and
read_rebase_todolist()) rely on the_repository as they do not have access
to a local repository instance.
Add a struct repository *r parameter to these functions and pass the local
repository instance through the callers, which already have access to it
either directly by struct repository *r or indirectly by struct wt_state
*s (s->repo).
Replace uses of the_repository in these functions with the passed parameter.
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "wt-status" subsystem is responsible for printing status information
around the current state of the working tree. This most importantly
includes information around whether the working tree or the index have
any changes.
We're about to introduce a new command where the changes in neither of
them are actually relevant to us. Instead, what we want is to format the
changes between two different trees. While it is a little bit of a
stretch to add this as functionality to _working tree_ status, it
doesn't make any sense to open-code this functionality, either.
Implement a new function `wt_status_collect_changes_trees()` that diffs
two trees and formats the status accordingly. This function is not yet
used, but will be in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--short" option of "git status" that meant output for humans
and "-z" option to show NUL delimited output format did not mix
well, and colored some but not all things. The command has been
updated to color all elements consistently in such a case.
* jk/status-z-short-fix:
status: make coloring of "-z --short" consistent
|
|
When running "git status -z --short", the marker on modified index
entries (e.g., "M") is colorized, but the "??" marker for untracked
entries is not. Let's fix the "??" entries to show color here.
At first glance you might think that neither should be colorized, as
usually one would use "-z" to get machine-readable output. But this is a
tricky and unusual case. We have two output formats, "--short" and
"--porcelain" which are substantially similar, but differ in that
"--short" is for humans who want something short and "--porcelain" is
for machines. And "-z" by itself, without any other output option, does
default to "--porcelain", so "git status -z" will not colorize anything.
But if you explicitly ask for "-z" and "--short" together, then that is
asking for the human-readable output, but separated by NULs. This is
unlikely to be useful directly, but could for example be used if the
output will be shown to a human outside of the terminal. At any rate,
the current behavior is clearly wrong (since we colorize some things but
not others), and I think colorizing everything is the least-surprising
thing we can do here.
Reported-by: Langbart <Langbart@protonmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some places in the code confused a variable that is *not* a boolean
to enable color but is an enum that records what the user requested
to do about color. A couple of bugs of this sort have been fixed,
while the code has been cleaned up to prevent similar bugs in the
future.
* jk/color-variable-fixes:
config: store want_color() result in a separate bool
add-interactive: retain colorbool values longer
color: return bool from want_color()
color: use git_colorbool enum type to store colorbools
pretty: use format_commit_context.auto_color as colorbool
diff: stop passing ecbdata->use_color as boolean
diff: pass o->use_color directly to fill_metainfo()
diff: don't use diff_options.use_color as a strict bool
diff: simplify color_moved check when flushing
grep: don't treat grep_opt.color as a strict bool
color: return enum from git_config_colorbool()
color: use GIT_COLOR_* instead of numeric constants
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arrays of strbuf is often a wrong data structure to use, and
strbuf_split*() family of functions that create them often have
better alternatives.
Update several code paths and replace strbuf_split*().
* jc/strbuf-split:
trace2: do not use strbuf_split*()
trace2: trim_trailing_newline followed by trim is a no-op
sub-process: do not use strbuf_split*()
environment: do not use strbuf_split*()
config: do not use strbuf_split()
notes: do not use strbuf_split*()
merge-tree: do not use strbuf_split*()
clean: do not use strbuf_split*() [part 2]
clean: do not pass the whole structure when it is not necessary
clean: do not use strbuf_split*() [part 1]
clean: do not pass strbuf by value
wt-status: avoid strbuf_split*()
|
|
With `refs_for_each_reflog_ent()` callers can iterate through all the
reflog entries for a given reference. The callback that is being invoked
for each such entry does not receive the name of the reference that we
are currently iterating through. This isn't really a limiting factor, as
callers can simply pass the name via the callback data.
But this layout sometimes does make for a bit of an awkward calling
pattern. One example: when iterating through all reflogs, and for each
reflog we iterate through all refnames, we have to do some extra book
keeping to track which reference name we are currently yielding reflog
entries for.
Change the signature of the callback function so that the reference name
of the reflog gets passed through to it. Adapt callers accordingly and
start using the new parameter in trivial cases. The next commit will
refactor the reference migration logic to make use of this parameter so
that we can simplify its logic a bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
strbuf is a very good data structure to work with string data
without having to worry about running past the end of the string,
but strbuf_split() is a wrong API and an array of strbuf that the
function produces is a wrong thing to use in general. You do not
edit these N strings split out of a single strbuf simultaneously.
Often it is much better off to split a string into string_list and
work with the resulting strings.
wt-status.c:abbrev_oid_in_line() takes one line of rebase todo list
(like "pick e813a0200a7121b97fec535f0d0b460b0a33356c title"), and
for instructions that has an object name as the second token on the
line, replace the object name with its unique abbreviation. After
splitting these tokens out of a single line, no simultaneous edit on
any of these pieces of string that takes advantage of strbuf API
takes place. The final string is composed with strbuf API, but
these split pieces are merely used as pieces of strings and there is
no need for them to be stored in individual strbuf.
Instead, split the line into a string_list, and compose the final
string using these pieces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove `git_path()` in favor of the `repo_git_path()` family of
functions, which makes the implicit dependency on `the_repository` go
away.
Note that `git_path()` returned a string allocated via `get_pathname()`,
which uses a rotating set of statically allocated buffers. Consequently,
callers didn't have to free the returned string. The same isn't true for
`repo_common_path()`, so we also have to add logic to free the returned
strings.
This refactoring also allows us to remove `repo_common_pathv()` as well
as `get_pathname()` from the public interface.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When hitting a sparse directory in `wt_status_collect_changes_initial()`
we use a `struct strbuf` to assemble the directory's name. We never free
that buffer though, causing a memory leak.
Fix the leak by releasing the buffer. While at it, move the buffer
outside of the loop and reset it to save on some wasteful allocations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ps/environ-wo-the-repository: (21 commits)
environment: stop storing "core.notesRef" globally
environment: stop storing "core.warnAmbiguousRefs" globally
environment: stop storing "core.preferSymlinkRefs" globally
environment: stop storing "core.logAllRefUpdates" globally
refs: stop modifying global `log_all_ref_updates` variable
branch: stop modifying `log_all_ref_updates` variable
repo-settings: track defaults close to `struct repo_settings`
repo-settings: split out declarations into a standalone header
environment: guard state depending on a repository
environment: reorder header to split out `the_repository`-free section
environment: move `set_git_dir()` and related into setup layer
environment: make `get_git_namespace()` self-contained
environment: move object database functions into object layer
config: make dependency on repo in `read_early_config()` explicit
config: document `read_early_config()` and `read_very_early_config()`
environment: make `get_git_work_tree()` accept a repository
environment: make `get_graft_file()` accept a repository
environment: make `get_index_file()` accept a repository
environment: make `get_object_directory()` accept a repository
environment: make `get_git_common_dir()` accept a repository
...
|
|
Code clean-up.
* jc/range-diff-lazy-setup:
remerge-diff: clean up temporary objdir at a central place
remerge-diff: lazily prepare temporary objdir on demand
|
|
The `get_index_file()` function retrieves the path to the index file
of `the_repository`. Make it accept a `struct repository` such that it
can work on arbitrary repositories and make it part of the repository
subsystem. This reduces our reliance on `the_repository` and clarifies
scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When not provided a worktree, then `worktree_git_path()` will fall back
to returning a path relative to the main repository. In this case, we
implicitly rely on `the_repository` to derive the path. Remove this
dependency by passing a `struct repository` as parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After running a diff between two things, or a series of diffs while
walking the history, the diff computation is concluded by a call to
diff_result_code() to extract the exit status of the diff machinery.
The function can work on "struct diffopt", but all the callers
historically and currently pass "struct diffopt" that is embedded in
the "struct rev_info" that is used to hold the remerge_diff bit and
the remerge_objdir variable that points at the temporary object
directory in use.
Redefine diff_result_code() to take the whole "struct rev_info" to
give it an access to these members related to remerge-diff, so that
it can get rid of the temporary object directory for any and all
callers that used the feature. We can lose the equivalent code to
do so from the code paths for individual commands, diff-tree, diff,
and log.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A CPP macro USE_THE_REPOSITORY_VARIABLE is introduced to help
transition the codebase to rely less on the availability of the
singleton the_repository instance.
* ps/use-the-repository:
hex: guard declarations with `USE_THE_REPOSITORY_VARIABLE`
t/helper: remove dependency on `the_repository` in "proc-receive"
t/helper: fix segfault in "oid-array" command without repository
t/helper: use correct object hash in partial-clone helper
compat/fsmonitor: fix socket path in networked SHA256 repos
replace-object: use hash algorithm from passed-in repository
protocol-caps: use hash algorithm from passed-in repository
oidset: pass hash algorithm when parsing file
http-fetch: don't crash when parsing packfile without a repo
hash-ll: merge with "hash.h"
refs: avoid include cycle with "repository.h"
global: introduce `USE_THE_REPOSITORY_VARIABLE` macro
hash: require hash algorithm in `empty_tree_oid_hex()`
hash: require hash algorithm in `is_empty_{blob,tree}_oid()`
hash: make `is_null_oid()` independent of `the_repository`
hash: convert `oidcmp()` and `oideq()` to compare whole hash
global: ensure that object IDs are always padded
hash: require hash algorithm in `oidread()` and `oidclr()`
hash: require hash algorithm in `hasheq()`, `hashcmp()` and `hashclr()`
hash: drop (mostly) unused `is_empty_{blob,tree}_sha1()` functions
|
|
Building with "-Werror -Wwrite-strings" is now supported.
* ps/no-writable-strings: (27 commits)
config.mak.dev: enable `-Wwrite-strings` warning
builtin/merge: always store allocated strings in `pull_twohead`
builtin/rebase: always store allocated string in `options.strategy`
builtin/rebase: do not assign default backend to non-constant field
imap-send: fix leaking memory in `imap_server_conf`
imap-send: drop global `imap_server_conf` variable
mailmap: always store allocated strings in mailmap blob
revision: always store allocated strings in output encoding
remote-curl: avoid assigning string constant to non-const variable
send-pack: always allocate receive status
parse-options: cast long name for OPTION_ALIAS
http: do not assign string constant to non-const field
compat/win32: fix const-correctness with string constants
pretty: add casts for decoration option pointers
object-file: make `buf` parameter of `index_mem()` a constant
object-file: mark cached object buffers as const
ident: add casts for fallback name and GECOS
entry: refactor how we remove items for delayed checkouts
line-log: always allocate the output prefix
line-log: stop assigning string constant to file parent buffer
...
|
|
Varargs functions that are unannotated as printf-like or execl-like
have been annotated as such.
* jc/varargs-attributes:
__attribute__: add a few missing format attributes
__attribute__: mark some functions with LAST_ARG_MUST_BE_NULL
__attribute__: remove redundant attribute declaration for git_die_config()
__attribute__: trace2_region_enter_printf() is like "printf"
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `empty_tree_oid_hex()` function use `the_repository` to derive the
hash function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
While at it, remove the unused `empty_blob_oid_hex()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A public function mem_pool_strfmt() takes printf like parameters,
but is not given an attribute as such. Also a few file-scope static
functions were missing their format attribute.
Add them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to enable `-Wwrite-strings`, which changes the type of
string constants to `const char[]`. Fix various sites where we assign
such constants to non-const variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
core.commentChar used to be limited to a single byte, but has been
updated to allow an arbitrary multi-byte sequence.
* jk/core-comment-string:
config: add core.commentString
config: allow multi-byte core.commentChar
environment: drop comment_line_char compatibility macro
wt-status: drop custom comment-char stringification
sequencer: handle multi-byte comment characters when writing todo list
find multi-byte comment chars in unterminated buffers
find multi-byte comment chars in NUL-terminated strings
prefer comment_line_str to comment_line_char for printing
strbuf: accept a comment string for strbuf_add_commented_lines()
strbuf: accept a comment string for strbuf_commented_addf()
strbuf: accept a comment string for strbuf_stripspace()
environment: store comment_line_char as a string
strbuf: avoid shadowing global comment_line_char name
commit: refactor base-case of adjust_comment_line_char()
strbuf: avoid static variables in strbuf_add_commented_lines()
strbuf: simplify comment-handling in add_lines() helper
config: forbid newline as core.commentChar
|
|
The code to find the effective end of log message can fall into an
endless loop, which has been corrected.
* fs/find-end-of-log-message-fix:
wt-status: don't find scissors line beyond buf len
|
|
In wt_longstatus_print_tracking() we may conditionally show a comment
prefix based on the wt_status->display_comment_prefix flag. We handle
that by creating a local "comment_line_string" that is either the empty
string or the comment character followed by a space.
For a single-byte comment, the maximum length of this string is 2 (plus
a NUL byte). But to handle multi-byte comment characters, it can be
arbitrarily large. One way to handle this is to just call
xstrfmt("%s ", comment_line_str), and then free it when we're done.
But we can simplify things further by just conditionally switching
between our prefix string and an empty string when formatting. We
couldn't just do that with the previous code, because the comment
character was a single byte. There's no way to have a "%c" format switch
between some character and "no character at all". Whereas with "%s" you
can switch between some string and the empty string. So now that we have
a comment string and not a comment char, we can just use it directly
when formatting. Do note that we have to also conditionally add the
trailing space at the same time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several parts of the code need to identify lines that begin with the
comment character, and do so with a simple byte equality check. As part
of the transition to handling multi-byte characters, we need to match
all of the bytes. For cases where we are looking in a NUL-terminated
string, we can just use starts_with(), which checks all of the
characters in comment_line_str.
Note that we can drop the "line.len" check in wt-status.c's
read_rebase_todolist(). The starts_with() function handles the case of
an empty haystack buffer (it will always return false for a non-empty
prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of our transition to multi-byte comment characters, we should
use the string variable rather than the historical character variable.
All of the sites adjusted here are just swapping out "%c" for "%s" in
format strings, or strbuf_addch() for strbuf_addstr(). The type system
and printf-attribute give the compiler enough information to make sure
our formats and variable changes all match (especially important for
cases where the format string is defined far away from its use, like
prepare_to_commit() in commit.c).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_add_commented_lines() rather
than a single character.
All of the callers have to be adjusted; most can just pass
comment_line_str rather than comment_line_char.
And now our "cheat" in strbuf_commented_addf() can go away, as we can
take the full string from it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_commented_addf() rather than a
single character.
All of the callers have to be adjusted, but they can just pass
comment_line_str rather than comment_line_char.
Note that we rely on strbuf_add_commented_lines() under the hood, so
we'll cheat a bit to squeeze our string into a single character (for now
the two are equivalent, and we'll address this TODO in the next patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit -v --cleanup=scissors" used to add the scissors line
twice in the log message buffer, which has been corrected.
* jt/commit-redundant-scissors-fix:
commit: unify logic to avoid multiple scissors lines when merging
commit: avoid redundant scissor line with --cleanup=scissors -v
|
|
If
(a) There is a "---" divider in a commit message,
(b) At some point beyond that divider, there is a cut-line (that is,
"# ------------------------ >8 ------------------------") in the
commit message,
(c) the user does not explicitly set the "no-divider" option,
then "git interpret-trailers" will hang indefinitively.
This is because when (a) is true, find_end_of_log_message() will invoke
ignored_log_message_bytes() with a len that is intended to make it
ignore the part of the commit message beyond the divider. However,
ignored_log_message_bytes() calls wt_status_locate_end(), and that
function ignores the length restriction when it tries to locate the cut
line. If it manages to find one, the returned cutoff value is greater
than len. At this point, ignored_log_message_bytes() goes into an
infinite loop, because it won't advance the string parsing beyond len,
but the exit condition expects to reach cutoff.
Make wt_status_locate_end() honor the length parameter passed in, to
fix this issue.
In general, if wt_status_locate_end() is given a piece of the memory
that lacks NUL at all, strstr() may continue across page boundaries
and run into an unmapped page. For our current callers, this is not
a problem, as all of them except one uses a memory owned by a strbuf
(which guarantees an implicit NUL-termination after its payload),
and the one exception in trailer.c:find_end_of_log_message() uses
strlen() to compute the length before calling this function.
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Reviewed-by: Jonathan Davies <jonathan.davies@nutanix.com>
[jc: tweaked the commit log message and the implementation a bit]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git commit --cleanup=scissors -v` prints two scissors lines:
one at the start of the comment lines, and the other right before the
diff. This is redundant, and pushes the diff further down in the user's
editor than it needs to be.
Make wt_status_add_cut_line() remember if it has added a cut line before,
and avoid adding a redundant one.
Add a test for this.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" is taught to show both the branch being bisected and
being rebased when both are in effect at the same time.
cf. <xmqqil76kyov.fsf@gitster.g>
* rj/status-bisect-while-rebase:
status: fix branch shown when not only bisecting
|
|
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
|
|
"git status" is taught to show both the branch being bisected and
being rebased when both are in effect at the same time.
* rj/status-bisect-while-rebase:
status: fix branch shown when not only bisecting
|
|
We read both the HEAD and ORIG_HEAD references directly from the
filesystem in order to figure out whether we're currently splitting a
commit. If both of the following are true:
- HEAD points to the same object as "rebase-merge/amend".
- ORIG_HEAD points to the same object as "rebase-merge/orig-head".
Then we are currently splitting commits.
The current code only works by chance because we only have a single
reference backend implementation. Refactor it to instead read both refs
via the refdb layer so that we'll also be compatible with alternate
reference backends.
There are some subtleties involved here:
- We pass `RESOLVE_REF_READING` so that a missing ref will cause
`read_ref_full()` to return an error.
- We pass `RESOLVE_REF_NO_RECURSE` so that we do not try to resolve
symrefs. The old code didn't resolve symrefs either, and we only
ever write object IDs into the refs in "rebase-merge/".
- In the same spirit we verify that successfully-read refs are not
symbolic refs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 83c750acde (wt-status.*: better advice for git status added,
2012-06-05), git-status received new informative messages to describe
the ongoing work in a worktree.
These messages were enhanced in 0722c805d6 (status: show the branch name
if possible in in-progress info, 2013-02-03), to show, if possible, the
branch where the operation was initiated.
Since then, we show incorrect information when several operations are in
progress and one of them is bisect:
$ git checkout -b foo
$ GIT_SEQUENCE_EDITOR='echo break >' git rebase -i HEAD~
$ git checkout -b bar
$ git bisect start
$ git status
...
You are currently editing a commit while rebasing branch 'bar' on '...'.
You are currently bisecting, started from branch 'bar'.
...
Note that we erroneously say "while rebasing branch 'bar'" when we
should be referring to "foo".
This must have gone unnoticed for so long because it must be unusual to
start a bisection while another operation is in progress. And even less
usual to involve different branches.
It caught my attention reviewing a leak introduced in 8b87cfd000
(wt-status: move strbuf into read_and_strip_branch(), 2013-03-16).
A simple change to deal with this situation can be to record in struct
wt_status_state, the branch where the bisect starts separately from the
branch related to other operations.
Let's do it and so we'll be able to display correct information and
we'll avoid the leak as well.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
|
