| Age | Commit message (Collapse) | Author |
|---|
|
Code clean-up around the recent "hooks defined in config" topic.
* ar/config-hook-cleanups:
hook: reject unknown hook names in git-hook(1)
hook: show disabled hooks in "git hook list"
hook: show config scope in git hook list
hook: introduce hook_config_cache_entry for per-hook data
t1800: add test to verify hook execution ordering
hook: make consistent use of friendly-name in docs
hook: replace hook_list_clear() -> string_list_clear_func()
hook: detect & emit two more bugs
hook: rename cb_data_free/alloc -> hook_data_free/alloc
hook: fix minor style issues
builtin/receive-pack: properly init receive_hook strbuf
hook: move unsorted_string_list_remove() to string-list.[ch]
|
|
Fix some minor style nits pointed out by Patrick, Junio and Eric:
* Use CALLOC_ARRAY instead of xcalloc.
* Init struct members during declaration.
* Simplify if condition boolean logic.
* Missing curly braces in if/else stmts.
* Unnecessary header includes.
* Capitalization and full-stop in error/warn messages.
* Curly brace on separate line when defining struct.
* Comment spelling: free'd -> freed.
* Sort the included headers.
* Blank line fixes to improve readability.
These contain no logic changes, the code behaves the same as before.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* jk/transport-color-leakfix:
transport: plug leaks in transport_color_config()
|
|
We retrieve config values with repo_config_get_string(), which will
allocate a new copy of the string for us. But we don't hold on to those
strings, since they are just fed to git_config_colorbool() and
color_parse(). But nor do we free them, which means they leak.
We can fix this by using the "_tmp" form of repo_config_get_string(),
which just hands us a pointer directly to the internal storage. This is
OK for our purposes, since we don't need it to last for longer than our
parsing calls.
Two interesting side notes here:
1. Many types already have a repo_config_get_X() variant that handles
this for us (e.g., repo_config_get_bool()). But neither colorbools
nor colors themselves have such helpers. We might think about
adding them, but converting all callers is a larger task, and out
of scope for this fix.
2. As far as I can tell, this leak has been there since 960786e761
(push: colorize errors, 2018-04-21), but wasn't detected by LSan in
our test suite. It started triggering when we applied dd3693eb08
(transport-helper, connect: use clean_on_exit to reap children on
abnormal exit, 2026-03-12) which is mostly unrelated.
Even weirder, it seems to trigger only with clang (and not gcc),
and only with GIT_TEST_DEFAULT_REF_FORMAT=reftable. So I think this
is another odd case where the pointers happened to be hanging
around in stack memory, but changing the pattern of function calls
in nearby code was enough for them to be incidentally overwritten.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow hook commands to be defined (possibly centrally) in the
configuration files, and run multiple of them for the same hook
event.
* ar/config-hooks:
hook: add -z option to "git hook list"
hook: allow out-of-repo 'git hook' invocations
hook: allow event = "" to overwrite previous values
hook: allow disabling config hooks
hook: include hooks from the config
hook: add "git hook list" command
hook: run a list of hooks to prepare for multihook support
hook: add internal state alloc/free callbacks
|
|
Use the hook API to replace ad-hoc invocation of hook scripts via
the run_command() API.
* ar/run-command-hook-take-2:
builtin/receive-pack: avoid spinning no-op sideband async threads
receive-pack: convert receive hooks to hook API
receive-pack: convert update hooks to new API
run-command: poll child input in addition to output
hook: add jobs option
reference-transaction: use hook API instead of run-command
transport: convert pre-push to hook API
hook: allow separate std[out|err] streams
hook: convert 'post-rewrite' hook in sequencer.c to hook API
hook: provide stdin via callback
run-command: add stdin callback for parallelization
run-command: add helper for pp child states
t1800: add hook output stream tests
|
|
* ar/config-hooks: (21 commits)
builtin/receive-pack: avoid spinning no-op sideband async threads
hook: add -z option to "git hook list"
hook: allow out-of-repo 'git hook' invocations
hook: allow event = "" to overwrite previous values
hook: allow disabling config hooks
hook: include hooks from the config
hook: add "git hook list" command
hook: run a list of hooks to prepare for multihook support
hook: add internal state alloc/free callbacks
receive-pack: convert receive hooks to hook API
receive-pack: convert update hooks to new API
run-command: poll child input in addition to output
hook: add jobs option
reference-transaction: use hook API instead of run-command
transport: convert pre-push to hook API
hook: allow separate std[out|err] streams
hook: convert 'post-rewrite' hook in sequencer.c to hook API
hook: provide stdin via callback
run-command: add stdin callback for parallelization
run-command: add helper for pp child states
...
|
|
"auto filter" logic for large-object promisor remote.
* cc/lop-filter-auto:
fetch-pack: wire up and enable auto filter logic
promisor-remote: change promisor_remote_reply()'s signature
promisor-remote: keep advertised filters in memory
list-objects-filter-options: support 'auto' mode for --filter
doc: fetch: document `--filter=<filter-spec>` option
fetch: make filter_options local to cmd_fetch()
clone: make filter_options local to cmd_clone()
promisor-remote: allow a client to store fields
promisor-remote: refactor initialising field lists
|
|
Some hooks use opaque structs to keep internal state between callbacks.
Because hooks ran sequentially (jobs == 1) with one command per hook,
these internal states could be allocated on the stack for each hook run.
Next commits add the ability to run multiple commands for each hook, so
the states cannot be shared or stored on the stack anymore, especially
since down the line we will also enable parallel execution (jobs > 1).
Add alloc/free helpers for each hook, doing a "deep" alloc/init & free
of their internal opaque struct.
The alloc callback takes a context pointer, to initialize the struct at
at the time of resource acquisition.
These callbacks must always be provided together: no alloc without free
and no free without alloc, otherwise a BUG() is triggered.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previous commits have set up an infrastructure for `--filter=auto` to
automatically prepare a partial clone filter based on what the server
advertised and the client accepted.
Using that infrastructure, let's now enable the `--filter=auto` option
in `git clone` and `git fetch` by setting `allow_auto_filter` to 1.
Note that these small changes mean that when `git clone --filter=auto`
or `git fetch --filter=auto` are used, "auto" is automatically saved
as the partial clone filter for the server on the client. Therefore
subsequent calls to `git fetch` on the client will automatically use
this "auto" mode even without `--filter=auto`.
Let's also set `allow_auto_filter` to 1 in `transport.c`, as the
transport layer must be able to accept the "auto" filter spec even if
the invoking command hasn't fully parsed it yet.
When an "auto" filter is requested, let's have the "fetch-pack.c" code
in `do_fetch_pack_v2()` compute a filter and send it to the server.
In `do_fetch_pack_v2()` the logic also needs to check for the
"promisor-remote" capability and call `promisor_remote_reply()` to
parse advertised remotes and populate the list of those accepted (and
their filters).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recent glibc 2.43 release had the following change listed in its
NEWS file:
For ISO C23, the functions bsearch, memchr, strchr, strpbrk, strrchr,
strstr, wcschr, wcspbrk, wcsrchr, wcsstr and wmemchr that return
pointers into their input arrays now have definitions as macros that
return a pointer to a const-qualified type when the input argument is
a pointer to a const-qualified type.
When compiling with GCC 15, which defaults to -std=gnu23, this causes
many warnings like this:
merge-ort.c: In function ‘apply_directory_rename_modifications’:
merge-ort.c:2734:36: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
2734 | char *last_slash = strrchr(cur_path, '/');
| ^~~~~~~
This patch fixes the more obvious ones by making them const when we do
not write to the returned pointer.
Signed-off-by: Collin Funk <collin.funk1@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the pre-push hook from custom run-command invocations to
the new hook API which doesn't require a custom child_process
structure and signal toggling.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit f406b8955295d01089ba2baf35eceadff2d11cae,
reversing changes made to 1627809eeff75e6ec936fc609e7be46d5eb2fa9e.
It seems to have caused a few regressions, two of the three known
ones we have proposed solutions for. Let's give ourselves a bit
more room to maneuver during the pre-release freeze period and
restart once the 2.53 ships.
|
|
Move the pre-push hook from custom run-command invocations to
the new hook API which doesn't require a custom child_process
structure and signal toggling.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some places in the code confused a variable that is *not* a boolean
to enable color but is an enum that records what the user requested
to do about color. A couple of bugs of this sort have been fixed,
while the code has been cleaned up to prevent similar bugs in the
future.
* jk/color-variable-fixes:
config: store want_color() result in a separate bool
add-interactive: retain colorbool values longer
color: return bool from want_color()
color: use git_colorbool enum type to store colorbools
pretty: use format_commit_context.auto_color as colorbool
diff: stop passing ecbdata->use_color as boolean
diff: pass o->use_color directly to fill_metainfo()
diff: don't use diff_options.use_color as a strict bool
diff: simplify color_moved check when flushing
grep: don't treat grep_opt.color as a strict bool
color: return enum from git_config_colorbool()
color: use GIT_COLOR_* instead of numeric constants
|
|
We traditionally used "int" to store and pass around the values defined
by "enum git_colorbool" (which were originally just #define macros).
Using an int doesn't produce incorrect results, but using the actual
enum makes the intent of the code more clear.
It would be nice if the compiler could catch cases where we used the
enum and an int interchangeably, since it's very easy to accidentally
check the boolean true/false of a colorbool like:
if (branch_use_color)
This is wrong because GIT_COLOR_UNKNOWN and GIT_COLOR_AUTO evaluate to
true in C, even though we may ultimately decide not to use color. But C
is pretty happy to convert between ints and enums (even with various
-Wenum-* warnings). So this sadly doesn't protect us from such mistakes,
but it hopefully does make the code easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
string_list_split*() family of functions have been extended to
simplify common use cases.
* jc/string-list-split:
string-list: split-then-remove-empty can be done while splitting
string-list: optionally omit empty string pieces in string_list_split*()
diff: simplify parsing of diff.colormovedws
string-list: optionally trim string pieces split by string_list_split*()
string-list: unify string_list_split* functions
string-list: align string_list_split() with its _in_place() counterpart
string-list: report programming error with BUG
|
|
The string_list_split_in_place() function was updated by 52acddf3
(string-list: multi-delimiter `string_list_split_in_place()`,
2023-04-24) to take more than one delimiter characters, hoping that
we can later use it to replace our uses of strtok(). We however did
not make a matching change to the string_list_split() function,
which is very similar.
Before giving both functions more features in future commits, allow
string_list_split() to also take more than one delimiter characters
to make them closer to each other.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a large variety of data formats and protocols where no hash
algorithm was defined and the default was assumed to always be SHA-1.
Instead of explicitly stating SHA-1, let's use the constant to represent
the legacy hash algorithm (which is still SHA-1) so that it's clear
for documentary purposes that it's a legacy fallback option and not an
intentional choice to use SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --atomic --porcelain" used to ignore failures from the
other side, losing the error status from the child process, which
has been corrected.
* ps/send-pack-unhide-error-in-atomic-push:
send-pack: gracefully close the connection for atomic push
t5543: atomic push reports exit code failure
send-pack: new return code "ERROR_SEND_PACK_BAD_REF_STATUS"
t5548: add porcelain push test cases for dry-run mode
t5548: add new porcelain test cases
t5548: refactor test cases by resetting upstream
t5548: refactor to reuse setup_upstream() function
t5504: modernize test by moving heredocs into test bodies
|
|
The code path used when "git fetch" fetches from a bundle file
closed the same file descriptor twice, which sometimes broke things
unexpectedly when the file descriptor was reused, which has been
corrected.
* js/bundle-unbundle-fd-reuse-fix:
bundle: avoid closing file descriptor twice
|
|
Patrick reported an issue that the exit code of git-receive-pack(1) is
ignored during atomic push with "--porcelain" flag, and added new test
cases in t5543.
This issue originated from commit 7dcbeaa0df (send-pack: fix
inconsistent porcelain output, 2020-04-17). At that time, I chose to
ignore the exit code of "finish_connect()" without investigating the
root cause of the abnormal termination of git-receive-pack. That was an
incorrect solution.
The root cause is that an atomic push operation terminates early without
sending a flush packet to git-receive-pack. As a result,
git-receive-pack continues waiting for commands without exiting. By
sending a flush packet at the appropriate location in "send_pack()", we
ensure that the git-receive-pack process closes properly, avoiding an
erroneous exit code for git-push. At the same time, revert the changes
to the "transport.c" file made in commit 7dcbeaa0df.
Reported-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "push_refs" function in the transport_vtable is the handler for
git-push operation. All the "push_refs" functions for different
transports (protocols) should have the same behavior, but the behavior
of "git_transport_push()" function for builtin_smart_vtable in
"transport.c" (which calls "send_pack()" in "send-pack.c") differs from
the handler of the HTTP protocol.
The "push_refs()" function for the HTTP protocol which calls the
"push_refs_with_push()" function in "transport-helper.c" will return 0
even when a bad REF_STATUS (such as REF_STATUS_REJECT_NONFASTFORWARD)
was found. But "send_pack()" for Git smart protocol will return -1 for
a bad REF_STATUS.
We cannot ignore bad REF_STATUS directly in the "send_pack()" function,
because the function is also used in "builtin/send-pack.c". So we add a
new non-zero error code "SEND_PACK_ERROR_REF_STATUS" for "send_pack()".
Ignore the specific error code in the "git_transport_push()" function to
have the same behavior as "push_refs()" for HTTP protocol. Note that
even though we ignore the error here, we'll ultimately still end up
detecting that a subset of refs was not pushed in `transport_push()`
because we eventually call `push_had_errors()` on the remote refs.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Already when introduced in c7a8a16239 (Add bundle transport,
2007-09-10), the `bundle` transport had a bug where it would open a file
descriptor to the bundle file and then close it _twice_: First, the file
descriptor (`data->fd`) is passed to `unbundle()`, which would use it as
the `stdin` of the `index-pack` process, which as a consequence would
close it via `start_command()`. However, `data->fd` would still hold the
numerical value of the file descriptor, and `close_bundle()` would see
that and happily close it again.
This seems not to have caused too many problems in almost two decades,
but I encountered a situation today where it _does_ cause problems: In
i686 variants of Git for Windows, it seems that file descriptors are
reused quickly after they have been closed.
In the particular scenario I faced, `git fetch <bundle> <ref>` gets the
same file descriptor value when opening the bundle file and importing
its embedded packfile (which implicitly closes the file descriptor) and
then when opening a pack file in `fetch_and_consume_refs()` while
looking up an object's header.
Later on, after the bundle has been imported (and the `close_bundle()`
function erroneously closes the file descriptor that has _already_ been
closed when using it as `stdin` for `git index-pack`), the same file
descriptor value has now been reused via `use_pack()`. Now, when either
the recursive fetch (which defaults to "on", unfortunately) or a
commit-graph update needs to `mmap()` the packfile, it fails due to a
now-invalid file descriptor that _should_ point to the pack file but
doesn't anymore.
To fix that, let's invalidate `data->fd` after calling `unbundle()`.
That way, `close_bundle()` does not close a file descriptor that may
have been reused for something different. While at it, document that
`unbundle()` closes the file descriptor, and ensure that it also does
that when failing to verify the bundle.
Luckily, this bug does not affect the bundle URI feature, it only
affects the `git fetch <bundle>` code path.
Note that this patch does not _completely_ clarifies who is responsible
to close that file descriptor, as `run_command()` may fail _without_
closing `cmd->in`. Addressing this issue thoroughly, however, would
require a rather thorough re-design of the `start_command()` and
`finish_command()` functionality to make it a lot less murky who is
responsible for what file descriptors.
At least this here patch is relatively easy to reason about, and
addresses a hard failure (`fatal: mmap: could not determine filesize`)
at the expense of leaking a file descriptor under very rare
circumstances in which `git fetch` would error out anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
|
Stop using `the_repository` in the "send-pack" subsystem by passing in a
repository when sending a packfile.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
|
We have a bunch of loops which iterate up to an unsigned boundary using
a signed index, which generates warnigs because we compare a signed and
unsigned value in the loop condition. Address these sites for trivial
cases and enable `-Wsign-compare` warnings for these code units.
This patch only adapts those code units where we can drop the
`DISABLE_SIGN_COMPARE_WARNINGS` macro in the same step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching directly from a bundle, fsck message severity
configuration is not propagated to the underlying git-index-pack(1). It
is only capable of enabling or disabling fsck checks entirely. This does
not align with the fsck behavior for fetches through git-fetch-pack(1).
Use the fsck config parsing from fetch-pack to populate fsck message
severity configuration and wire it through to `unbundle()` to enable the
same fsck verification as done through fetch-pack.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `unbundle()` is invoked, fsck verification may be configured by
passing the `VERIFY_BUNDLE_FSCK` flag. This mechanism allows fsck checks
on the bundle to be enabled or disabled entirely. To facilitate more
fine-grained fsck configuration, additional context must be provided to
`unbundle()`.
Introduce the `unbundle_opts` type, which wraps the existing
`verify_bundle_flags`, to facilitate future extension of `unbundle()`
configuration. Also update `unbundle()` and its call sites to accept
this new options type instead of the flags directly. The end behavior is
functionally the same, but allows for the set of configurable options to
be extended. This is leveraged in a subsequent commit to enable fsck
message severity configuration.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Utilize the `server_options` from the corresponding remote during the
handshake in `transport.c` when Git protocol v2 is detected. This helps
initialize the `server_options` in `transport.h:transport` if no server
options are set for the transport (typically via `--server-option` or
`-o`).
While another potential place to incorporate server options from the
remote is in `transport.c:transport_get`, setting server options for a
transport using a protocol other than v2 could lead to unexpected errors
(see `transport.c:die_if_server_options`).
Relevant tests and documentation have been updated accordingly.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the `parse_transport_option()` method to parse the `push.pushOption`
configuration. This method will also be used in the next commit to
handle the new `remote.<name>.serverOption` configuration for setting
server options in Git protocol v2.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling `fetch_pack()` the caller is expected to pass in a set of
sought-after refs that they want to fetch. This array gets massaged to
not contain duplicate entries, which is done by replacing duplicate refs
with `NULL` pointers. This modifies the caller-provided array, and in
case we do unset any pointers the caller now loses track of that ref and
cannot free it anymore.
Now the obvious fix would be to not only unset these pointers, but to
also free their contents. But this doesn't work because callers continue
to use those refs. Another potential solution would be to copy the array
in `fetch_pack()` so that we dont modify the caller-provided one. But
that doesn't work either because the NULL-ness of those entries is used
by callers to skip over ref entries that we didn't even try to fetch in
`report_unmatched_refs()`.
Instead, we make it the responsibility of our callers to duplicate these
arrays as needed. It ain't pretty, but it works to plug the memory leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even more leak fixes.
* ps/leakfixes-part-5:
transport: fix leaking negotiation tips
transport: fix leaking arguments when fetching from bundle
builtin/fetch: fix leaking transaction with `--atomic`
remote: fix leaking peer ref when expanding refmap
remote: fix leaks when matching refspecs
remote: fix leaking config strings
builtin/fetch-pack: fix leaking refs
sideband: fix leaks when configuring sideband colors
builtin/send-pack: fix leaking refspecs
transport: fix leaking OID arrays in git:// transport data
t/helper: fix leaking multi-pack-indices in "read-midx"
builtin/repack: fix leaks when computing packs to repack
midx-write: fix leaking hashfile on error cases
builtin/archive: fix leaking `OPT_FILENAME()` value
builtin/upload-archive: fix leaking args passed to `write_archive()`
builtin/merge-tree: fix leaking `-X` strategy options
pretty: fix leaking key/value separator buffer
pretty: fix memory leaks when parsing pretty formats
convert: fix leaks when resetting attributes
mailinfo: fix leaking header data
|
|
Use of API functions that implicitly depend on the_repository
object in the config subsystem has been rewritten to pass a
repository object through the callchain.
* ps/config-wo-the-repository:
config: hide functions using `the_repository` by default
global: prepare for hiding away repo-less config functions
config: don't depend on `the_repository` with branch conditions
config: don't have setters depend on `the_repository`
config: pass repo to functions that rename or copy sections
config: pass repo to `git_die_config()`
config: pass repo to `git_config_get_expiry_in_days()`
config: pass repo to `git_config_get_expiry()`
config: pass repo to `git_config_get_max_percent_split_change()`
config: pass repo to `git_config_get_split_index()`
config: pass repo to `git_config_get_index_threads()`
config: expose `repo_config_clear()`
config: introduce missing setters that take repo as parameter
path: hide functions using `the_repository` by default
path: stop relying on `the_repository` in `worktree_git_path()`
path: stop relying on `the_repository` when reporting garbage
hooks: remove implicit dependency on `the_repository`
editor: do not rely on `the_repository` for interactive edits
path: expose `do_git_common_path()` as `repo_common_pathv()`
path: expose `do_git_path()` as `repo_git_pathv()`
|
|
We do not free negotiation tips in the transport's smart options. Fix
this by freeing them on disconnect.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `fetch_refs_from_bundle()` we assemble a vector of arguments to pass
to `unbundle()`, but never free it. And in theory we wouldn't have to
because `unbundle()` already knows to free the vector for us. But it
fails to do so when it exits early due to `verify_bundle()` failing.
The calling convention that the arguments are freed by the callee and
not the caller feels somewhat weird. Refactor the code such that it is
instead the responsibility of the caller to free the vector, adapting
the only two callsites where we pass extra arguments. This also fixes
the memory leak.
This memory leak gets hit in t5510, but fixing it isn't sufficient to
make the whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The transport data for the "git://" protocol contains two OID arrays
that we never free, creating a memory leak. Plug them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We implicitly depend on `the_repository` in our hook subsystem because
we use `strbuf_git_path()` to compute hook paths. Remove this dependency
by accepting a `struct repository` as parameter instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Transport URLs can be prefixed with "foo::", which would tell us that
the transport uses a remote helper called "foo". We extract the helper
name by `xstrndup()`ing the prefix before the double-colons, but never
free that string.
Fix this leak by assigning the result to a separate local variable that
we can then free upon returning.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When bundleURI interface fetches multiple bundles, Git failed to
take full advantage of all bundles and ended up slurping duplicated
objects.
* xx/bundie-uri-fixes:
unbundle: extend object verification for fetches
fetch-pack: expose fsckObjects configuration logic
bundle-uri: verify oid before writing refs
|
|
Memory ownership rules for the in-core representation of
remote.*.url configuration values have been straightened out, which
resulted in a few leak fixes and code clarification.
* jk/remote-wo-url:
remote: drop checks for zero-url case
remote: always require at least one url in a remote
t5801: test remote.*.vcs config
t5801: make remote-testgit GIT_DIR setup more robust
remote: allow resetting url list
config: document remote.*.url/pushurl interaction
remote: simplify url/pushurl selection
remote: use strvecs to store remote url/pushurl
remote: transfer ownership of memory in add_url(), etc
remote: refactor alias_url() memory ownership
archive: fix check for missing url
|
|
The existing fetch.fsckObjects and transfer.fsckObjects configurations
were not fully applied to bundle-involved fetches, including direct
bundle fetches and bundle-uri enabled fetches. Furthermore, there was no
object verification support for unbundle.
This commit extends object verification support in `bundle.c:unbundle`
by adding the `VERIFY_BUNDLE_FSCK` option to `verify_bundle_flags`. When
this option is enabled, we append the `--fsck-objects` flag to
`git-index-pack`.
The `VERIFY_BUNDLE_FSCK` option is now used by bundle-involved fetches,
where we use `fetch-pack.c:fetch_pack_fsck_objects` to determine whether
to enable this option for `bundle.c:unbundle`, specifically in:
- `transport.c:fetch_refs_from_bundle` for direct bundle fetches.
- `bundle-uri.c:unbundle_from_file` for bundle-uri enabled fetches.
This addition ensures a consistent logic for object verification during
fetches. Tests have been added to confirm functionality in the scenarios
mentioned above.
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the previous commit removed the possibility that a "struct
remote" will ever have zero url fields, we can drop a number of
redundant checks and untriggerable code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
