| Age | Commit message (Collapse) | Author |
|---|
|
* ar/config-hooks: (21 commits)
builtin/receive-pack: avoid spinning no-op sideband async threads
hook: add -z option to "git hook list"
hook: allow out-of-repo 'git hook' invocations
hook: allow event = "" to overwrite previous values
hook: allow disabling config hooks
hook: include hooks from the config
hook: add "git hook list" command
hook: run a list of hooks to prepare for multihook support
hook: add internal state alloc/free callbacks
receive-pack: convert receive hooks to hook API
receive-pack: convert update hooks to new API
run-command: poll child input in addition to output
hook: add jobs option
reference-transaction: use hook API instead of run-command
transport: convert pre-push to hook API
hook: allow separate std[out|err] streams
hook: convert 'post-rewrite' hook in sequencer.c to hook API
hook: provide stdin via callback
run-command: add stdin callback for parallelization
run-command: add helper for pp child states
...
|
|
Running `git` commands inside command substitutions like
test "$(git rev-parse A)" = "$(git rev-parse B)"
can hide failures from the `git` invocations and provide little
diagnostic information when `test` fails.
Use `test_cmp` when comparing against a stored expected value so
mismatches show both expected and actual output. Use `test_cmp_rev`
when comparing two revisions. These helpers produce clearer failure
output, making it easier to understand what went wrong.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Francesco Paparatto <francescopaparatto@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using "--cover-letter" we can tell format-patch to generate a cover
letter, in this cover letter there's a list of commits included in the
patch series and the format is specified by the "--cover-letter-format"
option. Would be useful if this format could be configured from the
config file instead of always needing to pass it from the command line.
Teach format-patch how to read the format spec for the cover letter from
the config files. The variable it should look for is called
format.commitListFormat.
Possible values:
- commitListFormat is set but no string is passed: it will default to
"[%(count)/%(total)] %s"
- if a string is passed: will use it as a format spec. Note that this
is either "shortlog" or a format spec prefixed by "log:"
e.g."log:%s (%an)"
- if commitListFormat is not set: it will default to the shortlog
format.
Signed-off-by: Mirko Faina <mroik@delayed.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Often when sending patch series there's a need to clarify to the
reviewer what's the purpose of said series, since it might be difficult
to understand it from reading the commits messages one by one.
"git format-patch" provides the useful "--cover-letter" flag to declare
if we want it to generate a template for us to use. By default it will
generate a "git shortlog" of the changes, which developers find less
useful than they'd like, mainly because the shortlog groups commits by
author, and gives no obvious chronological order.
Give format-patch the ability to specify an alternative format spec
through the "--cover-letter-format" option. This option either takes
"shortlog", which is the current format, or a format spec prefixed with
"log:".
Example:
git format-patch --cover-letter \
--cover-letter-format="log:[%(count)/%(total)] %s (%an)" HEAD~3
[1/3] this is a commit summary (Mirko Faina)
[2/3] this is another commit summary (Mirko Faina)
...
Signed-off-by: Mirko Faina <mroik@delayed.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new --trailer=<trailer> option to git rebase to append trailer
lines to each rewritten commit message (merge backend only).
Because the apply backend does not provide a commit-message filter,
reject --trailer when --apply is in effect and require the merge backend
instead.
This option implies --force-rebase so that fast-forwarded commits are
also rewritten. Validate trailer arguments early to avoid starting an
interactive rebase with invalid input.
Add integration tests covering error paths and trailer insertion across
non-interactive and interactive rebases.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the setup logic into a 'test_expect_success' block.
This ensures that the code is properly tracked by the test harness.
Additionally, we use the 'test_when_finished' helper at the start of
the block to ensure that the 'import' directory is removed even if the
test fails.
This is cleaner than the previous manual 'rm -rf import' approach.
Signed-off-by: Siddharth Shrimali <r.siddharth.shrimali@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace oidmap's use of hashmap_clear_() and layout-dependent freeing
with an explicit iteration and optional free callback. This removes
reliance on struct layout assumptions while keeping the existing API
intact.
Add tests for oidmap_clear_with_free behavior.
test_oidmap__clear_with_free_callback verifies that entries are freed
when a callback is provided, while
test_oidmap__clear_without_free_callback verifies that entries are not
freed when no callback is given. These tests ensure the new clear
implementation behaves correctly and preserves ownership semantics.
Signed-off-by: Seyi Kuforiji <kuforiji98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"fsck" iterates over packfiles and its access to pack data caused
the list to be permuted, which caused it to loop forever; the code
to access pack data by "fsck" has been updated to avoid this.
* ps/fsck-stream-from-the-right-object-instance:
pack-check: fix verification of large objects
packfile: expose function to read object stream for an offset
object-file: adapt `stream_object_signature()` to take a stream
t/helper: improve "genrandom" test helper
|
|
Test fixup.
* pt/t7527-flake-workaround:
t7527: fix flaky fsmonitor event tests with retry logic
|
|
"git config list" is taught to show the values interpreted for
specific type with "--type=<X>" option.
* ds/config-list-with-type:
config: use an enum for type
config: restructure format_config()
config: format colors quietly
color: add color_parse_quietly()
config: format expiry dates quietly
config: format paths gently
config: format bools or strings in helper
config: format bools or ints gently
config: format bools gently
config: format int64s gently
config: make 'git config list --type=<X>' work
config: add 'gently' parameter to format_config()
config: move show_all_config()
|
|
Clean-up the code around "git repo info" command.
* lo/repo-leftover-bits:
Documentation/git-repo: capitalize format descriptions
Documentation/git-repo: replace 'NUL' with '_NUL_'
t1901: adjust nul format output instead of expected value
t1900: rename t1900-repo to t1900-repo-info
repo: rename struct field to repo_info_field
repo: replace get_value_fn_for_key by get_repo_info_field
repo: rename repo_info_fields to repo_info_field
CodingGuidelines: instruct to name arrays in singular
|
|
"git maintenance" starts using the "geometric" strategy by default.
* ps/maintenance-geometric-default:
builtin/maintenance: use "geometric" strategy by default
t7900: prepare for switch of the default strategy
t6500: explicitly use "gc" strategy
t5510: explicitly use "gc" strategy
t5400: explicitly use "gc" strategy
t34xx: don't expire reflogs where it matters
t: disable maintenance where we verify object database structure
t: fix races caused by background maintenance
|
|
"git apply --directory=./un/../normalized/path" now normalizes the
given path before using it.
* jr/apply-directory-normalize:
apply: normalize path in --directory argument
|
|
API clean-up for the worktree subsystem.
* pw/no-more-NULL-means-current-worktree:
path: remove repository argument from worktree_git_path()
wt-status: avoid passing NULL worktree
|
|
"git fetch --deepen" that tries to go beyond merged branch used to
get confused where the updated shallow points are, which has been
corrected.
* sp/shallow-deepen-relative-fix:
shallow: handling fetch relative-deepen
shallow: free local object_array allocations
|
|
Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
|
|
The order of output when multiple branches are specified on the
configuration variable was not clearly spelled out in the
documentation.
Add a paragraph to describe the order and also how the branches are
deduplicated. Update t6040 with additional tests to illustrate how
multiple branches are shown and deduplicated.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
[jc: made a whole replacement into incremental; wrote log message.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'read_gitfile_gently()' treats any non-regular file as
'READ_GITFILE_ERR_NOT_A_FILE' and fails to discern between 'ENOENT'
and other stat failures. This flawed error reporting is noted by two
'NEEDSWORK' comments.
Address these comments by introducing two new error codes:
'READ_GITFILE_ERR_MISSING'(which groups the "file missing" scenarios
together) and 'READ_GITFILE_ERR_IS_A_DIR':
1. Update 'read_gitfile_error_die()' to treat 'IS_A_DIR', 'MISSING',
'NOT_A_FILE' and 'STAT_FAILED' as non-fatal no-ops. This accommodates
intentional non-repo scenarios (e.g., GIT_DIR=/dev/null).
2. Explicitly catch 'NOT_A_FILE' and 'STAT_FAILED' during
discovery and call 'die()' if 'die_on_error' is set.
3. Unconditionally pass '&error_code' to 'read_gitfile_gently()'.
4. Only invoke 'is_git_directory()' when we explicitly receive
'READ_GITFILE_ERR_IS_A_DIR', avoiding redundant checks.
Additionally, audit external callers of 'read_gitfile_gently()' in
'submodule.c' and 'worktree.c' to accommodate the refined error codes.
Signed-off-by: Tian Yuchen <a3205153416@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When be76c21282 (fetch: ensure submodule objects fetched, 2018-12-06)
added support for fetching a missing submodule object by id, it
hardcoded the remote name as "origin" and deferred anything more
complicated for a later patch. Implement the NEEDSWORK item to remove
the hardcoded assumption by adding and using a submodule helper subcmd
'get-default-remote'. Fixing this lets 'git fetch --recurse-submodules'
succeed when the fetched commit(s) in the superproject trigger a
submodule fetch, and that submodule's default remote name is not
"origin".
Add non-"origin" remote tests to t5526-fetch-submodules.sh and
t5572-pull-submodule.sh demonstrating this works as expected and add
dedicated tests for get-default-remote.
Signed-off-by: Nasser Grainawi <nasser.grainawi@oss.qualcomm.com>
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is quite a common use case that one wants to split up one commit into
multiple commits by moving parts of the changes of the original commit
out into a separate commit. This is quite an involved operation though:
1. Identify the commit in question that is to be dropped.
2. Perform an interactive rebase on top of that commit's parent.
3. Modify the instruction sheet to "edit" the commit that is to be
split up.
4. Drop the commit via "git reset HEAD~".
5. Stage changes that should go into the first commit and commit it.
6. Stage changes that should go into the second commit and commit it.
7. Finalize the rebase.
This is quite complex, and overall I would claim that most people who
are not experts in Git would struggle with this flow.
Introduce a new "split" subcommand for git-history(1) to make this way
easier. All the user needs to do is to say `git history split $COMMIT`.
From hereon, Git asks the user which parts of the commit shall be moved
out into a separate commit and, once done, asks the user for the commit
message. Git then creates that split-out commit and applies the original
commit on top of it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace 'grep' and '! grep' invocations with 'test_grep' and
'test_grep !'. This provides better debugging output if tests fail
in the future, as 'test_grep' will automatically print the
contents of the file when a check fails.
While at it, update any remaining instances of 'grep' to 'test_grep'
that were missed in the previous versions to ensure that the entire
file is consistent with modern project style.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Siddharth Shrimali <r.siddharth.shrimali@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace pipelines involving git commands with temporary files (actual)
to ensure that any crashes or unexpected exit codes from the git
commands are properly caught by the test suite. A simple pipeline
like 'git foo | grep bar' ignores the exit code of 'git', which
can hide regressions.
In cases where we were counting lines with 'wc -l' to ensure a
pattern was absent, simplify the logic to use '! grep' to avoid
subshells entirely.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Siddharth Shrimali <r.siddharth.shrimali@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A prefetch call can be triggered to access a stale diff_queue entry
after diffcore-break breaks a filepair into two and freed the
original entry that is no longer used, leading to a segfault, which
has been corrected.
* hy/diff-lazy-fetch-with-break-fix:
diffcore-break: avoid segfault with freed entries
|
|
"git add -p" learned a new mode that allows the user to revisit a
file that was already dealt with.
* aa/add-p-no-auto-advance:
add-patch: allow interfile navigation when selecting hunks
add-patch: allow all-or-none application of patches
add-patch: modify patch_update_file() signature
interactive -p: add new `--auto-advance` flag
|
|
Test code clean-up.
* lg/t2004-test-path-is-helpers:
t2004: use test_path_is_file instead of test -f
|
|
When run in a worktree, the GIT_DIR directory is set in a different way
than in a typical repository. Show this by updating t0068 to include a
worktree and add a test that runs from that worktree. This requires
moving the repo.key config into a global config instead of the base test
repository's local config (demonstrating that it worked with
non-worktree Git repositories).
We need to be careful to unset the local Git environment variables and
let the child process rediscover them, while also reinstating those
variables in the parent process afterwards. Update run_command_on_repo()
to use the new sanitize_repo_env() helper method to erase these
environment variables.
During review of this bug fix, there were several incorrect patches
demonstrating different bad behaviors. Most of these are covered by
tests, when it is not too expensive to set it up. One case that would be
expensive to set up is the GIT_NO_REPLACE_OBJECTS environment variable,
but we trust that using sanitize_repo_env() will be sufficient to
capture these uncovered cases by using the common code for resetting
environment variables.
Reported-by: Matthew Gabeler-Lee <fastcat@gmail.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git for-each-repo' tool is frequently run outside of a repo context
in the real world. For example, it powers background maintenance.
Despite this typical case, we have not been testing it without a local
repository.
Update t0068 to stop creating a test repo and to use global config
everywhere. This has some subtle changes to test across the file.
This was noticed because an earlier attempt to remove the_repository
from builtin/for-each-repo.c did not catch a segmentation fault since
the passed 'repo' is NULL. This use of the_repository will need to stay
until we have a better way to handle config queries outside of a repo
context. Similar use still exists in builtin/config.c for the same
reason.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After a diff algorithm has been run, the compaction phase
(xdl_change_compact()) shifts and merges change groups to produce a
cleaner output. However, this shifting could create a new matched group
where both sides now have matching lines. This results in a
wrong-looking diff output which contains redundant lines that are the
same on both files.
Fix this by detecting this situation, and re-diff the texts on each side
to find similar lines, using the fall-back Myer's diff. Only do this for
histogram diff as it's the only algorithm where this is relevant. Below
contains an example, and more details.
For an example, consider two files below:
file1:
A
A
A
A
A
A
A
file2:
A
A
x
A
A
A
A
When using Myer's diff, the algorithm finds that only the "x" has been
changed, and produces a final diff result (these are line diffs, but
using word-diff syntax for ease of presentation):
A A[-A-]{+x+}A AAA
When using histogram diff, the algorithm first discovers the LCS "A
AAA", which it uses as anchor, then produces an intermediate diff:
{+A Ax+}A AAA[- AAA-].
This is a longer diff than Myer's, but it's still self-consistent.
However, the compaction phase attempts to shift the first file's diff
group upwards (note that this shift crosses the anchor that histogram
had used), leading to the final results for histogram diff:
[-A AA-]{+A Ax+}A AAA
This is a technically correct patch but looks clearly redundant to a
human as the first 3 lines should not be in the diff.
The fix would detect that a shift has caused matching to a new group,
and re-diff the "A AA" and "A Ax" parts, which results in "A A"
correctly re-marked as unchanged. This creates the now correct histogram
diff:
A A[-A-]{+x+}A AAA
This issue is not applicable to Myer's diff algorithm as it already
generates a minimal diff, which means a shift cannot result in a smaller
diff output (the default Myer's diff in xdiff is not guaranteed to be
minimal for performance reasons, but it typically does a good enough
job).
It's also not applicable to patience diff, because it uses only unique
lines as anchor for its splits, and falls back to Myer's diff within
each split. Shifting requires both ends having the same lines, and
therefore cannot cross the unique line boundaries established by the
patience algorithm. In contrast histogram diff uses non-unique lines as
anchors, and therefore shifting can cross over them.
This issue is rare in a normal repository. Below is a table of
repositories (`git log --no-merges -p --histogram -1000`), showing how
many times a re-diff was done and how many times it resulted in finding
matching lines (therefore addressing this issue) with the fix. In
general it is fewer than 1% of diff's that exhibit this offending
behavior:
| Repo (1k commits) | Re-diff | Found matching lines |
|--------------------|---------|----------------------|
| llvm-project | 45 | 11 |
| vim | 110 | 9 |
| git | 18 | 2 |
| WebKit | 168 | 1 |
| ripgrep | 22 | 1 |
| cpython | 32 | 0 |
| vscode | 13 | 0 |
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Additional tests were introduced to see the interaction with netrc
auth with auth failure on the http transport.
* ag/http-netrc-tests:
t5550: add netrc tests for http 401/403
|
|
The size of a tree object usually corresponds with the number of entries
it has. While iterating through objects in the repository for
git-repo-structure, identify the tree with the most entries and display
it in the output.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Complex merge events may produce an octopus merge where the resulting
merge commit has more than two parents. While iterating through objects
in the repository for git-repo-structure, identify the commit with the
most parents and display it in the output.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "structure" output for git-repo(1) does not show the corresponding
OIDs for the largest objects in its "table" output. Update the output to
include a list of OID annotations with an index to the corresponding row
in the table.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "structure" output for git-repo(1) shows the total inflated and disk
sizes of reachable objects in the repository, but doesn't show the size
of the largest individual objects. Since an individual object may be a
large contributor to the overall repository size, it is useful for users
to know the maximum size of individual objects.
While interating across objects, record the size and OID of the largest
objects encountered for each object type to provide as output. Note that
the default "table" output format only displays size information and not
the corresponding OID. In a subsequent commit, the table format is
updated to add table annotations that mention the OID.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the comments of lib-unicode-nfc-nfd.sh, "that that" was used
unintentionally. Remove the redundant "that" to improve clarity.
Signed-off-by: Siddharth Shrimali <r.siddharth.shrimali@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace old-style path assertions with modern helpers that
provide clearer diagnostic messages on failure. When test -f
fails, the output gives no indication of what went wrong.
These instances were found using:
git grep "test -[efd]" t/
as suggested in the microproject ideas.
Signed-off-by: Francesco Paparatto <francescopaparatto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git diff --find-object=<oid>" is run outside a git repository,
the option parsing callback eagerly resolves the OID via
repo_get_oid(), which reaches get_main_ref_store() and hits a BUG()
assertion because no repository has been set up.
Check startup_info->have_repository before attempting to resolve the
OID, and return a user-friendly error instead.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The is_work_tree_watched() function in fsmonitor-watchman.sample has
two bugs:
1. Wrong variable in error check: After calling watchman_clock(), the
result is stored in $o, but the code checks $output->{error} instead
of $o->{error}. This means errors from the clock command are silently
ignored.
2. Double output violates protocol: When the retry path triggers (the
directory wasn't initially watched), output_result() is called with
the "/" flag, then launch_watchman() is called recursively which
calls output_result() again. This outputs two clock tokens to stdout,
but git's fsmonitor v2 protocol expects exactly one response.
Fix #1 by checking $o->{error} after watchman_clock().
Fix #2 by removing the recursive launch_watchman() call. The "/"
"everything is dirty" flag already tells git to do a full scan, and
git will call the hook again on the next invocation with a valid clock
token.
With the recursive call removed, the $retry guard is no longer needed
since it only existed to prevent infinite recursion. Remove it.
Apply the same fixes to the test helper scripts in t/t7519/.
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a non-ASCII character is detected in the body or subject of the email
the user is prompted with,
Which 8bit encoding should I declare [UTF-8]? foo
After this the input string is validated by the regex, based on the fact
that the charset string will be minimum 4 characters [1]. If the string is
more than 4 letters the email is sent, if not then a second prompt to
confirm is asked to the user,
Are you sure you want to use <foo> [y/N]? y
This relies on a length based regex heuristic check to validate the user
input, and can allow clearly invalid charset names to pass if the input is
greater than 4 characters.
Add a semantic validation of the charset name using the
Encode::find_encoding() which is a bundled module of perl. If the encoding
is not recognized, warn the user and ask for confirmation before proceeding.
After this validation the lenght based validation becomes redundant and also
breaks flow, so change the regex of valid input to any non blank string.
Make the encoding warning logic specific to the 8bit prompt, also add a
unique confirmation prompt which reduces the load on ask(), and improves
maintainability.
Additionally, the wording of the first prompt can confuse the user if not
read properly or under any default assumptions for a yes/no prompt. Change
the wording to make it explicitly clear to the user that the prompt needs a
string input, UTF-8 being the default.
The intended flow is,
Declare which 8bit encoding to use [default: UTF-8]? foobar
'foobar' does not appear to be a valid charset name. Use it anyway [y/N]?
[1]- https://github.com/git/git/commit/852a15d748034eec87adbee73a72689c8936fb8b
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* ap/use-test-seq-f-more:
t: use test_seq -f and pipes in a few more places
|
|
"git format-patch --from=<me>" did not honor the command line
option when writing out the cover letter, which has been corrected.
* mf/format-patch-honor-from-for-cover-letter:
format-patch: fix From header in cover letter
|
|
Extend the alias configuration syntax to allow aliases using
characters outside ASCII alphanumeric (plus '-').
* jh/alias-i18n:
completion: fix zsh alias listing for subsection aliases
alias: support non-alphanumeric names via subsection syntax
alias: prepare for subsection aliases
help: use list_aliases() for alias listing
|
|
Some tests assumed "iconv" is available without honoring ICONV
prerequisite, which has been corrected.
* ps/tests-wo-iconv-fixes:
t6006: don't use iconv(1) without ICONV prereq
t5550: add ICONV prereq to tests that use "$HTTPD_URL/error"
t4205: improve handling of ICONV prerequisite
t40xx: don't use iconv(1) without ICONV prereq
t: don't set ICONV prereq when iconv(1) is missing
|
|
CI update.
* ps/ci-gitlab-msvc-updates:
gitlab-ci: handle failed tests on MSVC+Meson job
gitlab-ci: use "run-test-slice-meson.sh"
ci: make test slicing consistent across Meson/Make
github: fix Meson tests not executing at all
meson: fix MERGE_TOOL_DIR with "--no-bin-wrappers"
ci: don't skip smallest test slice in GitLab
ci: handle failures of test-slice helper
|
|
It does not make much sense to apply the "incomplete-line"
whitespace rule to symbolic links, whose contents almost always
lack the final newline. "git apply" and "git diff" are now taught
to exclude them for a change to symbolic links.
* jc/whitespace-incomplete-line:
whitespace: symbolic links usually lack LF at the end
|
|
"git switch <name>", in an attempt to create a local branch <name>
after a remote tracking branch of the same name gave an advise
message to disambiguate using "git checkout", which has been
updated to use "git switch".
* jc/checkout-switch-restore:
checkout: tell "parse_remote_branch" which command is calling it
checkout: pass program-readable token to unified "main"
|
|
UI improvements for "git history reword".
* ps/history-ergonomics-updates:
Documentation/git-history: document default for "--update-refs="
builtin/history: rename "--ref-action=" to "--update-refs="
builtin/history: replace "--ref-action=print" with "--dry-run"
builtin/history: check for merges before asking for user input
builtin/history: perform revwalk checks before asking for user input
|
|
A handful of places used refs_for_each_ref_in() API incorrectly,
which has been corrected.
* ps/for-each-ref-in-fixes:
bisect: simplify string_list memory handling
bisect: fix misuse of `refs_for_each_ref_in()`
pack-bitmap: fix bug with exact ref match in "pack.preferBitmapTips"
pack-bitmap: deduplicate logic to iterate over preferred bitmap tips
|
|
"git repo info" learns "--keys" action to list known keys.
* lo/repo-info-keys:
repo: add new flag --keys to git-repo-info
repo: rename the output format "keyvalue" to "lines"
|
|
Add test checking the calculation of the diffstat display width when the
`line_prefix`, which is text that goes before the diffstat, contains
ANSI escape codes.
This situation happens, for example, when `git log --stat --graph` is
executed:
* `--stat` will create a diffstat for each commit
* `--graph` will stuff `line_prefix` with the graph portion of the log,
which contains ANSI escape codes to color the text
Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-config stores a key of the form alias..name, it records
it under an empty subsection ([alias ""]). The new subsection-aware
alias lookup would see a non-NULL but zero-length subsection and
fall into the subsection code path, where it required a "command"
key and thus silently ignored the entry.
Normalize an empty subsection to NULL before any further processing
so that entries stored this way continue to work as plain
case-insensitive aliases, matching the pre-subsection behaviour.
Users who relied on alias..name to create an alias literally named
".name" may want to migrate to subsection syntax, which looks less confusing:
[alias ".name"]
command = <value>
Add tests covering both the empty-subsection compatibility case and
the leading-dot alias via the new syntax.
Signed-off-by: Jonatan Holmgren <jonatan@jontes.page>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
