| Age | Commit message (Collapse) | Author |
|---|
|
The way dash 0.5.13 handles non-ASCII contents in here-doc
is buggy and breaks our existing tests, which unfortunately
have been rewritten to avoid triggering the bug.
* ps/dash-buggy-0.5.13-workaround:
t9300: work around partial read bug in Dash v0.5.13
t: work around multibyte bug in quoted heredocs with Dash v0.5.13
|
|
When executing our test suite with Dash v0.5.13.2 one can observe
several test failures that all have the same symptoms: we have a quoted
heredoc that contains multibyte characters, but the final data does not
match what we actually wanted to write. One such example is in t0300,
where we see the diffs like the following:
--- expect-stdout 2026-04-01 07:25:45.249919440 +0000
+++ stdout 2026-04-01 07:25:45.254919509 +0000
@@ -1,5 +1,5 @@
protocol=https
host=example.com
-path=perú.git
+path=perú.git
username=foo
password=bar
While seemingly the same, the data that we've written via the heredoc
contains some invisible bytes. The expected hex representation of the
string is:
7065 72c3 ba2e 6769 74 per...git
But what we actually get instead is this string:
7065 7285 02c3 ba02 852e 6769 74 per.......git
What's important to note here is that the multibyte character exists in
both versions. But in the broken version we see that the bytes are
wrapped in a sequence of "85 02" and "02 85". This is the CTLMBCHAR byte
sequence of Dash, which it uses internally to quote multibyte sequences.
As it turns out, this bug was introduced in c5bf970 (expand: Add
multi-byte support to pmatch, 2024-06-02), which adds multibyte support
to more contexts of Dash. One of these contexts seems to be in heredocs,
and Dash _does_ correctly unquote these multibyte sequences when using
an unquoted heredoc. But the bug seems to be that this unquoting does
not happen in quoted heredocs, and the bug still exists on the latest
"master" branch.
For now, work around the bug by using unquoted heredocs instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a non-ASCII character is detected in the body or subject of the email
the user is prompted with,
Which 8bit encoding should I declare [UTF-8]? foo
After this the input string is validated by the regex, based on the fact
that the charset string will be minimum 4 characters [1]. If the string is
more than 4 letters the email is sent, if not then a second prompt to
confirm is asked to the user,
Are you sure you want to use <foo> [y/N]? y
This relies on a length based regex heuristic check to validate the user
input, and can allow clearly invalid charset names to pass if the input is
greater than 4 characters.
Add a semantic validation of the charset name using the
Encode::find_encoding() which is a bundled module of perl. If the encoding
is not recognized, warn the user and ask for confirmation before proceeding.
After this validation the lenght based validation becomes redundant and also
breaks flow, so change the regex of valid input to any non blank string.
Make the encoding warning logic specific to the 8bit prompt, also add a
unique confirmation prompt which reduces the load on ask(), and improves
maintainability.
Additionally, the wording of the first prompt can confuse the user if not
read properly or under any default assumptions for a yes/no prompt. Change
the wording to make it explicitly clear to the user that the prompt needs a
string input, UTF-8 being the default.
The intended flow is,
Declare which 8bit encoding to use [default: UTF-8]? foobar
'foobar' does not appear to be a valid charset name. Use it anyway [y/N]?
[1]- https://github.com/git/git/commit/852a15d748034eec87adbee73a72689c8936fb8b
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To improve support for symbolic port names in netrc files, this
changes does the following:
- Treat symbolic port names as ports, not protocols in git-credential-netrc
- Validate the SMTP server port provided to send-email
- Convert the above symbolic port names to their numerical values.
Before this change, it was not possible to have a SMTP server port set
to "smtps" in a netrc file (e.g. Emacs' ~/.authinfo.gpg), as it would
be registered as a protocol and break the match for a "smtp" protocol
host, as queried for by git-send-email.
Signed-off-by: Maxim Cournoyer <maxim@guixotic.coop>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* jk/t9001-deflake:
t9001: use a more distinct fake BugID
|
|
In the test "cc list is sanitized", we feed a commit with a variety of
trailers to send-email, and then check its output to see how it handled
them. For most of them, we are grepping for a specific mention of the
header, but there's a "BugID" header which we expect to be ignored. We
confirm this by grepping for "12345", the fake BugID, and making sure it
is not present.
But we can be fooled by false positives! I just tracked down a flaky
test failure here that was caused by matching this unrelated line in the
output:
<20240914090449.612345-1-author@example.com>
which will change from run to run based on the time, pid, etc.
Ideally we'd tighten the regex to make this more specifically, but since
the point is that it _shouldn't_ be mentioned, it's hard to say what the
right match would be (e.g., would there be a leading space?).
Instead, let's just choose a match that is much less likely to appear.
The actual content of the header isn't important, since it's supposed to
be ignored.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" learned "--mailmap" option to allow rewriting the
recipient addresses.
* jk/send-email-mailmap:
send-email: add mailmap support via sendemail.mailmap and --mailmap
check-mailmap: add options for additional mailmap sources
check-mailmap: accept "user@host" contacts
|
|
In some cases, a user may be generating a patch for an old commit which
now has an out-of-date author or other identity. For example, consider a
team member who contributes to an internal fork of an upstream project,
but leaves before this change is submitted upstream.
In this case, the team members company address may no longer be valid,
and will thus bounce when sending email.
This can be manually avoided by editing the generated patch files, or by
carefully using --suppress-<cc|to> options. This requires a lot of
manual intervention and is easy to forget.
Git has support for mapping old email addresses and names to a canonical
name and address via the .mailmap file (and its associated mailmap.file,
mailmap.blob, and log.mailmap options).
Teach git send-email to enable mailmap support for all addresses. This
ensures that addresses point to the canonical real name and email
address.
Add the sendemail.mailmap configuration option and its associated
--mailmap (and --use-mailmap for compatibility with git log) options.
For now, the default behavior is to disable the mailmap in order to
avoid any surprises or breaking any existing setups.
These options support per-identity configuration via the
sendemail.identity configuration blocks. This enables identity-specific
configuration in cases where users may not want to enable support.
In addition, support send-email specific mailmap data via
sendemail.mailmap.file, sendemail.mailmap.blob and their
identity-specific variants.
The intention of these options is to enable mapping addresses which are
no longer valid to a current project or team maintainer. Such mappings
may change the actual person being referred to, and may not make sense
in a traditional mailmap file which is intended for updating canonical
name and address for the same individual.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git send-email has support for converting shorthand alias names to
canonical email addresses via the alias file. It supports a wide variety
of alias file formats based on popular email program file formats.
Other programs, such as b4, would like the ability to convert aliases in
the same way as git send-email without needing to re-implement the logic
for understanding the many file formats.
Teach git send-email a new option, --translate-aliases, which will
enable this functionality. Similar to --dump-aliases, this option works
like a new mode of operation for git send-email.
When run with --translate-aliases, git send-email reads from standard
input and converts any provided alias into its canonical name and email
according to the alias file. Each expanded name and address is printed
to standard output, one per line.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set of aliases used for the pine --dump-aliases test do not
perfectly mesh with the way the pine address book is defined. While
technically all valid, there are some oddities including bob's name
being partially split so that the actual address is returned as
"Bobbyton <bob@example.com>". A strict reading of the pine documentation
indicates that the address should either be of the form
"address@domain" or a comma separated list of address, name/address
pairs, or other aliases enclosed by ().
The parsing implementation in git-send-email is not as strict, but it
makes sense to ensure the test data used is. Although the --dump-aliases
test does not make use of the address data, it is helpful to avoid
giving future developers the wrong impression of the file format.
Also add an alias which translates to multiple addresses using the ()
format.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .mailrc alias file format documents that multiple addresses are
separated by spaces. The alias file used in the t9001 --dump-aliases
mailrc test have addresses which include both a name and email. These
are unquoted, so git send-email will parse this as an alias that
translates to multiple independent addresses.
The existing test does not care about this, as --dump-aliases only dumps
the alias and not the address. However, it is incorrect for a future
where --dump-aliases could also dump the mail addresses.
Fix the test to quote the aliases properly, so that they translate to a
single address.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Address-looking strings found on the trailer are now placed on the
Cc: list after running through sanitize_address by "git send-email".
* cb/send-email-sanitize-trailer-addresses:
git-send-email: use sanitized address when reading mbox body
|
|
Addresses that are mentioned on the trailers in the commit log
messages (e.g., "Reviewed-by") are added to the "Cc:" list by "git
send-email". These hand-written addresses, however, may be
malformed (e.g., having unquoted "." and other punctutation marks in
the display-name part) and can upset MTA.
The code does use the sanitize_address() helper on these
address-looking strings to turn them into valid addresses, but it is
used only to see if the address should be suppressed. The original
string taken from the message is added to the @cc list if the code
decides the address is not suppressed.
Because the addresses on trailer lines are hand-written and more
likely to contain malformed addresses, when adding to the @cc list,
use the result from sanitize_address, not the original. Note that
we do not modify the behaviour for addresses taken from the e-mail
headers, as they are more likely to be machine generated and
well-formed.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'i' flag for the 's' command of sed is not specified by POSIX so
it is not portable. Replace its usage by different and portable
syntax.
Signed-off-by: Marcel Telka <marcel@telka.sk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step to deprecate test_i18ngrep.
* jc/test-i18ngrep:
tests: teach callers of test_i18ngrep to use test_grep
test framework: further deprecate test_i18ngrep
|
|
"git send-email" did not have certain pieces of data computed yet
when it tried to validate the outging messages and its recipient
addresses, which has been sorted out.
* ms/send-email-validate-fix:
send-email: move validation code below process_address_list
|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The codepath to handle recipient addresses `git send-email
--compose` learns from the user was completely broken, which has
been corrected.
* jk/send-email-fix-addresses-from-composed-messages:
send-email: handle to/cc/bcc from --compose message
Revert "send-email: extract email-parsing code into a subroutine"
doc/send-email: mention handling of "reply-to" with --compose
|
|
Move validation logic below processing of email address lists so that
email validation gets the proper email addresses. As a side effect,
some initialization needed to be moved down. In order for validation
and the actual email sending to have the same initial state, the
initialized variables that get modified by pre_process_file are
encapsulated in a new function.
This fixes email address validation errors when the optional
perl module Email::Valid is installed and multiple addresses are passed
in on a single to/cc argument like --to=foo@example.com,bar@example.com.
A new test was added to t9001 to expose failures with this case in the
future.
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Michael Strawbridge <michael.strawbridge@amd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user writes a message via --compose, send-email will pick up
various headers like "From", "Subject", etc and use them for other
patches as if they were specified on the command-line. But we don't
handle "To", "Cc", or "Bcc" this way; we just tell the user "those
aren't interpeted yet" and ignore them.
But it seems like an obvious thing to want, especially as the same
feature exists when the cover letter is generated separately by
format-patch. There it is gated behind the --to-cover option, but I
don't think we'd need the same control here; since we generate the
--compose template ourselves based on the existing input, if the user
leaves the lines unchanged then the behavior remains the same.
So let's fill in the implementation; like those other headers we already
handle, we just need to assign to the initial_* variables. The only
difference in this case is that they are arrays, so we'll feed them
through parse_address_line() to split them (just like we would when
reading a single string via prompting).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit b6049542b97e7b135e0e82bf996084d461224d32.
Prior to that commit, we read the results of the user editing the
"--compose" message in a loop, picking out parts we cared about, and
streaming the result out to a ".final" file. That commit split the
reading/interpreting into two phases; we'd now read into a hash, and
then pick things out of the hash.
The goal was making the code more readable. And in some ways it did,
because the ugly regexes are confined to the reading phase. But it also
introduced several bugs, because now the two phases need to match each
other. In particular:
- we pick out headers like "Subject: foo" with a case-insensitive
regex, and then use the user-provided header name as the key in a
case-sensitive hash. So if the user wrote "subject: foo", we'd no
longer recognize it as a subject.
- the namespace for the hash keys conflates header names with meta
information like "body". If you put "body: foo" in your message, it
would be misinterpreted as the actual message body (nobody is likely
to do that in practice, but it seems like an unnecessary danger).
- the handling for to/cc/bcc is totally broken. The behavior before
that commit is to recognize and skip those headers, with a note to
the user that they are not yet handled. Not great, but OK. But
after the patch, the reading side now splits the addresses into a
perl array-ref. But the interpreting side doesn't handle this at
all, and blindly prints the stringified array-ref value. This leads
to garbage like:
(mbox) Adding to: ARRAY (0x555b4345c428) from line 'To: ARRAY(0x555b4345c428)'
error: unable to extract a valid address from: ARRAY (0x555b4345c428)
What to do with this address? ([q]uit|[d]rop|[e]dit):
Probably not a huge deal, since nobody should even try to use those
headers in the first place (since they were not implemented). But
the new behavior is worse, and indicative of the sorts of problems
that come from having the two layers.
The revert had a few conflicts, due to later work in this area from
15dc3b9161 (send-email: rename variable for clarity, 2018-03-04) and
d11c943c78 (send-email: support separate Reply-To address, 2018-03-04).
I've ported the changes from those commits over as part of the conflict
resolution.
The new tests show the bugs. Note the use of GIT_SEND_EMAIL_NOTTY in the
second one. Without it, the test is happy to reach outside the test
harness to the developer's actual terminal (when run with the buggy
state before this patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test style fix.
* ob/t9001-indent-fix:
t9001: fix indentation in test_no_confirm()
|
|
Test fix.
* jc/send-email-pre-process-fix:
t9001: remove excessive GIT_SEND_EMAIL_NOTTY=1
|
|
Adjust to newer Term::ReadLine to prevent it from breaking
the interactive prompt code in send-email.
* jk/send-email-with-new-readline:
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
The continuations of the compound command were indented as if they were
continuations of the embedded pipe, which was misleading.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was added by 3ece9bf0f9 (send-email: clear the $message_id after
validation, 2023-05-17) for no apparent reason, as this is required only
in cases when git's stdin is (must be) redirected, which isn't the case
here.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every time git-send-email calls its ask() function to prompt the user,
we call term(), which instantiates a new Term::ReadLine object. But in
v1.46 of Term::ReadLine::Gnu (which provides the Term::ReadLine
interface on some platforms), its constructor refuses to create a second
instance[1]. So on systems with that version of the module, most
git-send-email instances will fail (as we usually prompt for both "to"
and "in-reply-to" unless the user provided them on the command line).
We can fix this by keeping a single instance variable and returning it
for each call to term(). In perl 5.10 and up, we could do that with a
"state" variable. But since we only require 5.008, we'll do it the
old-fashioned way, with a lexical "my" in its own scope.
Note that the tests in t9001 detect this problem as-is, since the
failure mode is for the program to die. But let's also beef up the
"Prompting works" test to check that it correctly handles multiple
inputs (if we had chosen to keep our FakeTerm hack in the previous
commit, then the failure mode would be incorrectly ignoring prompts
after the first).
[1] For discussion of why multiple instances are forbidden, see:
https://github.com/hirooih/perl-trg/issues/16
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* jk/format-patch-message-id-unleak:
format-patch: free elements of rev.ref_message_ids list
format-patch: free rev.message_id when exiting
|
|
When "git send-email" that uses the validate hook is fed a message
without and then with Message-ID, it failed to auto-assign a unique
Message-ID to the former and instead reused the Message-ID from the
latter, which has been corrected. This was a fix for a recent
regression caught before the release, so no need to mention it in
the release notes.
* jc/send-email-pre-process-fix:
t9001: mark the script as no longer leak checker clean
send-email: clear the $message_id after validation
|
|
We may allocate a message-id string via gen_message_id(), but we never
free it, causing a small leak. This can be demonstrated by running t9001
with a leak-checking build. The offending test is the one touched by
3ece9bf0f9 (send-email: clear the $message_id after validation,
2023-05-17), but the leak is much older than that. The test was simply
unlucky enough to trigger the leaking code path for the first time.
We can fix this by freeing the string at the end of the function. We can
also re-mark the test script as leak-free, effectively reverting
20bd08aefb (t9001: mark the script as no longer leak checker clean,
2023-05-17).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test uses "format-patch --thread" which is known to leak the
generated message ID list.
Plugging these leaks involves straightening out the memory ownership
rules around rev_info.message_id and rev_info.ref_message_ids, and
is beyond the scope of send-email fix, so for now mark the test as
leaky to unblock the topic before the release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently git-send-email started parsing the same message twice, once
to validate _all_ the message before sending even the first one, and
then after the validation hook is happy and each message gets sent,
to read the contents to find out where to send to etc.
Unfortunately, the effect of reading the messages for validation
lingered even after the validation is done. Namely $message_id gets
assigned if exists in the input files but the variable is global,
and it is not cleared before pre_process_file runs. This causes
reading a message without a message-id followed by reading a message
with a message-id to misbehave---the sub reports as if the message
had the same id as the previously written one.
Clear the variable before starting to read the headers in
pre_process_file.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" learned "--header-cmd=<cmd>" that can inject
arbitrary e-mail header lines to the outgoing messages.
* mc/send-email-header-cmd:
send-email: detect empty blank lines in command output
send-email: add --header-cmd, --no-header-cmd options
send-email: extract execute_cmd from recipients_cmd
|
|
"git send-email" learned to give the e-mail headers to the validate
hook by passing an extra argument from the command line.
* ms/send-email-feed-header-to-validate-hook:
send-email: expose header information to git-send-email's sendemail-validate hook
send-email: refactor header generation functions
|
|
The email format does not allow blank lines in headers; detect such
input and report it as malformed and add a test for it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes, adding a header different than CC or TO is desirable; for
example, when using Debbugs, it is best to use 'X-Debbugs-Cc' headers
to keep people in CC; this is an example use case enabled by the new
'--header-cmd' option.
The header unfolding logic is extracted to a subroutine so that it can
be reused; a test is added for coverage.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hook
To allow further flexibility in the Git hook, the SMTP header
information of the email which git-send-email intends to send, is now
passed as the 2nd argument to the sendemail-validate hook.
As an example, this can be useful for acting upon keywords in the
subject or specific email addresses.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Michael Strawbridge <michael.strawbridge@amd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When sending patch series (with a cover-letter or not)
sendemail-validate is called with every email/patch file independently
from the others. When one of the patches depends on a previous one, it
may not be possible to use this hook in a meaningful way. A hook that
wants to check some property of the whole series needs to know which
patch is the final one.
Expose the current and total number of patches to the hook via the
GIT_SENDEMAIL_PATCH_COUNTER and GIT_SENDEMAIL_PATCH_TOTAL environment
variables so that both incremental and global validation is possible.
Sharing any other state between successive invocations of the validate
hook must be done via external means. For example, by storing it in
a git config sendemail.validateWorktree entry.
Add a sample script with placeholder validations and update tests to
check that the counters are properly exported.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consistently spell "Message-ID" as such, not "Message-Id".
* jc/spell-id-in-both-caps-in-message-id:
e-mail workflow: Message-ID is spelled with ID in both capital letters
|
|
We used to write "Message-Id:" and "Message-ID:" pretty much
interchangeably, and the header name is defined to be case
insensitive by the RFCs, but the canonical form "Message-ID:" is
used throughout the RFC documents, so let's imitate it ourselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
|
|
send-email relays unrecognized arguments to its format-patch call.
Passing '-v N' leads to an error because -v is consumed as
send-email's --validate. For example,
git send-email -v 3 @{u}
fails with
fatal: ambiguous argument '3': unknown revision or path not in the
working tree. [...]
To prevent this, add the short --reroll-count option to send-email's
main option list and explicitly provide it to the format-patch call.
There other format-patch options that send-email doesn't relay
properly, including at least -n, -N, and the diff option -D. Punt on
these because dealing with them is more complicated:
* they would require configuring send-email to not ignore option case
* send-email makes three GetOptions() calls with different sets of
options, the last being the main set of options. Unlike -v, which
is consumed by the last GetOptions call, the -n, -N, and -D options
are consumed as abbreviations by the earlier calls.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Despite POSIX states that:
> The old egrep and fgrep commands are likely to be supported for many
> years to come as implementation extensions, allowing historical
> applications to operate unmodified.
GNU grep 3.8 started to warn[1]:
> The egrep and fgrep commands, which have been deprecated since
> release 2.5.3 (2007), now warn that they are obsolescent and should
> be replaced by grep -E and grep -F.
Prepare for their removal in the future.
[1]: https://lists.gnu.org/archive/html/info-gnu/2022-09/msg00001.html
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
|
|
Clear the "boundary_commits" object_array in release_revisions(). This
makes a few more tests pass under SANITIZE=leak, including
"t/t4126-apply-empty.sh" which started failed as an UNLEAK() in
cmd_format_patch() was removed in a preceding commit.
This also re-marks the various tests relying on "git format-patch" as
passing under "SANITIZE=leak", in the preceding "revisions API users:
use release_revisions() in builtin/log.c" commit those were marked as
failing as we removed the UNLEAK(rev) from cmd_format_patch() in
"builtin/log.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change tests that used a "mkdir -p .git/hooks && write_script" pattern
to use the new "test_hook" helper instead. The new helper does not
create the .git/hooks directory, rather we assume that the default
template will do so for us.
An upcoming series[1] will extend "test_hook" to operate in a
"--template=" mode, but for now assuming that we have a .git/hooks
already is a safe assumption. If that assumption becomes false in the
future we'll only need to change 'test_hook", instead of all of these
callsites.
1. https://lore.kernel.org/git/cover-00.13-00000000000-20211212T201308Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "sendmail-validate" hook to be run via the "git hook run"
wrapper instead of via a direct invocation.
This is the smallest possibly change to get "send-email" using "git
hook run". We still check the hook itself with "-x", and set a
"GIT_DIR" variable, both of which are asserted by our tests. We'll
need to get rid of this special behavior if we start running N hooks,
but for now let's be as close to bug-for-bug compatible as possible.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ab/send-email-config-fix:
send-email: fix a "first config key wins" regression in v2.33.0
|
|
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
|
|
Test fix.
* ga/send-email-sendmail-cmd:
t9001: PATH must not use Windows-style paths
|
