| Age | Commit message (Collapse) | Author |
|---|
|
While discovering a ".git" directory, the code treats any stat()
failure as a sign that a filesystem entity .git does not exist
there, and ignores ".git" that is not a "gitdir" file or a
directory. The code has been tightened to notice and report
filesystem corruption better.
* ty/setup-error-tightening:
setup: improve error diagnosis for invalid .git files
|
|
Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
|
|
'read_gitfile_gently()' treats any non-regular file as
'READ_GITFILE_ERR_NOT_A_FILE' and fails to discern between 'ENOENT'
and other stat failures. This flawed error reporting is noted by two
'NEEDSWORK' comments.
Address these comments by introducing two new error codes:
'READ_GITFILE_ERR_MISSING'(which groups the "file missing" scenarios
together) and 'READ_GITFILE_ERR_IS_A_DIR':
1. Update 'read_gitfile_error_die()' to treat 'IS_A_DIR', 'MISSING',
'NOT_A_FILE' and 'STAT_FAILED' as non-fatal no-ops. This accommodates
intentional non-repo scenarios (e.g., GIT_DIR=/dev/null).
2. Explicitly catch 'NOT_A_FILE' and 'STAT_FAILED' during
discovery and call 'die()' if 'die_on_error' is set.
3. Unconditionally pass '&error_code' to 'read_gitfile_gently()'.
4. Only invoke 'is_git_directory()' when we explicitly receive
'READ_GITFILE_ERR_IS_A_DIR', avoiding redundant checks.
Additionally, audit external callers of 'read_gitfile_gently()' in
'submodule.c' and 'worktree.c' to accommodate the refined error codes.
Signed-off-by: Tian Yuchen <a3205153416@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git allows setting a different object directory via
'GIT_OBJECT_DIRECTORY', but provides no equivalent for references. In
the previous commit we extended the 'extensions.refStorage' config to
also support an URI input for reference backend with location.
Let's also add a new environment variable 'GIT_REFERENCE_BACKEND' that
takes in the same input as the config variable. Having an environment
variable allows us to modify the reference backend and location on the
fly for individual Git commands.
The environment variable also allows usage of alternate reference
directories during 'git-clone(1)' and 'git-init(1)'. Add the config to
the repository when created with the environment variable set.
When initializing the repository with an alternate reference folder,
create the required stubs in the repositories $GIT_DIR. The inverse,
i.e. removal of the ref store doesn't clean up the stubs in the $GIT_DIR
since that would render it unusable. Removal of ref store is only used
when migrating between ref formats and cleanup of the $GIT_DIR doesn't
make sense in such a situation.
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'extensions.refStorage' config is used to specify the reference
backend for a given repository. Both the 'files' and 'reftable' backends
utilize the $GIT_DIR as the reference folder by default in
`get_main_ref_store()`.
Since the reference backends are pluggable, this means that they could
work with out-of-tree reference directories too. Extend the 'refStorage'
config to also support taking an URI input, where users can specify the
reference backend and the location.
Add the required changes to obtain and propagate this value to the
individual backends. Add the necessary documentation and tests.
Traditionally, for linked worktrees, references were stored in the
'$GIT_DIR/worktrees/<wt_id>' path. But when using an alternate reference
storage path, it doesn't make sense to store the main worktree
references in the new path, and the linked worktree references in the
$GIT_DIR. So, let's store linked worktree references in
'$ALTERNATE_REFERENCE_DIR/worktrees/<wt_id>'. To do this, create the
necessary files and folders while also adding stubs in the $GIT_DIR path
to ensure that it is still considered a Git directory.
Ideally, we would want to pass in a `struct worktree *` to individual
backends, instead of passing the `gitdir`. This allows them to handle
worktree specific logic. Currently, that is not possible since the
worktree code is:
- Tied to using the global `the_repository` variable.
- Is not setup before the reference database during initialization of
the repository.
Add a TODO in 'refs.c' to ensure we can eventually make that change.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `create_reference_database()` function is used to create the
reference database during initialization of a repository. The function
calls `repo_set_ref_storage_format()` to set the repositories reference
format. This is an unexpected side-effect of the function. More so
because the function is only called in two locations:
1. During git-init(1) where the value is propagated from the `struct
repository_format repo_fmt` value.
2. During git-clone(1) where the value is propagated from the
`the_repository` value.
The former is valid, however the flow already calls
`repo_set_ref_storage_format()`, so this effort is simply duplicated.
The latter sets the existing value in `the_repository` back to itself.
While this is okay for now, introduction of more fields in
`repo_set_ref_storage_format()` would cause issues, especially
dynamically allocated strings, where we would free/allocate the same
string back into `the_repostiory`.
To avoid all this confusion, clean up the function to no longer take in
and set the repo's reference storage format.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clean up redundant includes of header files.
* rs/clean-includes:
remove duplicate includes
|
|
The following command reports that some header files are included twice:
$ git grep '#include' '*.c' | sort | uniq -cd
Remove the second #include line in each case, as it has no effect.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid local submodule repository directory paths overlapping with
each other by encoding submodule names before using them as path
components.
* ar/submodule-gitdir-tweak:
submodule: detect conflicts with existing gitdir configs
submodule: hash the submodule name for the gitdir path
submodule: fix case-folding gitdir filesystem collisions
submodule--helper: fix filesystem collisions by encoding gitdir paths
builtin/credential-store: move is_rfc3986_unreserved to url.[ch]
submodule--helper: add gitdir migration command
submodule: allow runtime enabling extensions.submodulePathConfig
submodule: introduce extensions.submodulePathConfig
builtin/submodule--helper: add gitdir command
submodule: always validate gitdirs inside submodule_name_to_gitdir
submodule--helper: use submodule_name_to_gitdir in add_submodule
|
|
Add a new config `init.defaultSubmodulePathConfig` which allows
enabling `extensions.submodulePathConfig` for new submodules by
default (those created via git init or clone).
Important: setting init.defaultSubmodulePathConfig = true does
not globally enable `extensions.submodulePathConfig`. Existing
repositories will still have the extension disabled and will
require migration (for example via git submodule--helper command
added in the next commit).
Suggested-by: Patrick Steinhardt <ps@pks.im>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea of this extension is to abstract away the submodule gitdir
path implementation: everyone is expected to use the config and not
worry about how the path is computed internally, either in git or
other implementations.
With this extension enabled, the submodule.<name>.gitdir repo config
becomes the single source of truth for all submodule gitdir paths.
The submodule.<name>.gitdir config is added automatically for all new
submodules when this extension is enabled.
Git will throw an error if the extension is enabled and a config is
missing, advising users how to migrate. Migration is manual for now.
E.g. to add a missing config entry for an existing "foo" module:
git config submodule.foo.gitdir .git/modules/foo
Suggested-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In Git for Windows, `has_symlinks` is set to 0 by default. Therefore, we
need to parse the config setting `core.symlinks` to know if it has been
set to `true`. In `git init`, we must do that before copying the
templates because they might contain symbolic links.
Even if the support for symbolic links on Windows has not made it to
upstream Git yet, we really should make sure that all the `core.*`
settings are parsed before proceeding, as they might very well change
the behavior of `git init` in a way the user intended.
This fixes https://github.com/git-for-windows/git/issues/3414
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code refactoring around object database sources.
* ps/object-source-management:
odb: handle recreation of quarantine directories
odb: handle changing a repository's commondir
chdir-notify: add function to unregister listeners
odb: handle initialization of sources in `odb_new()`
http-push: stop setting up `the_repository` for each reference
t/helper: stop setting up `the_repository` repeatedly
builtin/index-pack: fix deferred fsck outside repos
oidset: introduce `oidset_equal()`
odb: move logic to disable ref updates into repo
odb: refactor `odb_clear()` to `odb_free()`
odb: adopt logic to close object databases
setup: convert `set_git_dir()` to have file scope
path: move `enter_repo()` into "setup.c"
|
|
"git config get --path" segfaulted on an ":(optional)path" that
does not exist, which has been corrected.
* jc/optional-path:
config: really treat missing optional path as not configured
config: really pretend missing :(optional) value is not there
config: mark otherwise unused function as file-scope static
|
|
In the preceding commit we have moved the logic that reparents object
database sources on chdir(3p) from "setup.c" into "odb.c". Let's also do
the same for any temporary quarantine directories so that the complete
reparenting logic is self-contained in "odb.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `repo_set_gitdir()` is called in two situations:
- To initialize the repository with its discovered location. As part
of this we also set up the new object database.
- To update the repository's discovered location in case the process
changes its working directory so that we update relative paths. This
means we also have to update any relative paths that are potentially
used in the object database.
In the context of the object database we ideally wouldn't ever have to
worry about the second case: if all paths used by our object database
sources were absolute, then we wouldn't have to update them. But
unfortunately, the paths aren't only used to locate files owned by the
given source, but we also use them for reporting purposes. One such
example is `repo_get_object_directory()`, where we cannot just change
semantics to always return absolute paths, as that is likely to break
tooling out there.
One solution to this would be to have both a "display path" and an
"internal path". This would allow us to use internal paths for all
internal matters, but continue to use the potentially-relative display
paths so that we don't break compatibility. But converting the codebase
to honor this split is quite a messy endeavour, and it wouldn't even
help us with the goal to get rid of the need to update the display path
on chdir(3p).
Another solution would be to rework "setup.c" so that we never have to
update paths in the first place. In that case, we'd only initialize the
repository once we have figured out final locations for all directories.
This would be a significant simplification of that subsystem indeed, but
the current logic is so messy that it would take significant investments
to get there.
Meanwhile though, while object sources may still use relative paths, the
best thing we can do is to handle the reparenting of the object source
paths in the object database itself. This can be done by registering one
callback for each object database so that we get notified whenever the
current working directory changes, and we then perform the reparenting
ourselves.
Ideally, this wouldn't even happen on the object database level, but
instead handled by each object database source. But we don't yet have
proper pluggable object database sources, so this will need to be
handled at a later point in time.
The logic itself is rather simple:
- We register the callback when creating the object database.
- We unregister the callback when releasing it again.
- We split up `set_git_dir_1()` so that it becomes possible to skip
recreating the object database. This is required because the
function is called both when the current working directory changes,
but also when we set up the repository. Calling this function
without skipping creation of the ODB will result in a bug in case
it's already created.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our object database sources have a field `disable_ref_updates`. This
field can obviously be set to disable reference updates, but it is
somewhat curious that this logic is hosted by the object database.
The reason for this is that it was primarily added to keep us from
accidentally updating references while an ODB transaction is ongoing.
Any objects part of the transaction have not yet been committed to disk,
so new references that point to them might get corrupted in case we
never end up committing the transaction. As such, whenever we create a
new transaction we set up a new temporary ODB source and mark it as
disabling reference updates.
This has one (and only one?) upside: once we have committed the
transaction, the temporary source will be dropped and thus we clean up
the disabled reference updates automatically. But other than that, it's
somewhat misdesigned:
- We can have multiple ODB sources, but only the currently active
source inhibits reference updates.
- We're mixing concerns of the refdb with the ODB.
Arguably, the decision of whether we can update references or not should
be handled by the refdb. But that wouldn't be a great fit either, as
there can be one refdb per worktree. So we'd again have the same problem
that a "global" intent becomes localized to a specific instance.
Instead, move the setting into the repository. While at it, convert it
into a boolean.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These callers expect that git_config_pathname() that returns 0 is a
signal that the variable they passed has a string they need to act
on. But with the introduction of ":(optional)path" earlier, that is
no longer the case. If the path specified by the configuration
variable is missing, their variable will get a NULL in it, and they
need to act on it (often, just refraining from copying it elsewhere).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't have any external callers of `set_git_dir()` anymore now that
`enter_repo()` has been moved into "setup.c". Remove the declaration and
mark the function as static.
Note that this change requires us to move the implementation around so
that we can avoid adding any new forward declarations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `enter_repo()` is used to enter a repository at a given
path. As such it sits way closer to setting up a repository than it does
with handling paths, but regardless of that it's located in "path.c"
instead of in "setup.c".
Move the function into "setup.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
string_list_split*() family of functions have been extended to
simplify common use cases.
* jc/string-list-split:
string-list: split-then-remove-empty can be done while splitting
string-list: optionally omit empty string pieces in string_list_split*()
diff: simplify parsing of diff.colormovedws
string-list: optionally trim string pieces split by string_list_split*()
string-list: unify string_list_split* functions
string-list: align string_list_split() with its _in_place() counterpart
string-list: report programming error with BUG
|
|
The string_list_split_in_place() function was updated by 52acddf3
(string-list: multi-delimiter `string_list_split_in_place()`,
2023-04-24) to take more than one delimiter characters, hoping that
we can later use it to replace our uses of strtok(). We however did
not make a matching change to the string_list_split() function,
which is very similar.
Before giving both functions more features in future commits, allow
string_list_split() to also take more than one delimiter characters
to make them closer to each other.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set()`. All
callsites are adjusted so that they use `repo_config_set(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_gently()`.
All callsites are adjusted so that they use
`repo_config_set_gently(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_clear()`. All
callsites are adjusted so that they use
`repo_config_clear(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare to flip the default hash function to SHA-256.
* bc/use-sha256-by-default-in-3.0:
Enable SHA-256 by default in breaking changes mode
help: add a build option for default hash
t5300: choose the built-in hash outside of a repo
t4042: choose the built-in hash outside of a repo
t1007: choose the built-in hash outside of a repo
t: default to compile-time default hash if not set
setup: use the default algorithm to initialize repo format
Use legacy hash for legacy formats
builtin: use default hash when outside a repository
hash: add a constant for the legacy hash algorithm
hash: add a constant for the default hash algorithm
|
|
* bc/use-sha256-by-default-in-3.0:
Enable SHA-256 by default in breaking changes mode
help: add a build option for default hash
t5300: choose the built-in hash outside of a repo
t4042: choose the built-in hash outside of a repo
t1007: choose the built-in hash outside of a repo
t: default to compile-time default hash if not set
setup: use the default algorithm to initialize repo format
Use legacy hash for legacy formats
builtin: use default hash when outside a repository
hash: add a constant for the legacy hash algorithm
hash: add a constant for the default hash algorithm
|
|
The reftable ref backend has matured enough; Git 3.0 will make it
the default format in a newly created repositories by default.
* ps/use-reftable-as-default-in-3.0:
setup: use "reftable" format when experimental features are enabled
BreakingChanges: announce switch to "reftable" format
|
|
The 'extensions.preciousObjects' setting when set true, prevents
operations that might drop objects from the object storage. This setting
is populated in the global variable
'repository_format_precious_objects'.
Move this global variable to repo scope by adding it to 'struct
repository and also refactor all the occurences accordingly.
This change is part of an ongoing effort to eliminate global variables,
improve modularity and help libify the codebase.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the preceding commit we have announced the switch to the "reftable"
format in Git 3.0 for newly created repositories. The format is being
battle tested by GitLab and a couple of other developers, and except for
a small handful of issues exposed early after it has been merged it has
been rock solid. Regardless of that though the test user base is still
comparatively small, which increases the risk that we miss critical
bugs.
Address this by enabling the reftable format when experimental features
are enabled. This should increase the test user base by some margin and
thus give us more input before making the format the default.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "reftable" format has come a long way and has matured nicely since
it has been merged into git via 57db2a094d5 (refs: introduce reftable
backend, 2024-02-07). It fixes longstanding issues that cannot be fixed
with the "files" format in a backwards-compatible way and performs
significantly better in many use cases.
Announce that we will switch to the "reftable" format in Git 3.0 for
newly created repositories and wire up the change, hidden behind the
WITH_BREAKING_CHANGES preprocessor define.
This switch is dependent on support in the larger Git ecosystem. Most
importantly, libraries like JGit, libgit2 and Gitoxide should support
the reftable backend so that we don't break all applications and tools
built on top of those libraries.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we define a new repository format with REPOSITORY_FORMAT_INIT, we
always use GIT_HASH_SHA1, and this value ends up getting used as the
default value to initialize a repository if none of the command line,
environment, or config tell us to do otherwise.
Because we might not always want to use SHA-1 as the default, let's
instead specify the default hash algorithm constant so that we will use
whatever the specified default is.
However, we also need to continue to read older repositories. If we're
in a v0 repository or extensions.objectformat is not set, then we must
continue to default to the original hash algorithm: SHA-1. If an
algorithm is set explicitly, however, it will override the hash_algo
member of the repository_format struct and we'll get the right value.
Similarly, if the repository was initialized before Git 0.99.3, then it
may lack a core.repositoryformatversion key, and some repositories lack
a config file altogether. In both cases, format->version is -1 and we
need to assume that SHA-1 is in use.
Because clear_repository_format reinitializes the struct
repository_format and therefore sets the hash_algo member to the default
(which could in the future not be SHA-1), we need to reset this member
explicitly. We know, however, that at the point we call
read_repository_format, we are actually reading an existing repository
and not initializing a new one or operating outside of a repository, so
we are not changing the default behavior back to SHA-1 if the default
algorithm is different.
It is potentially questionable that we ignore all repository
configuration if there is a config file but it doesn't have
core.repositoryformatversion set, in which case we reset all of the
configuration to the default. However, it is unclear what the right
thing to do instead with such an old repository is and a simple git init
will add the missing entry, so for now, we simply honor what the
existing code does and reset the value to the default, simply adding our
initialization to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a large variety of data formats and protocols where no hash
algorithm was defined and the default was assumed to always be SHA-1.
Instead of explicitly stating SHA-1, let's use the constant to represent
the legacy hash algorithm (which is still SHA-1) so that it's clear
for documentary purposes that it's a legacy fallback option and not an
intentional choice to use SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fallouts from recent renaming of documentation files from .txt
suffix to the new .adoc suffix have been corrected.
* tz/doc-txt-to-adoc-fixes: (38 commits)
xdiff: *.txt -> *.adoc fixes
unpack-trees.c: *.txt -> *.adoc fixes
transport.h: *.txt -> *.adoc fixes
trace2/tr2_sysenv.c: *.txt -> *.adoc fixes
trace2.h: *.txt -> *.adoc fixes
t6434: *.txt -> *.adoc fixes
t6012: *.txt -> *.adoc fixes
t/helper/test-rot13-filter.c: *.txt -> *.adoc fixes
simple-ipc.h: *.txt -> *.adoc fixes
setup.c: *.txt -> *.adoc fixes
refs.h: *.txt -> *.adoc fixes
pseudo-merge.h: *.txt -> *.adoc fixes
parse-options.h: *.txt -> *.adoc fixes
object-name.c: *.txt -> *.adoc fixes
list-objects-filter-options.h: *.txt -> *.adoc fixes
fsck.h: *.txt -> *.adoc fixes
diffcore.h: *.txt -> *.adoc fixes
diff.h: *.txt -> *.adoc fixes
contrib/long-running-filter: *.txt -> *.adoc fixes
config.c: *.txt -> *.adoc fixes
...
|
|
The path.[ch] API takes an explicit repository parameter passed
throughout the callchain, instead of relying on the_repository
singleton instance.
* ps/path-sans-the-repository:
path: adjust last remaining users of `the_repository`
environment: move access to "core.sharedRepository" into repo settings
environment: move access to "core.hooksPath" into repo settings
repo-settings: introduce function to clear struct
path: drop `git_path()` in favor of `repo_git_path()`
rerere: let `rerere_path()` write paths into a caller-provided buffer
path: drop `git_common_path()` in favor of `repo_common_path()`
worktree: return allocated string from `get_worktree_git_dir()`
path: drop `git_path_buf()` in favor of `repo_git_path_replace()`
path: drop `git_pathdup()` in favor of `repo_git_path()`
path: drop unused `strbuf_git_path()` function
path: refactor `repo_submodule_path()` family of functions
submodule: refactor `submodule_to_gitdir()` to accept a repo
path: refactor `repo_worktree_path()` family of functions
path: refactor `repo_git_path()` family of functions
path: refactor `repo_common_path()` family of functions
|
|
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the preceding refactorings we now only have a couple of implicit
users of `the_repository` left in the "path" subsystem, all of which
depend on global state via `calc_shared_perm()`. Make the dependency on
`the_repository` explicit by passing the repo as a parameter instead and
adjust callers accordingly.
Note that this change bubbles up into a couple of subsystems that were
previously declared as free from `the_repository`. Instead of marking
all of them as `the_repository`-dependent again, we instead use the
repository that is available in the calling context. There are three
exceptions though with "copy.c", "pack-write.c" and "tempfile.c".
Adjusting these would require us to adapt callsites all over the place,
so this is left for a future iteration.
Mark "path.c" as free from `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar as with the preceding commit, we track "core.sharedRepository"
via a pair of global variables. Move them into `struct repo_settings` so
that we can instead track them per-repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove `git_path_buf()` in favor of `repo_git_path_replace()`. The
latter does essentially the same, with the only exception that it does
not rely on `the_repository` but takes the repo as separate parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions provided by the "path" subsystem to derive repository
paths for the commondir, gitdir, worktrees and submodules are quite
inconsistent. Some functions have a `strbuf_` prefix, others have
different return values, some don't provide a variant working on top of
`strbuf`s.
We're thus about to refactor all of these family of functions so that
they follow a common pattern:
- `repo_*_path()` returns an allocated string.
- `repo_*_path_append()` appends the path to the caller-provided
buffer while returning a constant pointer to the buffer. This
clarifies whether the buffer is being appended to or rewritten,
which otherwise wasn't immediately obvious.
- `repo_*_path_replace()` replaces contents of the buffer with the
computed path, again returning a pointer to the buffer contents.
The returned constant pointer isn't being used anywhere yet, but it will
be used in subsequent commits. Its intent is to allow calling patterns
like the following somewhat contrived example:
if (!stat(&st, repo_common_path_replace(repo, &buf, ...)) &&
!unlink(repo_common_path_replace(repo, &buf, ...)))
...
Refactor the commondir family of functions accordingly and adapt all
callers.
Note that `repo_common_pathv()` is converted into an internal
implementation detail. It is only used to implement `the_repository`
compatibility shims and will eventually be removed from the public
interface.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The exact same issue as described in the preceding commit also exists
for GIT_DEFAULT_HASH. Thus, reinitializing a repository that e.g. uses
SHA1 with `GIT_DEFAULT_HASH=sha256 git init` will cause the object
format of that repository to change to SHA256. This is of course bogus
as any existing objects and refs will not be converted, thus causing
repository corruption:
$ git init repo
Initialized empty Git repository in /tmp/repo/.git/
$ cd repo/
$ git commit --allow-empty -m message
[main (root-commit) 35a7344] message
$ GIT_DEFAULT_HASH=sha256 git init
Reinitialized existing Git repository in /tmp/repo/.git/
$ git show
fatal: your current branch appears to be broken
Fix the issue by ignoring the environment variable in case the repo has
already been initialized with an object hash.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_DEFAULT_REF_FORMAT environment variable can be set to influence
the default ref format that new repostiories shall be initialized with.
While this is the expected behaviour when creating a new repository, it
is not when reinitializing a repository: we should retain the ref format
currently used by it in that case.
This doesn't work correctly right now:
$ git init --ref-format=files repo
Initialized empty Git repository in /tmp/repo/.git/
$ GIT_DEFAULT_REF_FORMAT=reftable git init repo
fatal: could not open '/tmp/repo/.git/refs/heads' for writing: Is a directory
Instead of retaining the current ref format, the reinitialization tries
to reinitialize the repository with the different format. This action
fails when git-init(1) tries to write the ".git/refs/heads" stub, which
in the context of the reftable backend is always written as a file so
that we can detect clients which inadvertently try to access the repo
with the wrong ref format. Seems like the protection mechanism works for
this case, as well.
Fix the issue by ignoring the environment variable in case the repo has
already been initialized with a ref storage format.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new extension, `relativeWorktrees`, is added to indicate that at least
one worktree in the repository has been linked with relative paths.
This ensures older Git versions do not attempt to automatically prune
worktrees with relative paths, as they would not not recognize the
paths as being valid.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reinitializing a repository, Git does not account for extensions
other than `objectformat` and `refstorage` when determining the
repository version. This can lead to a repository being downgraded to
version 0 if extensions are set, causing Git future operations to fail.
This patch teaches Git to check if other extensions are defined in the
config to ensure that the repository version is set correctly.
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git currently stores absolute paths to both the main repository and
linked worktrees. However, this causes problems when moving repositories
or working in containerized environments where absolute paths differ
between systems. The worktree links break, and users are required to
manually execute `worktree repair` to repair them, leading to workflow
disruptions. Additionally, mapping repositories inside of containerized
environments renders the repository unusable inside the containers, and
this is not repairable as repairing the worktrees inside the containers
will result in them being broken outside the containers.
To address this, this patch makes Git always write relative paths when
linking worktrees. Relative paths increase the resilience of the
worktree links across various systems and environments, particularly
when the worktrees are self-contained inside the main repository (such
as when using a bare repository with worktrees). This improves
portability, workflow efficiency, and reduces overall breakages.
Although Git now writes relative paths, existing repositories with
absolute paths are still supported. There are no breaking changes
to workflows based on absolute paths, ensuring backward compatibility.
At a low level, the changes involve modifying functions in `worktree.c`
and `builtin/worktree.c` to use `relative_path()` when writing the
worktree’s `.git` file and the main repository’s `gitdir` reference.
Instead of hardcoding absolute paths, Git now computes the relative path
between the worktree and the repository, ensuring that these links are
portable. Locations where these respective file are read have also been
updated to properly handle both absolute and relative paths. Generally,
relative paths are always resolved into absolute paths before any
operations or comparisons are performed.
Additionally, `repair_worktrees_after_gitdir_move()` has been introduced
to address the case where both the `<worktree>/.git` and
`<repo>/worktrees/<id>/gitdir` links are broken after the gitdir is
moved (such as during a re-initialization). This function repairs both
sides of the worktree link using the old gitdir path to reestablish the
correct paths after a move.
The `worktree.path` struct member has also been updated to always store
the absolute path of a worktree. This ensures that worktree consumers
never have to worry about trying to resolve the absolute path themselves.
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* ak/typofix-2.46-maint:
upload-pack: fix a typo
sideband: fix a typo
setup: fix a typo
run-command: fix a typo
revision: fix a typo
refs: fix typos
rebase: fix a typo
read-cache-ll: fix a typo
pretty: fix a typo
object-file: fix a typo
merge-ort: fix typos
merge-ll: fix a typo
http: fix a typo
gpg-interface: fix a typo
git-p4: fix typos
git-instaweb: fix a typo
fsmonitor-settings: fix a typo
diffcore-rename: fix typos
config.mak.dev: fix a typo
|
