| Age | Commit message (Collapse) | Author |
|---|
|
Users of the reftable library are expected to provide their own function
callback in cases they want to sync(3p) data to disk via the reftable
write options. But if no such function was provided we end up calling
fsync(3p) directly, which may not even be available on some systems.
While dropping the explicit call to fsync(3p) would work, it would lead
to an unsafe default behaviour where a project may have forgotten to set
up the callback function, and that could lead to potential data loss. So
this is not a great solution.
Instead, drop the callback function and make it mandatory for the
project to define fsync(3p). In the case of Git, we can then easily
inject our custom implementation via the "reftable-system.h" header so
that we continue to use `fsync_component()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code refactoring around refs-for-each-* API functions.
* ps/refs-for-each:
refs: replace `refs_for_each_fullref_in()`
refs: replace `refs_for_each_namespaced_ref()`
refs: replace `refs_for_each_glob_ref()`
refs: replace `refs_for_each_glob_ref_in()`
refs: replace `refs_for_each_rawref_in()`
refs: replace `refs_for_each_rawref()`
refs: replace `refs_for_each_ref_in()`
refs: improve verification for-each-ref options
refs: generalize `refs_for_each_fullref_in_prefixes()`
refs: generalize `refs_for_each_namespaced_ref()`
refs: speed up `refs_for_each_glob_ref_in()`
refs: introduce `refs_for_each_ref_ext`
refs: rename `each_ref_fn`
refs: rename `do_for_each_ref_flags`
refs: move `do_for_each_ref_flags` further up
refs: move `refs_head_ref_namespaced()`
refs: remove unused `refs_for_each_include_root_ref()`
|
|
Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
|
|
An upcoming commit will add support for providing an URI via the
'extensions.refStorage' config. The URI will contain the reference
backend and a corresponding payload. The payload can be then used for
providing an alternate locations for the reference backend.
To prepare for this, modify the existing backends to accept such an
argument when initializing via the 'init()' function. Both the files
and reftable backends will parse the information to be filesystem paths
to store references. Given that no callers pass any payload yet this is
essentially a no-op change for now.
To enable this, provide a 'refs_compute_filesystem_location()' function
which will parse the current 'gitdir' and the 'payload' to provide the
final reference directory and common reference directory (if working in
a linked worktree).
The documentation and tests will be added alongside the extension of the
config variable.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating the reftable reference backend on disk, we create stubs to
ensure that the directory can be recognized as a Git repository. This is
done by calling `refs_create_refdir_stubs()`. Move this to the generic
layer as this is needed for all backends excluding from the files
backends. In an upcoming commit where we introduce alternate reference
backend locations, we'll have to also create stubs in the $GIT_DIR
irrespective of the backend being used. This commit builds the base to
add that logic.
Similarly, move the logic for deletion of stubs to the generic layer.
The files backend recursively calls the remove function of the
'packed-backend', here skip calling the generic function since that
would try to delete stubs.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For Git to recognize a directory as a Git directory, it requires the
directory to contain:
1. 'HEAD' file
2. 'objects/' directory
3. 'refs/' directory
Here, #1 and #3 are part of the reference storage mechanism,
specifically the files backend. Since then, newer backends such as the
reftable backend have moved to using their own path ('reftable/') for
storing references. But to ensure Git still recognizes the directory as
a Git directory, we create stubs.
There are two locations where we create stubs:
- In 'refs/reftable-backend.c' when creating the reftable backend.
- In 'clone.c' before spawning transport helpers.
In a following commit, we'll add another instance. So instead of
repeating the code, let's extract out this code to
`refs_create_refdir_stubs()` and use it.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The enum `do_for_each_ref_flags` and its individual values don't match
to our current best practices when it comes to naming things. Rename it
to `refs_for_each_flag`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A handful of code paths that started using batched ref update API
(after Git 2.51 or so) lost detailed error output, which have been
corrected.
* kn/ref-batch-output-error-reporting-fix:
fetch: delay user information post committing of transaction
receive-pack: utilize rejected ref error details
fetch: utilize rejected ref error details
update-ref: utilize rejected error details if available
refs: add rejection detail to the callback function
refs: skip to next ref when current ref is rejected
|
|
In `refs_verify_refnames_available()` we have two nested loops: the
outer loop iterates over all references to check, while the inner loop
checks for filesystem conflicts for a given ref by breaking down its
path.
With batched updates, when we detect a filesystem conflict, we mark the
update as rejected and execute 'continue'. However, this only skips to
the next iteration of the inner loop, not the outer loop as intended.
This causes the same reference to be repeatedly rejected. Fix this by
using a goto statement to skip to the next reference in the outer loop.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a preceding commit we have extracted generic checks for both direct
and symbolic refs that apply for all backends. Wire up those checks for
the "reftable" backend.
Note that this is done by iterating through all refs manually with the
low-level reftable ref iterator. We explicitly don't want to use the
higher-level iterator that is exposed to users of the reftable backend
as that iterator may swallow for example broken refs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref consistency checks are driven via `cmd_refs_verify()`. That
function loops through all worktrees (including the main worktree) and
then checks the ref store for each of them individually. It follows that
the backend is expected to only verify refs that belong to the specified
worktree.
While the "files" backend handles this correctly, the "reftable" backend
doesn't. In fact, it completely ignores the passed worktree and instead
verifies refs of _all_ worktrees. The consequence is that we'll end up
every ref store N times, where N is the number of worktrees.
Or rather, that would be the case if we actually iterated through the
worktree reftable stacks correctly. But we use `strmap_for_each_entry()`
to iterate through the stacks, but the map is in fact not even properly
populated. So instead of checking stacks N^2 times, we actually only end
up checking the reftable stack of the main worktree.
Fix this bug by only verifying the stack of the passed-in worktree and
constructing the backends via `backend_for_worktree()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pull out the logic to retrieve a backend for a given worktree. This
function will be used in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adapt the includes to be sorted and to use include paths that are
relative to the "refs/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git maintenance" command learned "is-needed" subcommand to tell if
it is necessary to perform various maintenance tasks.
* kn/maintenance-is-needed:
maintenance: add 'is-needed' subcommand
maintenance: add checking logic in `pack_refs_condition()`
refs: add a `optimize_required` field to `struct ref_storage_be`
reftable/stack: add function to check if optimization is required
reftable/stack: return stack segments directly
|
|
Another fix-up to "peeled-tags" topic.
* ps/ref-peeled-tags-fixes:
object: fix performance regression when peeling tags
|
|
Code clean-up.
* kn/refs-optim-cleanup:
t/pack-refs-tests: move the 'test_done' to callees
refs: rename 'pack_refs_opts' to 'refs_optimize_opts'
refs: move to using the '.optimize' functions
|
|
Some ref backend storage can hold not just the object name of an
annotated tag, but the object name of the object the tag points at.
The code to handle this information has been streamlined.
* ps/ref-peeled-tags:
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
|
|
To allow users of the refs namespace to check if the reference backend
requires optimization, add a new field `optimize_required` field to
`struct ref_storage_be`. This field is of type `optimize_required_fn`
which is also introduced in this commit.
Modify the debug, files, packed and reftable backend to implement this
field. A following commit will expose this via 'git pack-refs' and 'git
refs optimize'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message fix.
* pk/reflog-migrate-message-fix:
refs: add missing space in messages
|
|
Our Bencher dashboards [1] have recently alerted us about a bunch of
performance regressions when writing references, specifically with the
reftable backend. There is a 3x regression when writing many refs with
preexisting refs in the reftable format, and a 10x regression when
migrating refs between backends in either of the formats.
Bisecting the issue lands us at 6ec4c0b45b (refs: don't store peeled
object IDs for invalid tags, 2025-10-23). The gist of the commit is that
we may end up storing peeled objects in both reftables and packed-refs
for corrupted tags, where the claimed tagged object type is different
than the actual tagged object type. This will then cause us to create
the `struct object *` with a wrong type, as well, and obviously nothing
good comes out of that.
The fix for this issue was to introduce a new flag to `peel_object()`
that causes us to verify the tagged object's type before writing it into
the refdb -- if the tag is corrupt, we skip writing the peeled value.
To verify whether the peeled value is correct we have to look up the
object type via the ODB and compare the actual type with the claimed
type, and that additional object lookup is costly.
This also explains why we see the regression only when writing refs with
the reftable backend, but we see the regression with both backends when
migrating refs:
- The reftable backend knows to store peeled values in the new table
immediately, so it has to try and peel each ref it's about to write
to the transaction. So the performance regression is visible for all
writes.
- The files backend only stores peeled values when writing the
packed-refs file, so it wouldn't hit the performance regression for
normal writes. But on ref migrations we know to write all new values
into the packed-refs file immediately, and that's why we see the
regression for both backends there.
Taking a step back though reveals an oddity in the new verification
logic: we not only verify the _tagged_ object's type, but we also verify
the type of the tag itself. But this isn't really needed, as we wouldn't
hit the bug in such a case anyway, as we only hit the issue with corrupt
tags claiming an invalid type for the tagged object.
The consequence of this is that we now started to look up the target
object of every single reference we're about to write, regardless of
whether it even is a tag or not. And that is of course quite costly.
Fix the issue by only verifying the type of the tagged objects. This
means that we of course still have a performance hit for actual tags.
But this only happens for writes anyway, and I'd claim it's preferable
to not store corrupted data in the refdb than to be fast here. Rename
the flag accordingly to clarify that we only verify the tagged object's
type.
This fix brings performance back to previous levels:
Benchmark 1: baseline
Time (mean ± σ): 46.0 ms ± 0.4 ms [User: 40.0 ms, System: 5.7 ms]
Range (min … max): 45.0 ms … 47.1 ms 54 runs
Benchmark 2: regression
Time (mean ± σ): 140.2 ms ± 1.3 ms [User: 77.5 ms, System: 60.5 ms]
Range (min … max): 138.0 ms … 142.7 ms 20 runs
Benchmark 3: fix
Time (mean ± σ): 46.2 ms ± 0.4 ms [User: 40.2 ms, System: 5.7 ms]
Range (min … max): 45.0 ms … 47.3 ms 55 runs
Summary
update-ref: baseline
1.00 ± 0.01 times faster than fix
3.05 ± 0.04 times faster than regression
[1]: https://bencher.dev/perf/git/plots
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit removed all references to 'pack_refs()' within
the refs subsystem. Continue this cleanup by also renaming
'pack_refs_opts' to 'refs_optimize_opts' and the respective flags
accordingly. Keeping the naming consistent will make the code easier to
maintain.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `struct ref_store` variable exposes two ways to optimize a reftable
backend:
1. pack_refs
2. optimize
The former was specific to the 'files' + 'packed' refs backend. The
latter is more generic and covers all backends. While the naming is
different, both of these functions perform the same functionality.
Consolidate this code to only maintain the 'optimize' functions. Do this
by modifying the backends so that they exclusively implement the
`optimize` callback, only. All users of the refs subsystem already use
the 'optimize' function so there is no changes needed on the callee
side. Finally, cleanup all references to the 'pack_refs' field of the
structure and code around it.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the "files" and "reftable" backend store peeled object IDs for
references that point to tags:
- The "files" backend stores the value when packing refs, where each
peeled object ID is prefixed with "^".
- The "reftable" backend stores the value whenever writing a new
reference that points to a tag via a special ref record type.
Both of these backends use `peel_object()` to find the peeled object ID.
But as explained in the preceding commit, that function does not detect
the case where the tag's tagged object and its claimed type mismatch.
The consequence of storing these bogus peeled object IDs is that we're
less likely to detect such corruption in other parts of Git.
git-for-each-ref(1) for example does not notice anymore that the tag is
broken when using "--format=%(*objectname)" to dereference tags.
One could claim that this is good, because it still allows us to mostly
use the tag as intended. But the biggest problem here is that we now
have different behaviour for such a broken tag depending on whether or
not we have its peeled value in the refdb.
Fix the issue by verifying the object type when peeling the object. If
that verification fails we simply skip storing the peeled value in
either of the reference formats.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When peeling a tag to a non-tag object we repeatedly call
`parse_object()` on the tagged object until we find the first object
that isn't a tag. While this feels sensible at first, there is a big
catch here: `parse_object()` doesn't actually verify the type of the
tagged object.
The relevant code path here eventually ends up in `parse_tag_buffer()`.
Here, we parse the various fields of the tag, including the "type". Once
we've figured out the type and the tagged object ID, we call one of the
`lookup_${type}()` functions for whatever type we have found. There is
two possible outcomes in the successful case:
1. The object is already part of our cached objects. In that case we
double-check whether the type we're trying to look up matches the
type that was cached.
2. The object is _not_ part of our cached objects. In that case, we
simply create a new object with the expected type, but we don't
parse that object.
In the first case we might notice type mismatches, but only in the case
where our cache has the object with the correct type. In the second
case, we'll blindly assume that the type is correct and then go with it.
We'll only notice that the type might be wrong when we try to parse the
object at a later point.
Now arguably, we could change `parse_tag_buffer()` to verify the tagged
object's type for us. But that would have the effect that such a tag
cannot be parsed at all anymore, and we have a small bunch of tests for
exactly this case that assert we still can open such tags. So this
change does not feel like something we can retroactively tighten, even
though one shouldn't ever hit such corrupted tags.
Instead, add a new `flags` field to `peel_object()` that allows the
caller to opt in to strict object verification. This will be wired up at
a subset of callsites over the next few commits.
Note that this change also inlines `deref_tag_noverify()`. There's only
been two callsites of that function, the one we're changing and one in
our test helpers. The latter callsite can trivially use `deref_tag()`
instead, so by inlining the function we avoid having to pass down the
flag.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the peeled object ID gets propagated via the `struct reference`
there is no need anymore to call into the reference iterator itself to
dereference an object. Remove this infrastructure.
Most of the changes are straight-forward deletions of code. There is one
exception though in `refs/packed-backend.c::write_with_updates()`. Here
we stop peeling the iterator and instead just pass the peeled object ID
of that iterator directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the "files" and "reftable" backend are able to store peeled values
for tags in the respective formats. This allows for a more efficient
lookup of the target object of such a tag without having to manually
peel via the object database.
The infrastructure to access these peeled object IDs is somewhat funky
though. When iterating through objects, we store a pointer reference to
the current iterator in a global variable. The callbacks invoked by that
iterator are then expected to call `peel_iterated_oid()`, which checks
whether the globally-stored iterator's current reference refers to the
one handed into that function. If so, we ask the iterator to peel the
object, otherwise we manually peel the object via the object database.
Depending on global state like this is somewhat weird and also quite
fragile.
Introduce a new `struct reference::peeled_oid` field that can be
populated by the reference backends. This field can be accessed via a
new function `reference_get_peeled_oid()` that either uses that value,
if set, or alternatively peels via the ODB. With this change we don't
have to rely on global state anymore, but make the peeled object ID
available to the callback functions directly.
Adjust trivial callers that already have a `struct reference` available.
Remaining callers will be adjusted in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the introduction of the `struct ref_iterator::ref` field it now is
a whole lot easier to introduce new fields that become accessible to the
caller without having to adapt every single callsite. But there's a
downside: when a new field is introduced we always have to adapt all
backends to set that field.
This isn't something we can avoid in the general case: when the new
field is expected to be populated by all backends we of course cannot
avoid doing so. But new fields may be entirely optional, in which case
we'd still have such churn. And furthermore, it is very easy right now
to leak state from a previous iteration into the next iteration.
Address this issue by ensuring that the reference backends all fully
reset the field on every single iteration. This ensures that no state
from previous iterations can leak into the next one. And it ensures that
any newly introduced fields will be zeroed out by default.
Note that we don't have to explicitly adapt the "files" backend, as it
uses the `cache_ref_iterator` internally. Furthermore, other "wrapping"
iterators like for example the `prefix_ref_iterator` copy around the
whole reference, so these don't need to be adapted either.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The base iterator has a couple of fields that tracks the name, target,
object ID and flags for the current reference. Due to this design we
have to create a new `struct reference` whenever we want to hand over
that reference to the callback function, which is tedious and not very
efficient.
Convert the structure to instead contain a `struct reference` as member.
This member is expected to be populated by the implementations of the
iterator and is handed over to the callback directly.
While at it, simplify `should_pack_ref()` to take a `struct reference`
directly instead of passing its respective fields.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git refs migrate" to migrate the reflog entries from a refs
backend to another had a handful of bugs squashed.
* ps/reflog-migrate-fixes:
refs: fix invalid old object IDs when migrating reflogs
refs: stop unsetting REF_HAVE_OLD for log-only updates
refs/files: detect race when generating reflog entry for HEAD
refs: fix identity for migrated reflogs
ident: fix type of string length parameter
builtin/reflog: implement subcommand to write new entries
refs: export `ref_transaction_update_reflog()`
builtin/reflog: improve grouping of subcommands
Documentation/git-reflog: convert to use synopsis type
|
|
The reftable backend learned to sanity check its on-disk data more
carefully.
* kn/reftable-consistency-checks:
refs/reftable: add fsck check for checking the table name
reftable: add code to facilitate consistency checks
fsck: order 'fsck_msg_type' alphabetically
Documentation/fsck-msgids: remove duplicate msg id
reftable: check for trailing newline in 'tables.list'
refs: move consistency check msg to generic layer
refs: remove unused headers
|
|
Add glue code in 'refs/reftable-backend.c' which calls the reftable
library to perform the fsck checks. Here we also map the reftable errors
to Git' fsck errors.
Introduce a check to validate table names for a given reftable stack.
Also add 'badReftableTableName' as a corresponding error within Git. The
reftable specification mentions:
It suggested to use
${min_update_index}-${max_update_index}-${random}.ref as a naming
convention.
So treat non-conformant file names as warnings.
While adding the fsck header to 'refs/reftable-backend.c', modify the
list to maintain lexicographical ordering.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the 'refs/' namespace, some of the included header files are not
needed, let's remove them.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git refs optimize" is added for not very well explained reason
despite it does the same thing as "git pack-refs"...
* ms/refs-optimize:
t: add test for git refs optimize subcommand
t0601: refactor tests to be shareable
builtin/refs: add optimize subcommand
doc: pack-refs: factor out common options
builtin/pack-refs: factor out core logic into a shared library
builtin/pack-refs: convert to use the generic refs_optimize() API
reftable-backend: implement 'optimize' action
files-backend: implement 'optimize' action
refs: add a generic 'optimize' API
|
|
To make the new generic `optimize` API fully functional, provide an
implementation for the 'reftable' reference backend.
For the reftable backend, the 'optimize' action is to compact its
tables. The existing `reftable_be_pack_refs()` function already provides
this logic, so the new `reftable_be_optimize()` function simply calls
it.
Wire up the new function to the `optimize` slot in the reftable
backend's virtual table.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Meet Soni <meetsoni3017@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" can clobber a symref that is dangling when the
remote-tracking HEAD is set to auto update, which has been
corrected.
* jk/no-clobber-dangling-symref-with-fetch:
refs: do not clobber dangling symrefs
t5510: prefer "git -C" to subshell for followRemoteHEAD tests
t5510: stop changing top-level working directory
t5510: make confusing config cleanup more explicit
|
|
Code clean-ups.
* ps/reftable-libgit2-cleanup:
refs/reftable: always reload stacks when creating lock
reftable: don't second-guess errors from flock interface
reftable/stack: handle outdated stacks when compacting
reftable/stack: allow passing flags to `reftable_stack_add()`
reftable/stack: fix compiler warning due to missing braces
reftable/stack: reorder code to avoid forward declarations
reftable/writer: drop Git-specific `QSORT()` macro
reftable/writer: fix type used for number of records
|
|
"git remote rename origin upstream" failed to move origin/HEAD to
upstream/HEAD when origin/HEAD is unborn and performed other
renames extremely inefficiently, which has been corrected.
* ps/remote-rename-fix:
builtin/remote: only iterate through refs that are to be renamed
builtin/remote: rework how remote refs get renamed
builtin/remote: determine whether refs need renaming early on
builtin/remote: fix sign comparison warnings
refs: simplify logic when migrating reflog entries
refs: pass refname when invoking reflog entry callback
|
|
"git refs migrate" to migrate the reflog entries from a refs
backend to another had a handful of bugs squashed.
* ps/reflog-migrate-fixes:
refs: fix invalid old object IDs when migrating reflogs
refs: stop unsetting REF_HAVE_OLD for log-only updates
refs/files: detect race when generating reflog entry for HEAD
refs: fix identity for migrated reflogs
ident: fix type of string length parameter
builtin/reflog: implement subcommand to write new entries
refs: export `ref_transaction_update_reflog()`
builtin/reflog: improve grouping of subcommands
Documentation/git-reflog: convert to use synopsis type
|
|
When given an expected "before" state, the ref-writing code will avoid
overwriting any ref that does not match that expected state. We use the
null oid as a sentinel value for "nothing should exist", and likewise
that is the sentinel value we get when trying to read a ref that does
not exist.
But there's one corner case where this is ambiguous: dangling symrefs.
Trying to read them will yield the null oid, but there is potentially
something of value there: the dangling symref itself.
For a normal recursive write, this is OK. Imagine we have a symref
"FOO_HEAD" that points to a ref "refs/heads/bar" that does not exist,
and we try to write to it with a create operation like:
oid=$(git rev-parse HEAD) ;# or whatever
git symbolic-ref FOO_HEAD refs/heads/bar
echo "create FOO_HEAD $oid" | git update-ref --stdin
The attempt to resolve FOO_HEAD will actually resolve "bar", yielding
the null oid. That matches our expectation, and the write proceeds. This
is correct, because we are not writing FOO_HEAD at all, but writing its
destination "bar", which in fact does not exist.
But what if the operation asked not to dereference symrefs? Like this:
echo "create FOO_HEAD $oid" | git update-ref --no-deref --stdin
Resolving FOO_HEAD would still result in a null oid, and the write will
proceed. But it will overwrite FOO_HEAD itself, removing the fact that
it ever pointed to "bar".
This case is a little esoteric; we are clobbering a symref with a
no-deref write of a regular ref value. But the same problem occurs when
writing symrefs. For example:
echo "symref-create FOO_HEAD refs/heads/other" |
git update-ref --no-deref --stdin
The "create" operation asked us to create FOO_HEAD only if it did not
exist. But we silently overwrite the existing value.
You can trigger this without using update-ref via the fetch
followRemoteHEAD code. In "create" mode, it should not overwrite an
existing value. But if you manually create a symref pointing to a value
that does not yet exist (either via symbolic-ref or with "remote add
-m"), create mode will happily overwrite it.
Instead, we should detect this case and refuse to write. The correct
specification to overwrite FOO_HEAD in this case is to provide an
expected target ref value, like:
echo "symref-update FOO_HEAD refs/heads/other ref refs/heads/bar" |
git update-ref --no-deref --stdin
Note that the non-symref "update" directive does not allow you to do
this (you can only specify an oid). This is a weakness in the update-ref
interface, and you'd have to overwrite unconditionally, like:
echo "update FOO_HEAD $oid" | git update-ref --no-deref --stdin
Likewise other symref operations like symref-delete do not accept the
"ref" keyword. You should be able to do:
echo "symref-delete FOO_HEAD ref refs/heads/bar"
but cannot (and can only delete unconditionally). This patch doesn't
address those gaps. We may want to do so in a future patch for
completeness, but it's not clear if anybody actually wants to perform
those operations. The symref update case (specifically, via
followRemoteHEAD) is what I ran into in the wild.
The code for the fix is relatively straight-forward given the discussion
above. But note that we have to implement it independently for the files
and reftable backends. The "old oid" checks happen as part of the
locking process, which is implemented separately for each system. We may
want to factor this out somehow, but it's beyond the scope of this
patch. (Another curiosity is that the messages in the reftable code are
marked for translation, but the ones in the files backend are not. I
followed local convention in each case, but we may want to harmonize
this at some point).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a new addition via either `reftable_stack_new_addition()`
or its convenince wrapper `reftable_stack_add()` we:
1. Create the "tables.list.lock" file.
2. Verify that the current version of the "tables.list" file is
up-to-date.
3. Write the new table records if so.
By default, the second step would cause us to bail out if we see that
there has been a concurrent write to the stack that made our in-memory
copy of the stack out-of-date. This is a safety mechanism to not write
records to the stack based on outdated information.
The downside though is that concurrent writes may now cause us to bail
out, which is not a good user experience. In addition, this isn't even
necessary for us, as Git knows to perform all checks for the old state
of references under the lock. (Well, in all except one case: when we
expire the reflog we first create the log iterator before we create the
lock, but this ordering is fixed as part of this commit.)
Consequently, most writers pass the `REFTABLE_STACK_NEW_ADDITION_RELOAD`
flag. The effect of this flag is that we reload the stack after having
acquired the lock in case the stack is out-of-date. This plugs the race
with concurrent writers, but we continue performing the verifications of
the expected old state to catch actual conflicts in the references we
are about to write.
Adapt the remaining callsites that don't yet pass this flag to do so.
While at it, drop a needless manual reload.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `reftable_stack_add()` function is a simple wrapper to lock the
stack, add records to it via a callback and then commit the
result. One problem with it though is that it doesn't accept any flags
for creating the addition. This makes it impossible to automatically
reload the stack in case it was modified before we managed to lock the
stack.
Add a `flags` field to plug this gap and pass it through accordingly.
For now this new flag won't be used by us, but it will be used by
libgit2.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With `refs_for_each_reflog_ent()` callers can iterate through all the
reflog entries for a given reference. The callback that is being invoked
for each such entry does not receive the name of the reference that we
are currently iterating through. This isn't really a limiting factor, as
callers can simply pass the name via the callback data.
But this layout sometimes does make for a bit of an awkward calling
pattern. One example: when iterating through all reflogs, and for each
reflog we iterate through all refnames, we have to do some extra book
keeping to track which reference name we are currently yielding reflog
entries for.
Change the signature of the callback function so that the reference name
of the reflog gets passed through to it. Adapt callers accordingly and
start using the new parameter in trivial cases. The next commit will
refactor the reference migration logic to make use of this parameter so
that we can simplify its logic a bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When migrating reflog entries between different storage formats we end
up with invalid old object IDs for the migrated entries: instead of
writing the old object ID of the to-be-migrated entry, we end up with
the all-zeroes object ID.
The root cause of this issue is that we don't know to use the old object
ID provided by the caller. Instead, we manually resolve the old object
ID by resolving the current value of its matching reference. But as that
reference does not yet exist in the target ref storage we always end up
resolving it to all-zeroes.
This issue got unnoticed as there is no user-facing command that would
even show the old object ID. While `git log -g` knows to show the new
object ID, we don't have any formatting directive to show the old object
ID.
Fix the bug by introducing a new flag `REF_LOG_USE_PROVIDED_OIDS`. If
set, backends are instructed to use the old and new object IDs provided
by the caller, without doing any manual resolving. Set this flag in
`ref_transaction_update_reflog()`.
Amend our tests in t1460-refs-migrate to use our test tool to read
reflog entries. This test tool prints out both old and new object ID of
each reflog entry, which fixes the test gap. Furthermore it also prints
the full identity used to write the reflog, which provides test coverage
for the previous commit in this patch series that fixed the identity for
migrated reflogs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `REF_HAVE_OLD` flag indicates whether a given ref update has its old
object ID set. If so, the value of that field is used to verify whether
the current state of the reference matches this expected state. It is
thus an important part of mitigating races with a concurrent process
that updates the same set of references.
When writing reflogs though we explicitly unset that flag. This is a
sensible thing to do: the old state of reflog entry updates may not
necessarily match the current on-disk state of its accompanying ref, but
it's only intended to signal what old object ID we want to write into
the new reflog entry. For example when migrating refs we end up writing
many reflog entries for a single reference, and most likely those reflog
entries will have many different old object IDs.
But unsetting this flag also removes a useful signal, namely that the
caller _did_ provide an old object ID for a given reflog entry. This
signal will become useful in a subsequent commit, where we add a new
flag that tells the transaction to use the provided old and new object
IDs to write a reflog entry. The `REF_HAVE_OLD` flag is then used as a
signal to verify that the caller really did provide an old object ID.
Stop unsetting the flag so that we can use it as this described signal
in a subsequent commit. Skip checking the old object ID for log-only
updates so that we don't expect it to match the current on-disk state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config API had a set of convenience wrapper functions that
implicitly use the_repository instance; they have been removed and
inlined at the calling sites.
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref iterator exposes a `ref_iterator_seek()` function. The name
suggests that this would seek the iterator to a specific reference in
some ways similar to how `fseek()` works for the filesystem.
However, the function actually sets the prefix for refs iteration. So
further iteration would only yield references which match the particular
prefix. This is a bit confusing.
Let's add a 'flags' field to the function, which when set with the
'REF_ITERATOR_SEEK_SET_PREFIX' flag, will set the prefix for the
iteration in-line with the existing behavior. Otherwise, the reference
backends will simply seek to the specified reference and clears any
previously set prefix. This allows users to start iteration from a
specific reference.
In the packed and reftable backend, since references are available in a
sorted list, the changes are simply setting the prefix if needed. The
changes on the files-backend are a little more involved, since the files
backend uses the 'ref-cache' mechanism. We move out the existing logic
within `cache_ref_iterator_seek()` to `cache_ref_iterator_set_prefix()`
which is called when the 'REF_ITERATOR_SEEK_SET_PREFIX' flag is set. We
then parse the provided seek string and set the required levels and
their indexes to ensure that seeking is possible.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updating multiple references have only been possible in all-or-none
fashion with transactions, but it can be more efficient to batch
multiple updates even when some of them are allowed to fail in a
best-effort manner. A new "best effort batches of updates" mode
has been introduced.
* kn/non-transactional-batch-updates:
update-ref: add --batch-updates flag for stdin mode
refs: support rejection in batch updates during F/D checks
refs: implement batch reference update support
refs: introduce enum-based transaction error types
refs/reftable: extract code from the transaction preparation
refs/files: remove duplicate duplicates check
refs: move duplicate refname update check to generic layer
refs/files: remove redundant check in split_symref_update()
|
|
The `refs_verify_refnames_available()` is used to batch check refnames
for F/D conflicts. While this is the more performant alternative than
its individual version, it does not provide rejection capabilities on a
single update level. For batched updates, this would mean a rejection of
the entire transaction whenever one reference has a F/D conflict.
Modify the function to call `ref_transaction_maybe_set_rejected()` to
check if a single update can be rejected. Since this function is only
internally used within 'refs/' and we want to pass in a `struct
ref_transaction *` as a variable. We also move and mark
`refs_verify_refnames_available()` to 'refs-internal.h' to be an
internal function.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
