| Age | Commit message (Collapse) | Author |
|---|
|
The `promisor_remote_reply()` function performs two tasks:
1. It uses filter_promisor_remote() to parse the server's
"promisor-remote" advertisement and to mark accepted remotes in the
repository configuration.
2. It assembles a reply string containing the accepted remote names to
send back to the server.
In a following commit, the fetch-pack logic will need to trigger the
side effect (1) to ensure the repository state is correct, but it will
not need to send a reply (2).
To avoid assembling a reply string when it is not needed, let's change
the signature of promisor_remote_reply(). It will now return `void` and
accept a second `char **accepted_out` argument. Only if that argument
is not NULL will a reply string be assembled and returned back to the
caller via that argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, advertised filters are only kept in memory temporarily
during parsing, or persisted to disk if `promisor.storeFields`
contains 'partialCloneFilter'.
In a following commit though, we will add a `--filter=auto` option.
This option will enable the client to use the filters that the server
is suggesting for the promisor remotes the client accepts.
To use them even if `promisor.storeFields` is not configured, these
filters should be stored somewhere for the current session.
Let's add an `advertised_filter` field to `struct promisor_remote`
for that purpose.
To ensure that the filters are available in all cases,
filter_promisor_remote() captures them into a temporary list and
applies them to the `promisor_remote` structs after the potential
configuration reload.
Then the accepted remotes are marked as `accepted` in the repository
state. This ensures that subsequent calls to look up accepted remotes
(like in the filter construction below) actually find them.
In a following commit, we will add a `--filter=auto` option that will
enable a client to use the filters suggested by the server for the
promisor remotes the client accepted.
To enable the client to construct a filter spec based on these filters,
let's also add a `promisor_remote_construct_filter(repo)` function.
This function:
- iterates over all accepted promisor remotes in the repository,
- collects the filters advertised for them (using `advertised_filter`
added in this commit, and
- generates a single filter spec for them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a server S knows that some objects from a repository are available
from a promisor remote X, S might want to suggest to a client C cloning
or fetching the repo from S that C may use X directly instead of S for
these objects.
Note that this could happen both in the case S itself doesn't have the
objects and borrows them from X, and in the case S has the objects but
knows that X is better connected to the world (e.g., it is in a
$LARGEINTERNETCOMPANY datacenter with petabit/s backbone connections)
than S. Implementation of the latter case, which would require S to
omit in its response the objects available on X, is left for future
improvement though.
Then C might or might not, want to get the objects from X. If S and C
can agree on C using X directly, S can then omit objects that can be
obtained from X when answering C's request.
To allow S and C to agree and let each other know about C using X or
not, let's introduce a new "promisor-remote" capability in the
protocol v2, as well as a few new configuration variables:
- "promisor.advertise" on the server side, and:
- "promisor.acceptFromServer" on the client side.
By default, or if "promisor.advertise" is set to 'false', a server S will
not advertise the "promisor-remote" capability.
If S doesn't advertise the "promisor-remote" capability, then a client C
replying to S shouldn't advertise the "promisor-remote" capability
either.
If "promisor.advertise" is set to 'true', S will advertise its promisor
remotes with a string like:
promisor-remote=<pr-info>[;<pr-info>]...
where each <pr-info> element contains information about a single
promisor remote in the form:
name=<pr-name>[,url=<pr-url>]
where <pr-name> is the urlencoded name of a promisor remote and
<pr-url> is the urlencoded URL of the promisor remote named <pr-name>.
For now, the URL is passed in addition to the name. In the future, it
might be possible to pass other information like a filter-spec that the
client may use when cloning from S, or a token that the client may use
when retrieving objects from X.
It is C's responsibility to arrange how it can reach X though, so pieces
of information that are usually outside Git's concern, like proxy
configuration, must not be distributed over this protocol.
It might also be possible in the future for "promisor.advertise" to have
other values. For example a value like "onlyName" could prevent S from
advertising URLs, which could help in case C should use a different URL
for X than the URL S is using. (The URL S is using might be an internal
one on the server side for example.)
By default or if "promisor.acceptFromServer" is set to "None", C will
not accept to use the promisor remotes that might have been advertised
by S. In this case, C will not advertise any "promisor-remote"
capability in its reply to S.
If "promisor.acceptFromServer" is set to "All" and S advertised some
promisor remotes, then on the contrary, C will accept to use all the
promisor remotes that S advertised and C will reply with a string like:
promisor-remote=<pr-name>[;<pr-name>]...
where the <pr-name> elements are the urlencoded names of all the
promisor remotes S advertised.
In a following commit, other values for "promisor.acceptFromServer" will
be implemented, so that C will be able to decide the promisor remotes it
accepts depending on the name and URL it received from S. So even if
that name and URL information is not used much right now, it will be
needed soon.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The out parameter of `git_config_string()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"promisor-remote.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No caller of promisor_remote_get_direct() is checking its return value,
so remove it.
Not checking the return value means that the user would not know
whether the failure of reading an object is due to the promisor remote
not supplying the object or because of local repository corruption, but
this will be fixed in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using global variables to store promisor remote information,
store this config in struct repository instead, and add
repository-agnostic non-static functions corresponding to the existing
non-static functions that only work on the_repository.
The actual lazy-fetching of missing objects currently does not work on
repositories other than the_repository, and will still not work after
this commit, so add a BUG message explaining this. A subsequent commit
will remove this limitation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move repository_format_partial_clone, which is currently a global
variable, into struct repository. (Full support for per-repository
partial clone config will be done in a subsequent commit - this is split
into its own commit because of the extent of the changes needed.)
The new repo-specific variable cannot be set in
check_repository_format_gently() (as is currently), because that
function does not know which repo it is operating on (or even whether
the value is important); therefore this responsibility is delegated to
the outermost caller that knows. Of all the outermost callers that know
(found by looking at all functions that call clear_repository_format()),
I looked at those that either read from the main Git directory or write
into a struct repository. These callers have been modified accordingly
(write to the_repository in the former case and write to the given
struct repository in the latter case).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The variable core_partial_clone_filter_default has been unused since
fa3d1b63e8 ("promisor-remote: parse remote.*.partialclonefilter",
2019-06-25), when Git was changed to refer to
remote.*.partialclonefilter as the default filter when fetching in a
partial clone, but (perhaps inadvertently) there was no fallback to
core.partialclonefilter.
One alternative is to add the fallback, but the aforementioned change
was made more than a year ago and I have not heard of any complaints
regarding this matter. In addition, there is currently no mention of
core.partialclonefilter in the user documentation. So it seems best to
reaffirm that Git will only support remote.*.partialclonefilter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are 3 callers to promisor_remote_get_direct() that first check if
the number of objects to be fetched is equal to 0. Fold that check into
promisor_remote_get_direct(), and in doing so, be explicit as to what
promisor_remote_get_direct() does if oid_nr is 0 (it returns 0, success,
immediately).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dev support.
* dl/honor-cflags-in-hdr-check:
ci: run `hdr-check` as part of the `Static Analysis` job
Makefile: emulate compile in $(HCO) target better
pack-bitmap.h: remove magic number
promisor-remote.h: include missing header
apply.h: include missing header
|
|
When we ran `make hdr-check`, we got the following warning message:
promisor-remote.h:21:46: warning: declaration of 'struct repository' will not be visible outside of this function [-Wvisibility]
extern int promisor_remote_get_direct(struct repository *repo,
^
1 warning generated.
This was caused by a missing reference to `struct repository`, which is
defined in "repository.h".
Include this missing header to fix this warning.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During the creation of this file, each time a new function declaration
was introduced, it included an `extern`. However, starting from
554544276a (*.[ch]: remove extern from function declarations using
spatch, 2019-04-29), we've been actively trying to prevent externs from
being used in function declarations because they're unnecessary.
Remove these spurious `extern`s.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it possible to specify a different partial clone
filter for each promisor remote.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will need to reinitialize the promisor remote configuration
as we will make some changes to it in a later commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is implemented for now by calling fetch_objects(). It fetches
from all the promisor remotes.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The promisor-remote.{c,h} files will contain functions to
manage many promisor remotes.
We expect that there will not be a lot of promisor remotes,
so it is ok to use a simple linked list to manage them.
Helped-by: Jeff King <peff@peff.net>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
