| Age | Commit message (Collapse) | Author |
|---|
|
Fix a regression in writing the commit-graph where commits with dates
exceeding 34 bits (beyond year 2514) could cause an underflow and
crash Git during the generation data overflow chunk writing.
* ps/commit-graph-overflow-fix:
commit-graph: fix writing generations with dates exceeding 34 bits
|
|
The `timestamp_t` type is declared as `uintmax_t` and thus typically has
64 bits of precision. Usually, the full precision of such dates is not
required: it would be comforting to know that Git is still around in
millions of years, but all in all the chance is rather low.
We abuse this fact in the commit-graph: instead of storing the full 64
bits of precision, committer dates only store 34 bits. This is still
plenty of headroom, as it means that we can represent dates until year
2514. Commits which are dated beyond that year will simply get a date
whose remaining bits are masked.
The result of this is somewhat curious: the committer date will be
different depending on whether a commit gets parsed via the commit-graph
or via the object database. This isn't really too much of an issue in
general though, as we don't typically use the date parsed from the
commit-graph in user-facing output.
But with 024b4c9697 (commit: make `repo_parse_commit_no_graph()` more
robust, 2026-02-16) it started to become a problem when writing the
commit-graph itself. This commit changed `repo_parse_commit_no_graph()`
so that we re-parse the commit via the object database in case it was
already parsed beforehand via the commit-graph.
The consequence is that we may now act with two different commit dates
at different stages:
- Initially, we use the 34-bit precision timestamp when writing the
chunk generation data. We thus correctly compute the offsets
relative to the on-disk timestamp here.
- Later, when writing the overflow data, we may end up with the
full-precision timestamp. When the date is larger than 34 bits the
result of this is an underflow when computing the offset.
This causes a mismatch in the number of generation data overflow records
we want to write, and that ultimately causes Git to die.
Introduce a new helper function that computes the generation offset for
a commit while correctly masking the date to 34 bits. This makes the
previously-implicit assumptions about the commit date precision explicit
and thus hopefully less fragile going forward.
Adapt sites that compute the offset to use the function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `odb_for_each_object()` function only accepts a bitset of flags. In
a subsequent commit we'll want to change object iteration to also
support iterating over only those objects that have a specific prefix.
While we could of course add the prefix to the function signature, or
alternatively introduce a new function, both of these options don't
really seem to be that sensible.
Instead, introduce a new `struct odb_for_each_object_options` that can
be passed to a new `odb_for_each_object_ext()` function. Splice through
the options structure into the respective object database sources.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the preceding commit, introduce counting of objects on the
object database level, replacing the logic that we have in
`repo_approximate_object_count()`.
Note that the function knows to cache the object count. It's unclear
whether this cache is really required as we shouldn't have that many
cases where we count objects repeatedly. But to be on the safe side the
caching mechanism is retained, with the only excepting being that we
also have to use the passed flags as caching key.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "files" backend is implemented as a pointer in the `struct
odb_source`. This contradicts our typical pattern for pluggable backends
like we use it for example in the ref store or for object database
streams, where we typically embed the generic base structure in the
specialized implementation. This pattern has a couple of small benefits:
- We avoid an extra allocation.
- We hide implementation details in the generic structure.
- We can easily downcast from a generic backend to the specialized
structure and vice versa because the offsets are known at compile
time.
- It becomes trivial to identify locations where we depend on backend
specific logic because the cast needs to be explicit.
Refactor our "files" object database source to do the same and embed the
`struct odb_source` in the `struct odb_source_files`.
There are still a bunch of sites in our code base where we do have to
access internals of the "files" backend. The intent is that those will
go away over time, but this will certainly take a while. Meanwhile,
provide a `odb_source_files_downcast()` function that can convert a
generic source into a "files" source.
As we only have a single source the downcast succeeds unconditionally
for now. Eventually though the intent is to make the cast `BUG()` in
case the caller requests to downcast a non-"files" backend to a "files"
backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new "files" object database source. This source encapsulates
access to both loose object files and the packfile store, similar to how
the "files" backend for refs encapsulates access to loose refs and the
packed-refs file.
Note that for now the "files" source is still a direct member of a
`struct odb_source`. This architecture will be reversed in the next
commit so that the files source contains a `struct odb_source`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/odb-for-each-object:
odb: drop unused `for_each_{loose,packed}_object()` functions
reachable: convert to use `odb_for_each_object()`
builtin/pack-objects: use `packfile_store_for_each_object()`
odb: introduce mtime fields for object info requests
treewide: drop uses of `for_each_{loose,packed}_object()`
treewide: enumerate promisor objects via `odb_for_each_object()`
builtin/fsck: refactor to use `odb_for_each_object()`
odb: introduce `odb_for_each_object()`
packfile: introduce function to iterate through objects
packfile: extract function to iterate through objects of a store
object-file: introduce function to iterate through objects
object-file: extract function to read object info from path
odb: fix flags parameter to be unsigned
odb: rename `FOR_EACH_OBJECT_*` flags
|
|
Rename three functions around the commit_list data structure.
* ps/commit-list-functions-renamed:
commit: rename `free_commit_list()` to conform to coding guidelines
commit: rename `reverse_commit_list()` to conform to coding guidelines
commit: rename `copy_commit_list()` to conform to coding guidelines
|
|
We're using `for_each_loose_object()` and `for_each_packed_object()` at
a couple of callsites to enumerate all loose and packed objects,
respectively. These functions will be removed in a subsequent commit in
favor of the newly introduced `odb_source_loose_for_each_object()` and
`packfile_store_for_each_object()` replacements.
Prepare for this by refactoring the sites accordingly.
Note that ideally, we'd convert all callsites to use the generic
`odb_for_each_object()` function already. But for some callers this is
not possible (yet), and it would require some significant refactorings
to make this work. Converting these site will thus be deferred to a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the `FOR_EACH_OBJECT_*` flags to have an `ODB_` prefix. This
prepares us for a new upcoming `odb_for_each_object()` function and
ensures that both the function and its flags have the same prefix.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object-info API has been cleaned up.
* ps/read-object-info-improvements:
packfile: drop repository parameter from `packed_object_info()`
packfile: skip unpacking object header for disk size requests
packfile: disentangle return value of `packed_object_info()`
packfile: always populate pack-specific info when reading object info
packfile: extend `is_delta` field to allow for "unknown" state
packfile: always declare object info to be OI_PACKED
object-file: always set OI_LOOSE when reading object info
|
|
* ps/read-object-info-improvements:
packfile: drop repository parameter from `packed_object_info()`
packfile: skip unpacking object header for disk size requests
packfile: disentangle return value of `packed_object_info()`
packfile: always populate pack-specific info when reading object info
packfile: extend `is_delta` field to allow for "unknown" state
packfile: always declare object info to be OI_PACKED
object-file: always set OI_LOOSE when reading object info
|
|
Our coding guidelines say that:
Functions that operate on `struct S` are named `S_<verb>()` and should
generally receive a pointer to `struct S` as first parameter.
While most of the functions related to `struct commit_list` already
follow that naming schema, `free_commit_list()` doesn't.
Rename the function to address this and adjust all of its callers. Add a
compatibility wrapper for the old function name to ease the transition
and avoid any semantic conflicts with in-flight patch series. This
wrapper will be removed once Git 2.53 has been released.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `packed_object_info()` takes a packfile and offset and
returns the object info for the corresponding object. Despite these two
parameters though it also takes a repository pointer. This is redundant
information though, as `struct packed_git` already has a repository
pointer that is always populated.
Drop the redundant parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a commit array implementation with commit_stack.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the "files" and "reftable" backend are able to store peeled values
for tags in the respective formats. This allows for a more efficient
lookup of the target object of such a tag without having to manually
peel via the object database.
The infrastructure to access these peeled object IDs is somewhat funky
though. When iterating through objects, we store a pointer reference to
the current iterator in a global variable. The callbacks invoked by that
iterator are then expected to call `peel_iterated_oid()`, which checks
whether the globally-stored iterator's current reference refers to the
one handed into that function. If so, we ask the iterator to peel the
object, otherwise we manually peel the object via the object database.
Depending on global state like this is somewhat weird and also quite
fragile.
Introduce a new `struct reference::peeled_oid` field that can be
populated by the reference backends. This field can be accessed via a
new function `reference_get_peeled_oid()` that either uses that value,
if set, or alternatively peels via the ODB. With this change we don't
have to rely on global state anymore, but make the peeled object ID
available to the callback functions directly.
Adjust trivial callers that already have a `struct reference` available.
Remaining callers will be adjusted in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `each_ref_fn` callback function type is used across our code base
for several different functions that iterate through reference. There's
a bunch of callbacks implementing this type, which makes any changes to
the callback signature extremely noisy. An example of the required churn
is e8207717f1 (refs: add referent to each_ref_fn, 2024-08-09): adding a
single argument required us to change 48 files.
It was already proposed back then [1] that we might want to introduce a
wrapper structure to alleviate the pain going forward. While this of
course requires the same kind of global refactoring as just introducing
a new parameter, it at least allows us to more change the callback type
afterwards by just extending the wrapper structure.
One counterargument to this refactoring is that it makes the structure
more opaque. While it is obvious which callsites need to be fixed up
when we change the function type, it's not obvious anymore once we use
a structure. That being said, we only have a handful of sites that
actually need to populate this wrapper structure: our ref backends,
"refs/iterator.c" as well as very few sites that invoke the iterator
callback functions directly.
Introduce this wrapper structure so that we can adapt the iterator
interfaces more readily.
[1]: <ZmarVcF5JjsZx0dl@tanuki>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around commit-graph.
* ps/commit-graph-per-object-source:
commit-graph: pass graphs that are to be merged as parameter
commit-graph: return commit graph from `repo_find_commit_pos_in_graph()`
commit-graph: return the prepared commit graph from `prepare_commit_graph()`
revision: drop explicit check for commit graph
blame: drop explicit check for commit graph
|
|
A new command "git last-modified" has been added to show the closest
ancestor commit that touched each path.
* tc/last-modified:
last-modified: use Bloom filters when available
t/perf: add last-modified perf script
last-modified: new subcommand to show when files were last modified
|
|
When determining whether or not we want to merge a commit graph chain we
retrieve the graph that is to be merged via the context's repository.
With an upcoming change though it will become a bit more complex to
figure out the commit graph, which would lead to code duplication.
Prepare for this change by passing the graph that is to be merged as a
parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `repo_find_commit_pos_in_graph()` takes a commit as input
and tries to figure out whether the given repository has a commit graph
that contains that specific commit. If so, it returns the corresponding
position of that commit inside the graph.
Right now though we only return the position, but not the actual graph
that the commit has been found in. This is sensible as repositories
always have the graph in `struct repository::objects::commit_graph`.
Consequently, the caller always knows where to find it.
But in a subsequent change we're going to move the graph into the object
sources. This would require callers of the function to loop through all
sources to find the relevant commit graph.
Refactor the code so that we instead return the commit-graph that the
commit has been found with.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When making use of commit graphs, one needs to first prepare them by
calling `prepare_commit_graph()`. Once that function was called and the
commit graph was prepared successfully, the caller is now expected to
access the graph directly via `struct object_database::commit_graph`.
In a subsequent change, we're going to move the commit graph pointer
from `struct object_database` into `struct odb_source`. With this
change, semantics will change so that we use the commit graph of the
first source that has one. Consequently, all callers that currently
deference the `commit_graph` pointer would now have to loop around the
list of sources to find the commit graph.
This would become quite unwieldy. So instead of shifting the burden onto
such callers, adapt `prepare_commit_graph()` to return the prepared
commit graph, if any. Like this, callers are expected to call that
function and then use the returned commit graph.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our 'git last-modified' performs a revision walk, and computes a diff at
each point in the walk to figure out whether a given revision changed
any of the paths it considers interesting.
When changed-path Bloom filters are available, we can avoid computing
many such diffs. Before computing a diff, we first check if any of the
remaining paths of interest were possibly changed at a given commit by
consulting its Bloom filter. If any of them are, we are resigned to
compute the diff.
If none of those queries returned "maybe", we know that the given commit
doesn't contain any changed paths which are interesting to us. So, we
can avoid computing it in this case.
Comparing the perf test results on git.git:
Test HEAD~ HEAD
------------------------------------------------------------------------------------
8020.1: top-level last-modified 4.49(4.34+0.11) 2.22(2.05+0.09) -50.6%
8020.2: top-level recursive last-modified 5.64(5.45+0.11) 5.62(5.30+0.11) -0.4%
8020.3: subdir last-modified 0.11(0.06+0.04) 0.07(0.03+0.04) -36.4%
Based-on-patch-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many of the commit-graph related functions take in both a repository and
the object database source (directly or via `struct commit_graph`) for
which we are supposed to load such a commit-graph. In the best case this
information is simply redundant as the source already contains a
reference to its owning object database, which in turn has a reference
to its repository. In the worst case this information could even
mismatch when passing in a source that doesn't belong to the same
repository.
Refactor the code so that we only pass in the object database source in
those cases.
There is one exception though, namely `load_commit_graph_chain_fd_st()`,
which is responsible for loading a commit-graph chain. It is expected
that parts of the commit-graph chain aren't located in the same object
source as the chain file itself, but in a different one. Consequently,
this function doesn't work on the source level but on the database level
instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's still a bunch of uses of `the_repository` in "commit-graph.c",
which we want to stop using due to it being a global variable. Refactor
the code to stop using `the_repository` in favor of the repository
provided via the calling context.
This allows us to drop the `USE_THE_REPOSITORY_VARIABLE` macro.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_hash_algo` as it implicitly relies on `the_repository`.
Instead, we either use the hash algo provided via the context or, if
there is no such hash algo, we use `the_repository` explicitly. Such
uses will be removed in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor `parse_commit_graph()` so that it takes a repository instead of
taking repository settings. On the one hand this allows us to get rid of
instances where we access `the_hash_algo` by using the repository's hash
algorithm instead. On the other hand it also allows us to move the call
of `prepare_repo_settings()` into the function itself.
Note that there's one small catch, as the commit-graph fuzzer calls this
function directly without having a fully functional repository at hand.
And while the fuzzer already initializes `the_repository` with relevant
info, the call to `prepare_repo_settings()` would fail because we don't
have a fully-initialized repository.
Work around the issue by also settings `settings.initialized` to pretend
that we've already read the settings.
While at it, remove the redundant `parse_commit_graph()` declaration in
the fuzzer. It was added together with aa658574bf (commit-graph, fuzz:
add fuzzer for commit-graph, 2019-01-15), but as we also declared the
same function in "commit-graph.h" it wasn't ever needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph stores the length of the hash algorithm it uses. In
subsequent commits we'll need to pass the whole hash algorithm around
though, which we currently don't have access to.
Refactor the code so that we store the hash algorithm instead of only
its size.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two macros `GRAPH_DATA_WIDTH` and `GRAPH_MIN_SIZE` that compute
hash-dependent sizes. They do so by using the global `the_hash_algo`
variable though, which we want to get rid of over time.
Convert these macros into functions that accept the hash algorithm as
input parameter. Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `has_object()` to `odb_has_object()` to match other functions
related to the object database and our modern coding guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions to manage alternates all depend on `the_repository`.
Refactor them to accept an object database as a parameter and adjust all
callers. The functions are renamed accordingly.
Note that right now the situation is still somewhat weird because we end
up using the object store path provided by the object store's repository
anyway. Consequently, we could have instead passed in a pointer to the
repository instead of passing in the pointer to the object store. This
will be addressed in subsequent commits though, where we will start to
use the path owned by the object store itself.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `object_directory` structure is used as an access point for a single
object directory like ".git/objects". While the structure isn't yet
fully self-contained, the intent is for it to eventually contain all
information required to access objects in one specific location.
While the name "object directory" is a good fit for now, this will
change over time as we continue with the agenda to make pluggable object
databases a thing. Eventually, objects may not be accessed via any kind
of directory at all anymore, but they could instead be backed by any
kind of durable storage mechanism. While it seems quite far-fetched for
now, it is thinkable that eventually this might even be some form of a
database, for example.
As such, the current name of this structure will become worse over time
as we evolve into the direction of pluggable ODBs. Immediate next steps
will start to carve out proper self-contained object directories, which
requires us to pass in these object directories as parameters. Based on
our modern naming schema this means that those functions should then be
named after their subsystem, which means that we would start to bake the
current name into the codebase more and more.
Let's preempt this by renaming the structure. There have been a couple
alternatives that were discussed:
- `odb_backend` was discarded because it led to the association that
one object database has a single backend, but the model is that one
alternate has one backend. Furthermore, "backend" is more about the
actual backing implementation and less about the high-level concept.
- `odb_alternate` was discarded because it is a bit of a stretch to
also call the main object directory an "alternate".
Instead, pick `odb_source` as the new name. It makes it sufficiently
clear that there can be multiple sources and does not cause confusion
when mixed with the already-existing "alternate" terminology.
In the future, this change allows us to easily introduce for example a
`odb_files_source` and other format-specific implementations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `raw_object_store` structure is the central entry point for reading
and writing objects in a repository. The main purpose of this structure
is to manage object directories and provide an interface to access and
write objects in those object directories.
Right now, many of the functions associated with the raw object store
implicitly rely on `the_repository` to get access to its `objects`
pointer, which is the `raw_object_store`. As we want to generally get
rid of using `the_repository` across our codebase we will have to
convert this implicit dependency on this global variable into an
explicit parameter.
This conversion can be done by simply passing in an explicit pointer to
a repository and then using its `->objects` pointer. But there is a
second effort underway, which is to make the object subsystem more
selfcontained so that we can eventually have pluggable object backends.
As such, passing in a repository wouldn't make a ton of sense, and the
goal is to convert the object store interfaces such that we always pass
in a reference to the `raw_object_store` instead.
This will expose the `raw_object_store` type to a lot more callers
though, which surfaces that this type is named somewhat awkwardly. The
"raw_" prefix makes readers wonder whether there is a non-raw variant of
the object store, but there isn't. Furthermore, we nowadays want to name
functions in a way that they can be clearly attributed to a specific
subsystem, but calling them e.g. `raw_object_store_has_object()` is just
too unwieldy, even when dropping the "raw_" prefix.
Instead, rename the structure to `object_database`. This term is already
used a lot throughout our codebase, and it cannot easily be mistaken for
"object directories", either. Furthermore, its acronym ODB is already
well-known and works well as part of a function's name, like for example
`odb_has_object()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted fixes for issues found with CodeQL.
* js/misc-fixes:
sequencer: stop pretending that an assignment is a condition
bundle-uri: avoid using undefined output of `sscanf()`
commit-graph: avoid using stale stack addresses
trace2: avoid "futile conditional"
Avoid redundant conditions
fetch: avoid unnecessary work when there is no current branch
has_dir_name(): make code more obvious
upload-pack: rename `enum` to reflect the operation
commit-graph: avoid malloc'ing a local variable
fetch: carefully clear local variable's address after use
commit: simplify code
|
|
Leakfix.
* ly/commit-graph-fill-oids-leakfix:
commit-graph: fix memory leak when `fill_oids_from_packs()` fails
|
|
In commit-graph.c:fill_oids_from_packs, if open_pack_index failed,
memory allocated and returned by add_packed_git will leak. Simply
add close_pack and free(p) will solve this problem.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code is a bit too hard to reason about to fully assess whether the
`fill_commit_graph_info()` function is called at all after
`write_commit_graph()` returns (and hence the stack variable
`topo_levels` goes out of context).
Let's simply make sure that the stack address is no longer used at that
stage, thereby making the code quite a bit easier to reason about.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do need a context to write the commit graph, but that context is only
needed during the life time of `commit_graph_write()`, therefore it can
easily be a stack variable.
This also helps CodeQL recognize that it is safe to assign the address
of other local variables to the context's fields.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We store the replacement data in an oidmap, which is itself a pointer in
the raw_object_store struct. But there's no need for an extra pointer
indirection here. It is always allocated and initialized along with the
containing struct, and we never check it for NULL-ness.
Let's embed the map directly in the struct, which is simpler and avoids
extra pointer chasing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers which want to know how many items are in an oidmap have to look
at the underlying hashmap struct, leaking an implementation detail.
Let's provide a type-appropriate wrapper and use it.
Note in the call from lookup_replace_object(), the caller was actually
looking at the hashmap's tablesize parameter (the allocated size of the
table) rather than hashmap_get_size(), the number of items in the table.
This probably should have been checking the number of items all along,
but the two are functionally equivalent here since we only add to the
map and never remove anything. Thus if there was any allocation, it was
because there is at least one item.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `git_open_cloexec()` wrapper function provides the ability to open a
file with `O_CLOEXEC` in a platform-agnostic way. This function is
provided by "object-file.c" even though it is not specific to the object
subsystem at all.
Move the file into "compat/open.c". This file already exists before this
commit, but has only been compiled conditionally depending on whether or
not open(3p) may return EINTR. With this change we now unconditionally
compile the object, but wrap `git_open_with_retry()` in an ifdef.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `safe_create_leading_directories()` function and its relatives are
located in "object-file.c", which is not a good fit as they provide
generic functionality not related to objects at all. Move them into
"path.c", which already hosts `safe_create_dir()` and its relative
`safe_create_dir_in_gitdir()`.
"path.c" is free of `the_repository`, but the moved functions depend on
`the_repository` to read the "core.sharedRepository" config. Adapt the
function signature to accept a repository as argument to fix the issue
and adjust callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are multiple sites in "csum-file.c" where we use the global
`the_repository` variable, either explicitly or implicitly by using
`the_hash_algo`.
Refactor the code to stop using `the_repository` by adapting functions
to receive required data as parameters. Adapt callsites accordingly by
either using `the_repository->hash_algo`, or by using a context-provided
hash algorithm in case the subsystem already got rid of its dependency
on `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the preceding refactorings we now only have a couple of implicit
users of `the_repository` left in the "path" subsystem, all of which
depend on global state via `calc_shared_perm()`. Make the dependency on
`the_repository` explicit by passing the repo as a parameter instead and
adjust callers accordingly.
Note that this change bubbles up into a couple of subsystems that were
previously declared as free from `the_repository`. Instead of marking
all of them as `the_repository`-dependent again, we instead use the
repository that is available in the calling context. There are three
exceptions though with "copy.c", "pack-write.c" and "tempfile.c".
Adjusting these would require us to adapt callsites all over the place,
so this is left for a future iteration.
Mark "path.c" as free from `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "progress" subsystem by passing in a
repository when initializing `struct progress`. Furthermore, store a
pointer to the repository in that struct so that we can pass it to the
trace2 API when logging information.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
