| Age | Commit message (Collapse) | Author |
|---|
|
The uutils version of `dirname` has output that is inconsistent
with GNU coreutils. Prefer the GNU implementation of this command.
Signed-off-by: Colin Stagner <ask+git@howdoi.land>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We replaced deprecated macos-13 with macos-14 image in GitHub
Actions CI, but we forgot that the image is for arm64. We have
been seeing a lot of test failures ever since. Switch to arm64
binary for Perforce tests.
* jc/ci-use-arm64-p4-on-macos:
Use Perforce arm64 binary on macOS CI jobs
|
|
The previous step replaced deprecated macos-13 image with macos-14
image on GitHub Actions CI. While x86-64 binaries can work there,
because macos-14 images are arm64 based (we could replace it with
macos-14-large that is x86-64), it makes more sense to use arm64
binary there. Without this change, we have been getting unusually
higher rate of failures from random macOS CI jobs railing to run
t98xx series of tests.
Helped-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI improvements to handle the recent Rust integration better.
* ps/ci-rust:
rust: support for Windows
ci: verify minimum supported Rust version
ci: check for common Rust mistakes via Clippy
rust/varint: add safety comments
ci: check formatting of our Rust code
ci: deduplicate calls to `apt-get update`
|
|
In the current state of our Rust code base we don't really have any
requirements for the minimum supported Rust version yet, as we don't use
any features introduced by a recent version of Rust. Consequently, we
have decided that we want to aim for a rather old version and edition of
Rust, where the hope is that using an old version will make alternatives
like gccrs viable earlier for compiling Git.
But while we specify the Rust edition, we don't yet specify a Rust
version. And even if we did, the Rust version would only be enforced for
our own code, but not for any of our dependencies.
We don't yet have any dependencies at the current point in time. But
let's add some safeguards by specifying the minimum supported Rust
version and using cargo-msrv(1) to verify that this version can be
satisfied for all of our dependencies.
Note that we fix the version of cargo-msrv(1) at v0.18.1. This is the
latest release supported by Ubuntu's Rust version.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a CI check that uses Clippy to perform checks for common
mistakes and suggested code improvements. Clippy is the official static
analyser of the Rust project and thus the de-facto standard.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a CI check that verifies that our Rust code is well-formatted.
This check uses `cargo fmt`, which is a wrapper around rustfmt(1) that
executes formatting for all Rust source files. rustfmt(1) itself is the
de-facto standard for formatting code in the Rust ecosystem.
The rustfmt(1) tool allows to tweak the final format in theory. In
practice though, the Rust ecosystem has aligned on style "editions".
These editions only exist to ensure that any potential changes to the
style don't cause reformats to existing code bases. Other than that,
most Rust projects out there accept this default style of a specific
edition.
Let's do the same and use that default style. It may not be anyone's
favorite, but it is consistent and by making it part of our CI we also
enforce it right from the start.
Note that we don't have to pick a specific style edition here, as the
edition is automatically derived from the edition we have specified in
our "Cargo.toml" file.
The implemented script looks somewhat weird as we perfom manual error
handling instead of using something like `set -e`. The intent here is
that subsequent commits will add more checks, and we want to execute all
of these checks regardless of whether or not a previous check failed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When installing dependencies we first check for the distribution that is
in use and then we check for the specific job. In the first step we
already install all dependencies required to build and test Git, whereas
the second step installs a couple of additional dependencies that are
only required to perform job-specific tasks.
In both steps we use `apt-get update` to update our repository sources.
This is unnecessary though: all platforms that use Aptitude would have
already executed this command in the distro-specific step anyway.
Drop the redundant calls.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our CI script requires "sudo" that can be told to preserve
environment, but Ubuntu replaced with "sudo" with an implementation
that lacks the feature. Work this around by reinstalling the
original version.
* ps/ci-avoid-broken-sudo-on-ubuntu:
ci: fix broken jobs on Ubuntu 25.10 caused by switch to sudo-rs(1)
|
|
Ubuntu 25.10 has been released. One prominent change in this version of
Ubuntu is the switch to some Rust-based utilities. Part of this switch
is also that Ubuntu now defaults to sudo-rs(1).
Unfortunately, this breaks our CI because sudo-rs(1) does not support
the `--preserve-env` flag. Let's revert back to the C-based sudo(1)
implementation to fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable Rust for our breaking-changes jobs so that we can verify that the
build infrastructure and the converted Rust subsystems work as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "pedantic" CI job is building on Fedora with `DEVOPTS=pedantic`.
This build flag doesn't do anything anymore starting with 6a8cbc41ba
(developer: enable pedantic by default, 2021-09-03), where we have
flipped the default so that developers have to opt-out of pedantic
builds via the "no-pedantic" option. As such, all this job really does
is to do a normal build on Fedora, which isn't all that interesting.
Convert that job into a full build-and-test job that uses Meson with
breaking changes enabled. This plugs two gaps:
- We now test on another distro that we didn't run tests on
beforehand.
- We verify that breaking changes work as expected with Meson.
Furthermore, in a subsequent commit we'll modify both jobs that use
breaking changes to also enable Rust. By converting the Fedora job to
use Meson, we ensure that we test our Rust build infrastructure for both
build systems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further refinement on CI messages when an optional external
software is unavailable (e.g. due to third-party service outage).
* jc/ci-skip-unavailable-external-software:
ci: download JGit from maven, not eclipse.org
ci: update the message for unavailble third-party software
|
|
As Matthias Sohn, JGit maintainer, recommends, update the JGit
download link from repo.eclipse.org to a one in maven.org
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier fix added an extra message immediately after failing to
download a third-party package. But near the end of the script,
their availability is checked again and given a message.
Remove the new ones added with a recent fix, as they are redundant.
If we were to add more places to download these software (e.g. for
other platforms we currently do not download them on), the existing
warnning near the end of the script will also trigger.
While at it, as Dscho suggests, rewrite the WARNING: label on the
warning message to ::warning::, which presumably should be shown a
bit more prominently in the CI summary.
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure outage of third-party sites that supply P4, Git-LFS, and
JGit we use for testing would not prevent our CI jobs from running
at all.
* jc/ci-skip-unavailable-external-software:
ci: skip unavailable external software
|
|
The ci/install-dependencies.sh script used in a very early phase of
our CI jobs downloads Perforce, Git-LFS, and JGit, used for running
the test scripts. The test framework is prepared to properly skip
the tests that depend on these external software, but the CI script
is unnecessarily strict (due to its use of "set -e" in ci/lib.sh)
and fails the entire CI run before even starting to test the rest of
the system.
Notice a failure to download to any of these external software, but
keep going. We need to be careful about cleaning after a failed
wget, as a later part of the script that does:
if type jgit >/dev/null 2>&1
then
echo "$(tput setaf 6)JGit Version$(tput sgr0)"
jgit version
else
echo >&2 "WARNING: JGit wasn't installed, see above for clues why"
fi
will (surprise!) succeed running "type jgit", and then fail with
"jgit version", taking the whole thing down due to "set -e".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around CI breakage due to fedora base image getting updated.
* js/ci-fedora-gawk:
ci(pedantic): ensure that awk is installed
|
|
The image pointed to by the fedora:latest tag has moved from fedora
41 to 42. The fedora 41 container images have awk installed while
the fedora 42 images do not. That change is most likely just part
of reducing the size of the base container images.
In both AlmaLinux and Fedora (as well as other RHEL
derivatives/relatives), awk is provided by the gawk package.
On Fedora, `dnf install awk` would work, by using the package
filelist data to determine that /usr/bin/awk is provided by gawk and
installs gawk as a result.
On AlmaLinux (8 & 9, by quick testing by Todd), that is not the case
and you'd need to use `dnf install gawk` or `dnf install '*bin/awk'`
to get it installed. Having said that, awk _is_ included in the
current AlmaLinux 8 and 9 images, so it isn't strictly needed. But
it's probably better to be explicit that we need it installed, as a
defense against some future change to the AlmaLinux container
removing awk.
Because we know that on both of these distros, our scripts that call
for 'awk' had been using 'gawk' that was installed as part of the
base image, let's make sure that we explicitly install 'gawk'. If
the image already has it, it would be a no-op that does not cause
breakage.
Suggested-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `sparse` job still uses the `ubuntu-20.04` runner pool, but that
pool is about to go away, so let's stop using it.
There is no `sparse-22.04` artifact provided by the "Build sparse for
Ubuntu" Azure Pipeline, but that is not necessary anyway because Ubuntu
22.04 has the `sparse` package: https://packages.ubuntu.com/jammy/sparse
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Wire up credential helpers in our CI runs so that we can rest assured
that they compile and (if tests are available) function correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code paths to interact with zlib has been cleaned up in
preparation for building with zlib-ng.
* ps/zlib-ng:
ci: make "linux-musl" job use zlib-ng
ci: switch linux-musl to use Meson
compat/zlib: allow use of zlib-ng as backend
git-zlib: cast away potential constness of `next_in` pointer
compat/zlib: provide stubs for `deflateSetHeader()`
compat/zlib: provide `deflateBound()` shim centrally
git-compat-util: move include of "compat/zlib.h" into "git-zlib.h"
compat: introduce new "zlib.h" header
git-compat-util: drop `z_const` define
compat: drop `uncompress2()` compatibility shim
|
|
We don't yet have any test coverage for the new zlib-ng backend as part
of our CI. Add it by installing zlib-ng in Alpine Linux, which causes
Meson to pick it up automatically.
Note that we are somewhat limited with regards to where we run that job:
Debian-based distributions don't have zlib-ng in their repositories,
Fedora has it but doesn't run tests, and Alma Linux doesn't have the
package either. Alpine Linux does have it available and is running our
test suite, which is why it was picked.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch over the "linux-musl" job to use Meson instead of Makefiles. This
is done due to multiple reasons:
- It simplifies our CI infrastructure a bit as we don't have to
manually specify a couple of build options anymore.
- It verifies that Meson detects and sets those build options
automatically.
- It makes it easier for us to wire up a new CI job using zlib-ng as
backend.
One platform compatibility that Meson cannot easily detect automatically
is the `GIT_TEST_UTF8_LOCALE` variable used in tests. Wire up a build
option for it, which we set via a new "MESONFLAGS" environment variable.
Note that we also drop the CC variable, which is set to "gcc". We
already default to GCC when CC is unset in "ci/lib.sh", so this is not
needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We explicitly list the distro of Linux-based jobs, but it is equivalent
to the name of the image in almost all cases, except that colons are
replaced with dashes. Drop the redundant information and massage it in
our CI scripts, which is equivalent to how we do it in GitLab CI.
There are a couple of exceptions:
- The "linux32" job, whose distro name is different than the image
name. This is handled by adapting all sites to use the new name.
- The "alpine" and "fedora" jobs, neither of which specify a tag for
their image. This is handled by adding the "latest" tag.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The containerized jobs in GitHub Actions run as root, giving them
special permissions to for example delete files even when the user
shouldn't be able to due to file permissions. This limitation keeps us
from using containerized jobs for most of our Ubuntu-based jobs as it
causes a number of tests to fail.
Adapt the jobs to create a separate user that executes the test suite.
This follows similar infrastructure that we already have in GitLab CI.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Wire up CI builds for both GitLab and GitHub that use the Meson build
system.
While the setup is mostly trivial, one gotcha is the test output
directory used to be in "t/", but now it is contained in the build
directory. To unify the logic across Makefile- and Meson-based builds we
explicitly set up the `TEST_OUTPUT_DIRECTORY` variable so that it is the
same for both build systems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In general, we'd like to make sure Git works on the LTS versions of
major Linux distributions. To do that, let's add CI jobs for the oldest
regular (non-extended) LTS versions of the major distributions: Ubuntu
20.04, Debian 11, and RHEL 8. Because RHEL isn't available to the
public at no charge, use AlmaLinux, which is binary compatible with it.
Note that Debian does not offer the language-pack packages, but suitable
locale support can be installed with the locales-all package.
Otherwise, use the set of installation instructions which exist and are
most similar to the existing supported distros.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
We're no longer testing this version and it's well beyond regular LTS
support now, so remove the stanza for it from the case statement in our
CI code.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The way AsciiDoc is used for SYNOPSIS part of the manual pages has
been revamped. The sources, at least for the simple cases, got
vastly pleasant to work with.
* ja/doc-synopsis-markup:
doc: apply synopsis simplification on git-clone and git-init
doc: update the guidelines to reflect the current formatting rules
doc: introduce a synopsis typesetting
|
|
In order to follow the common manpage usage, the synopsis of the
commands needs to be heavily typeset. A first try was performed with
using native markup, but it turned out to make the document source
almost unreadable, difficult to write and prone to mistakes with
unwanted Asciidoc's role attributes.
In order to both simplify the writer's task and obtain a consistant
typesetting in the synopsis, a custom 'synopsis' paragraph type is
created and the processor for backticked text are modified. The
backends of asciidoc and asciidoctor take in charge to correctly add
the required typesetting.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI updates
* jk/ci-linux32-update:
ci: add Ubuntu 16.04 job to GitLab CI
ci: use regular action versions for linux32 job
ci: use more recent linux32 image
ci: unify ubuntu and ubuntu32 dependencies
ci: drop run-docker scripts
|
|
In the preceding commits we had to convert the linux32 job to be based
on Ubuntu 20.04 instead of Ubuntu 16.04 due to a limitation in GitHub
Workflows. This was the only job left that still tested against this old
but supported Ubuntu version, and we have no other jobs that test with a
comparatively old Linux distribution.
Add a new job to GitLab CI that tests with Ubuntu 16.04 to cover the
resulting test gap. GitLab doesn't modify Docker images in the same way
GitHub does and thus doesn't fall prey to the same issue. There are two
compatibility issues uncovered by this:
- Ubuntu 16.04 does not support HTTP/2 in Apache. We thus cannot set
`GIT_TEST_HTTPD=true`, which would otherwise cause us to fail when
Apache fails to start.
- Ubuntu 16.04 cannot use recent JGit versions as they depend on a
more recent Java runtime than we have available. We thus disable
installing any kind of optional dependencies that do not come from
the package manager.
These two restrictions are fine though, as we only really care about
whether Git compiles and runs on such old distributions in the first
place.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Xenial image we're using was released more than 8 years ago. This is
a problem for using some recent GitHub Actions scripts, as they require
Node.js 20, and all of the binaries they ship need glibc 2.28 or later.
We're not using them yet, but moving forward prepares us for a future
patch which will.
Xenial was actually the last official 32-bit Ubuntu release, but you can
still find i386 images for more recent releases. This patch uses Focal,
which was released in 2020 (and is the oldest one with glibc 2.28).
There are two small downsides here:
- while Xenial is pretty old, it is still in LTS support until April
2026. So there's probably some value in testing with such an old
system, and we're losing that.
- there are no i386 subversion packages in the Focal repository. So we
won't be able to test that (OTOH, we had never tested it until the
previous patch which unified the 32/64-bit dependency code).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The script to install dependencies has two separate entries for 32-bit
and 64-bit Ubuntu systems. This increases the maintenance burden since
both should need roughly the same packages.
That hasn't been too bad so far because we've stayed on the same 32-bit
image since 2017. Trying to move to a newer image revealed several
problems with the linux32 job:
- newer images complain about using "linux32 --32bit i386", due to
seccomp restrictions. We can loosen these with a docker option, but
I don't think running it is even doing anything. We use it only for
pretending to "apt" that we're on a 32-bit machine, but inside the
container image apt is already configured as a 32-bit system (even
though the kernel outside the container is obviously 64-bit). Using
the same apt invocation for both architectures just gets rid of this
call entirely.
- we set DEBIAN_FRONTEND to avoid hanging on packages that ask the
user questions. This wasn't a problem on the old image, but it is on
newer ones. The 64-bit stanza handles this already.
As a bonus, the 64-bit stanza uses "apt -q" instead of redirecting
output to /dev/null. This would have saved me a lot of debugging
time trying to figure out why it was hanging. :)
- the old image seems to have zlib-dev installed by default, but newer
ones do not.
In addition, there were probably many tests being skipped on the 32-bit
build because we didn't have support packages installed (e.g., gpg). Now
we'll run them.
We do need to keep some parts split off just for 64-bit systems: our p4
and lfs installs reference x86_64/amd64 binaries. The downloaded jgit
should work in theory, since it's just a jar file embedded in a shell
script that relies on the system java. But the system java in our image
is too old, so I've left it as 64-bit only for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Perforce tests have been updated.
* ps/p4-tests-updates:
t98xx: mark Perforce tests as memory-leak free
ci: update Perforce version to r23.2
t98xx: fix Perforce tests with p4d r23 and newer
|
|
Update our Perforce version from r21.2 to r23.2. Note that the updated
version is not the newest version. Instead, it is the last version where
the way that Perforce is being distributed remains the same as in r21.2.
Newer releases stopped distributing p4 and p4d executables as well as
the macOS archives directly and would thus require more work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't run style checks on our CI, even though we have a
'.clang-format' setup in the repository. Let's add one, the job will
validate only against the new commits added and will only run on merge
requests. Since we're introducing it for the first time, let's allow
this job to fail, so we can validate if this is useful and eventually
enforce it.
For GitHub, we allow the job to pass by adding 'continue-on-error: true'
to the workflow. This means the job would show as passed, even if the
style check failed. To know the status of the job, users have to
manually check the logs.
For GitLab, we allow the job to pass by adding 'allow_failure: true', to
the job. Unlike GitHub, here the job will show as failed with a yellow
warning symbol, but the pipeline would still show as passed.
Also for GitLab, we use the 'CI_MERGE_REQUEST_TARGET_BRANCH_SHA'
variable by default to obtain the base SHA of the merged pipeline (which
is only available for merged pipelines [1]). Otherwise we use the
'CI_MERGE_REQUEST_DIFF_BASE_SHA' variable.
[1]: https://docs.gitlab.com/ee/ci/variables/predefined_variables.html#predefined-variables-for-merge-request-pipelines
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "t/lib-terminal.sh", we declare a lazy prerequisite for tests that
require a TTY. The prerequisite uses a Perl script to figure out whether
we do have a usable TTY or not and thus implicitly depends on the PERL
prerequisite, as well. Furthermore though, the script requires another
dependency that is easy to miss, namely on the IO::Pty module. If that
module is not installed, then the script will exit early due to an
reason unrelated to missing TTYs.
This easily leads to missing test coverage. But most importantly, our CI
systems are missing this dependency and thus don't execute those tests
at all. Fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI fix.
* jk/ci-macos-gcc13-fix:
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
|
|
The last user of this variable went away in 4a6e4b9602 (CI: remove
Travis CI support, 2021-11-23), so it's doing nothing except making it
more confusing to find out which packages _are_ installed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have some tests in t5310 that use JGit to verify that bitmaps can be
read both by Git and by JGit. We do not execute these tests in our CI
jobs though because we don't make JGit available there. Consequently,
the tests basically bitrot because almost nobody is ever going to have
JGit in their path.
Install JGit to plug this test gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perforce binaries are only made executable for the current user. On
GitLab CI though we execute tests as a different user than "root", and
thus these binaries may not be executable by that test user at all. This
has gone unnoticed so far because those binaries are optional -- in case
they don't exist we simply skip over tests requiring them.
Fix the setup so that we set the executable bits for all users.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two different scripts which install dependencies, one for
dockerized jobs and one for non-dockerized ones. Naturally, these
scripts have quite some duplication. Furthermore, either of these
scripts is missing some test dependencies that the respective other
script has, thus reducing test coverage.
Merge those two scripts such that there is a single source of truth for
test dependencies, only.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're downloading various executables required by our tests. Each of
these executables goes into its own directory, which is then appended to
the PATH variable. Consequently, whenever we add a new dependency and
thus a new directory, we would have to adapt to this change in several
places.
Refactor this to instead put all binaries into a single directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to merge the "install-docker-dependencies.sh" script into
"install-dependencies.sh". This will also move our Alpine-based jobs
over to use the latter script. This script uses the Bash shell though,
which is not available by default on Alpine Linux.
Refactor "install-dependencies.sh" to use "/bin/sh" instead of Bash.
This requires us to get rid of the pushd/popd invocations, which are
replaced by some more elaborate commands that download or extract
executables right to where they are needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "linux-gcc-default" job installs common Ubuntu packages. This is
already done in the distro-specific switch, so we basically duplicate
the effort here.
Drop the duplicate package installations and inline the variable that
contains those common packages.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our "install-dependencies.sh" script is executed by non-dockerized jobs
to install dependencies. These jobs don't run with "root" permissions,
but with a separate user. Consequently, we need to use sudo(8) there to
elevate permissions when installing packages.
We're about to merge "install-docker-dependencies.sh" into that script
though, and our Docker containers do run as "root". Using sudo(8) is
thus unnecessary there, even though it would be harmless. On some images
like Alpine Linux though there is no sudo(8) available by default, which
would consequently break the build.
Adapt the script to make "sudo" a no-op when running as "root" user.
This allows us to easily reuse the script for our dockerized jobs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "runs_on_pool" environment variable is used by our CI scripts to
distinguish the different kinds of operating systems. It is quite
specific to GitHub Actions though and not really a descriptive name.
Rename the variable to "distro" to clarify its intent.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting up Perforce on macOS we put both `p4` and `p4d` into
"$HOME/bin". On GitHub CI this directory is indeed contained in the PATH
environment variable and thus there is no need for additional setup than
to put the binaries there. But GitLab CI does not do this, and thus our
Perforce-based tests would be skipped there even though we download the
binaries.
Refactor the setup code to become more robust by downloading binaries
into a separate directory which we then manually append to our PATH.
This matches what we do on Linux-based jobs.
Note that it may seem like we already did append "$HOME/bin" to PATH
because we're actually removing the lines that adapt PATH. But we only
ever adapted the PATH variable in "ci/install-dependencies.sh", and
didn't adapt it when running "ci/run-build-and-test.sh". Consequently,
the required binaries wouldn't be found during the test run unless the
CI platform already had the "$HOME/bin" in PATH right from the start.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
