| Age | Commit message (Collapse) | Author |
|---|
|
Various code clean-up around odb subsystem.
* ps/odb-cleanup:
odb: drop unneeded headers and forward decls
odb: rename `odb_has_object()` flags
odb: use enum for `odb_write_object` flags
odb: rename `odb_write_object()` flags
treewide: use enum for `odb_for_each_object()` flags
CodingGuidelines: document our style for flags
|
|
Rename `odb_has_object()` flags to be properly prefixed with the
function name.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsck subsystem relies on `the_repository` quite a bit. While we
could of course explicitly pass a repository down the callchain, we
already have a `struct fsck_options` that we pass to almost all
functions.
Extend the options to also store the repository to make it readily
available.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We initialize the `struct fsck_options` via a set of macros, often in
global scope. In the next commit though we're about to introduce a new
repository field to the options that must be initialized, and naturally
we don't have a repo other than `the_repository` available in this
scope.
Refactor the code to instead intrdouce a new `fsck_options_init()`
function that initializes the options for us and move initialization
into function scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two different ways to write an object into the database:
- We either provide the full buffer and write the object all at once.
- Or we provide an input stream that has a `read()` function so that
we can chunk the object.
The latter is especially used for large objects, where it may be too
expensive to hold the complete object in memory all at once.
While we already have `odb_write_object()` at the ODB-layer, we don't
have an equivalent for streaming an object. Introduce a new function
`odb_write_object_stream()` to address this gap so that callers don't
have to be aware of the inner workings of how to stream an object to
disk with a specific object source.
Rename `stream_loose_object()` to `odb_source_loose_write_stream()` to
clarify its scope. This matches our modern best practices around how to
name functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Transactions are managed via the {begin,end}_odb_transaction() function
in the object-file subsystem and its implementation is specific to the
files object source. Introduce odb_transaction_{begin,commit}() in the
odb subsystem to provide an eventual object source agnostic means to
manage transactions.
Update call sites to instead manage transactions through the odb
subsystem. Also rename {begin,end}_odb_transaction() functions to
object_file_transaction_{begin,commit}() to clarify the object source it
supports.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bulk-checkin subsystem provides various functions to manage ODB
transactions. Apart from {begin,end}_odb_transaction(), these functions
are only used by the object-file subsystem to manage aspects of a
transaction implementation specific to the files object source.
Relocate all the transaction code in bulk-checkin to object-file. This
simplifies the exposed transaction interface by reducing it to only
{begin,end}_odb_transaction(). Function and type names are adjusted in
the subsequent commit to better fit the new location.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Object database transactions in the bulk-checkin subsystem rely on
global state to track transaction status. Stop relying on global state
and instead store the transaction in the `struct object_database`.
Functions that operate on transactions are updated to now wire
transaction state.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce implicit assumption and dependence on the_repository in the
object-file subsystem.
* ps/object-file-wo-the-repository:
object-file: get rid of `the_repository` in index-related functions
object-file: get rid of `the_repository` in `force_object_loose()`
object-file: get rid of `the_repository` in `read_loose_object()`
object-file: get rid of `the_repository` in loose object iterators
object-file: remove declaration for `for_each_file_in_obj_subdir()`
object-file: inline `for_each_loose_file_in_objdir_buf()`
object-file: get rid of `the_repository` when writing objects
odb: introduce `odb_write_object()`
loose: write loose objects map via their source
object-file: get rid of `the_repository` in `finalize_object_file()`
object-file: get rid of `the_repository` in `loose_object_info()`
object-file: get rid of `the_repository` when freshening objects
object-file: inline `check_and_freshen()` functions
object-file: get rid of `the_repository` in `has_loose_object()`
object-file: stop using `the_hash_algo`
object-file: fix -Wsign-compare warnings
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic that writes loose objects still relies on `the_repository` to
decide where exactly the object shall be written to. Refactor it so that
the logic instead operates on a `struct odb_source` so that we can get
rid of this global dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not have a backend-agnostic way to write objects into an object
database. While there is `write_object_file()`, this function is rather
specific to the loose object format.
Introduce `odb_write_object()` to plug this gap. For now, this function
is a simple wrapper around `write_object_file()` and doesn't even use
the passed-in object database yet. This will change in subsequent
commits, where `write_object_file()` is converted so that it works on
top of an `odb_source`. `odb_write_object()` will then become
responsible for deciding which source an object shall be written to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `has_object()` to `odb_has_object()` to match other functions
related to the object database and our modern coding guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `repo_read_object_file()` to `odb_read_object()` to match other
functions related to the object database and our modern coding
guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the comment of `repo_has_object_file()` and its `_with_flags()`
variant tells us, these functions are considered to be deprecated in
favor of `has_object()`. There are a couple of slight benefits in favor
of the replacement:
- The new function has a short-and-sweet name.
- More explicit defaults: `has_object()` doesn't fetch missing objects
via promisor remotes, and neither does it reload packfiles if an
object wasn't found by default. This ensures that it becomes
immediately obvious when a simple object existence check may result
in expensive actions.
Most importantly though, it is confusing that we have two sets of
functions that ultimately do the same thing, but with different
defaults.
Start sunsetting `repo_has_object_file()` and its `_with_flags()`
sibling by replacing all callsites with `has_object()`:
- `repo_has_object_file(...)` is equivalent to
`has_object(..., HAS_OBJECT_RECHECK_PACKED | HAS_OBJECT_FETCH_PROMISOR)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK | OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., 0)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., HAS_OBJECT_RECHECK_PACKED)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK)`
is equivalent to `has_object(..., HAS_OBJECT_FETCH_PROMISOR)`.
The replacements should be functionally equivalent.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we have the "object-store.h" header, most of the functionality for
object stores is actually hosted in "object-file.c". This makes it hard
to find relevant functions and causes us to mix up concerns.
Split out functions relating to the object store subsystem into a new
"object-store.c" file.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/object-wo-the-repository:
hash: stop depending on `the_repository` in `null_oid()`
hash: fix "-Wsign-compare" warnings
object-file: split out logic regarding hash algorithms
delta-islands: stop depending on `the_repository`
object-file-convert: stop depending on `the_repository`
pack-bitmap-write: stop depending on `the_repository`
pack-revindex: stop depending on `the_repository`
pack-check: stop depending on `the_repository`
environment: move access to "core.bigFileThreshold" into repo settings
pack-write: stop depending on `the_repository` and `the_hash_algo`
object: stop depending on `the_repository`
csum-file: stop depending on `the_repository`
|
|
Commit 0578f1e66a ("global: adapt callers to use generic hash context helpers")
accidentally removed `->init_fn`, which is required for OpenSSL 3+ SHA1.
This fixes the following error on fetch:
fatal: fetch-pack: invalid index-pack output
Signed-off-by: Jensen Huang <hmz007@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "core.bigFileThreshold" setting is stored in a global variable and
populated via `git_default_core_config()`. This may cause issues in
the case where one is handling multiple different repositories in a
single process with different values for that config key, as we may or
may not see the correct value in that case. Furthermore, global state
blocks our path towards libification.
Refactor the code so that we instead store the value in `struct
repo_settings`, where the value is computed as-needed and cached.
Note that this change requires us to adapt one test in t1050 that
verifies that we die when parsing an invalid "core.bigFileThreshold"
value. The exercised Git command doesn't use the value at all, and thus
it won't hit the new code path that parses the value. This is addressed
by using git-hash-object(1) instead, which does read the value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adapt callers to use generic hash context helpers instead of using the
hash algorithm to update them. This makes the callsites easier to reason
about and removes the possibility that the wrong hash algorithm is used
to update the hash context's state. And as a nice side effect this also
gets rid of a bunch of users of `the_hash_algo`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We generally avoid using `typedef` in the Git codebase. One exception
though is the `git_hash_ctx`, likely because it used to be a union
rather than a struct until the preceding commit refactored it. But now
that it is a normal `struct` there isn't really a need for a typedef
anymore.
Drop the typedef and adapt all callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was possible for "git unpack-objects" and "git index-pack" to
make an unaligned access, which has been corrected.
* jk/pack-header-parse-alignment-fix:
index-pack, unpack-objects: use skip_prefix to avoid magic number
index-pack, unpack-objects: use get_be32() for reading pack header
parse_pack_header_option(): avoid unaligned memory writes
packfile: factor out --pack_header argument parsing
bswap.h: squelch potential sparse -Wcast-truncate warnings
|
|
The help text from "git $cmd -h" appear on the standard output for
some $cmd and the standard error for others. The built-in commands
have been fixed to show them on the standard output consistently.
* jc/show-usage-help:
builtin: send usage() help text to standard output
oddballs: send usage() help text to standard output
builtins: send usage_with_options() help text to standard output
usage: add show_usage_if_asked()
parse-options: add show_usage_with_options_if_asked()
t0012: optionally check that "-h" output goes to stdout
|
|
When parsing --pack_header=, we manually skip 14 bytes to the data.
Let's use skip_prefix() to do this automatically.
Note that we overwrite our pointer to the front of the string, so we
have to add more context to the error message. We could avoid this by
declaring an extra pointer to hold the value, but I think the modified
message is actually preferable; it should give translators a bit more
context.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both of these commands read the incoming pack into a static unsigned
char buffer in BSS, and then parse it by casting the start of the buffer
to a struct pack_header. This can result in SIGBUS on some platforms if
the compiler doesn't place the buffer in a position that is properly
aligned for 4-byte integers.
This reportedly happens with unpack-objects (but not index-pack) on
sparc64 when compiled with clang (but not gcc). But we are definitely in
the wrong in both spots; since the buffer's type is unsigned char, we
can't depend on larger alignment. When it works it is only because we
are lucky.
We'll fix this by switching to get_be32() to read the headers (just like
the last few commits similarly switched us to put_be32() for writing
into the same buffer).
It would be nice to factor this out into a common helper function, but
the interface ends up quite awkward. Either the caller needs to hardcode
how many bytes we'll need, or it needs to pass us its fill()/use()
functions as pointers. So I've just fixed both spots in the same way;
this is not code that is likely to be repeated a third time (most of the
pack reading code uses an mmap'd buffer, which should be properly
aligned).
I did make one tweak to the shared code: our pack_version_ok() macro
expects us to pass the big-endian value we'd get by casting. We can
introduce a "native" variant which uses the host integer ordering.
Reported-by: Koakuma <koachan@protonmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both index-pack and unpack-objects accept a --pack_header argument. This
is an undocumented internal argument used by receive-pack and fetch to
pass along information about the header of the pack, which they've
already read from the incoming stream.
In preparation for a bugfix, let's factor the duplicated code into a
common helper.
The callers are still responsible for identifying the option. While this
could likewise be factored out, it is more flexible this way (e.g., if
they ever started using parse-options and wanted to handle both the
stuck and unstuck forms).
Likewise, the callers are responsible for reporting errors, though they
both just call die(). I've tweaked unpack-objects to match index-pack in
marking the error for translation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the show_usage_and_exit_if_asked() helper we introduced
earlier, fix callers of usage() that want to show the help text when
explicitly asked by the end-user. The help text now goes to the
standard output stream for them.
These are the bog standard "if we got only '-h', then that is a
request for help" callers. Their
if (argc == 2 && !strcmp(argv[1], "-h"))
usage(message);
are simply replaced with
show_usage_and_exit_if_asked(argc, argv, message);
With this, the built-ins tested by t0012 all send their help text to
their standard output stream, so the check in t0012 that was half
tightened earlier is now fully tightened to insist on standard error
stream being empty.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "progress" subsystem by passing in a
repository when initializing `struct progress`. Furthermore, store a
pointer to the repository in that struct so that we can pass it to the
trace2 API when logging information.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many of our hash functions have two variants, one receiving a `struct
git_hash_algo` and one that derives it via `the_repository`. Adapt all
of those functions to always require the hash algorithm as input and
drop the variants that do not accept one.
As those functions are now independent of `the_repository`, we can move
them from "hash.h" to "hash-ll.h".
Note that both in this and subsequent commits in this series we always
just pass `the_repository->hash_algo` as input even if it is obvious
that there is a repository in the context that we should be using the
hash from instead. This is done to be on the safe side and not introduce
any regressions. All callsites should eventually be amended to use a
repo passed via parameters, but this is outside the scope of this patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two packfile stream consumers, index-pack and
unpack-objects, that allow excess payload after the packfile stream
data. Their code to relay excess data hasn't changed significantly
since their original implementation that appeared in 67e5a5ec
(git-unpack-objects: re-write to read from stdin, 2005-06-28) and
9bee2478 (mimic unpack-objects when --stdin is used with index-pack,
2006-10-25).
These code blocks contain hand-rolled loops using xwrite(), written
before our write_in_full() helper existed. This helper now provides
the same functionality.
Replace these loops with write_in_full() for shorter, clearer
code. Update related variables accordingly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix-up new-ish code to support OpenSSL EVP API.
* ew/hash-with-openssl-evp:
treewide: fix various bugs w/ OpenSSL 3+ EVP API
|
|
The OpenSSL 3+ EVP API for SHA-* cannot support our prior use cases
supported by other SHA-* implementations. It has the following
differences:
1. ->init_fn is required before all use
2. struct assignments don't work and requires ->clone_fn
3. can't support ->update_fn after ->final_*fn
While fixing cases 1 and 2 is merely the matter of calling ->init_fn and
->clone_fn as appropriate, fixing case 3 requires calling ->final_*fn on
a temporary context that's cloned from the primary context.
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/ZPCL11k38PXTkFga@debian.me/
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Fixes: 3e440ea0aba0 ("sha256: avoid functions deprecated in OpenSSL 3+")
Fixes: bda9c12073e7 ("avoid SHA-1 functions deprecated in OpenSSL 3+")
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
|
|
There are a few callback functions which are used with the fsck code,
but it's natural that not all callbacks need all parameters. For
reporting, even something as obvious as "the oid of the object which had
a problem" is not always used, as some callers are only checking a
single object in the first place. And for both reporting and walking,
things like void data pointers and the fsck_options aren't always
necessary.
But since each such parameter is used by _some_ callback, we have to
keep them in the interface. Mark the unused ones in specific callbacks
to avoid triggering -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While functions like starts_with() probably should not belong in the
boundaries of the strbuf library, this commit focuses on first splitting
out headers from git-compat-util.h.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
|
|
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several builtins depend on being able to disable the replace references
so we actually operate on each object individually. These currently do
so by directly mutating the 'read_replace_refs' global.
A future change will move this global into a different place, so it will
be necessary to change all of these lines. However, we can simplify that
transition by abstracting the purpose of these global assignments with a
method call.
We will need to keep this read_replace_refs global forever, as we want
to make sure that we never use replace refs throughout the life of the
process if this method is called. Future changes may present a
repository-scoped version of the variable to represent that repository's
core.useReplaceRefs config value, but a zero-valued read_replace_refs
will always override such a setting.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
|
|
Move functions from cache.h for zlib.c into a new header file. Since
adding a "zlib.h" would cause issues with the real zlib, rename zlib.c
to git-zlib.c while we are at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
