| Age | Commit message (Collapse) | Author |
|---|
|
The config value `branch.autoSetupMerge` is parsed in
`git_default_branch_config()` and stored in the global variable
`git_branch_track`. This global variable can be overwritten
by another repository when multiple Git repos run in the the same process.
Move this value into `struct repo_config_values` in the_repository to
retain current behaviours and move towards libifying Git.
Since the variable is no longer a global variable, it has been renamed to
`branch_track` in the struct `repo_config_values`.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We traditionally used "int" to store and pass around the values defined
by "enum git_colorbool" (which were originally just #define macros).
Using an int doesn't produce incorrect results, but using the actual
enum makes the intent of the code more clear.
It would be nice if the compiler could catch cases where we used the
enum and an int interchangeably, since it's very easy to accidentally
check the boolean true/false of a colorbool like:
if (branch_use_color)
This is wrong because GIT_COLOR_UNKNOWN and GIT_COLOR_AUTO evaluate to
true in C, even though we may ultimately decide not to use color. But C
is pretty happy to convert between ints and enums (even with various
-Wenum-* warnings). So this sadly doesn't protect us from such mistakes,
but it hopefully does make the code easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename functions related to handling refspecs in preparation for their
move from `remote.c` to `refspec.c`. Update their names to better
reflect their intent:
- `query_refspecs()` -> `refspec_find_match()` for clarity, as it
finds a single matching refspec.
- `query_refspecs_multiple()` -> `refspec_find_all_matches()` to
better reflect that it collects all matching refspecs instead of
returning just the first match.
- `query_matches_negative_refspec()` ->
`refspec_find_negative_match()` for consistency with the
updated naming convention, even though this static function
didn't strictly require renaming.
Signed-off-by: Meet Soni <meetsoni3017@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a bunch of loops which iterate up to an unsigned boundary using
a signed index, which generates warnigs because we compare a signed and
unsigned value in the loop condition. Address these sites for trivial
cases and enable `-Wsign-compare` warnings for these code units.
This patch only adapts those code units where we can drop the
`DISABLE_SIGN_COMPARE_WARNINGS` macro in the same step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the `parse_transport_option()` method to parse the `push.pushOption`
configuration. This method will also be used in the next commit to
handle the new `remote.<name>.serverOption` configuration for setting
server options in Git protocol v2.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The send-pack --force-with-lease option populates a push_cas_option
struct with allocated strings. Exiting without cleaning this up will
cause leak-checkers to complain.
We can fix this by calling clear_cas_option(), after making it publicly
available. Previously it was used only for resetting the list when we
saw --no-force-with-lease.
The git-push command has the same "leak", though in this case it won't
trigger a leak-checker since it stores the push_cas_option struct as a
global rather than on the stack (and is thus reachable even after main()
exits). I've added cleanup for it here anyway, though, as
future-proofing.
The leak is triggered by t5541 (it tests --force-with-lease over http,
which requires a separate send-pack process under the hood), but we
can't mark it as leak-free yet.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When appending a refspec via `refspec_append_mapped()` we leak the
result of `query_refspecs()`. The overall logic around refspec queries
is quite weird, as callers are expected to either set the `src` or `dst`
pointers, and then the (allocated) result will be in the respective
other struct member.
As we have the `src` member set, plugging the memory leak is thus as
easy as just freeing the `dst` member. While at it, use designated
initializers to initialize the structure.
This leak was exposed by t5516, but fixing it is not sufficient to make
the whole test suite leak free.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an end-user runs "git push" with an empty string for the remote
repository name, e.g.
$ git push '' main
"git push" fails with a BUG(). Even though this is a nonsense request
that we want to fail, we shouldn't hit a BUG(). Instead we want to give
a sensible error message, e.g., 'bad repository'".
This is because since 9badf97c42 (remote: allow resetting url list,
2024-06-14), we reset the remote URL if the provided URL is empty. When
a user of 'remotes_remote_get' tries to fetch a remote with an empty
repo name, the function initializes the remote via 'make_remote'. But
the remote is still not a valid remote, since the URL is empty, so it
tries to add the URL alias using 'add_url_alias'. This in-turn will call
'add_url', but since the URL is empty we call 'strvec_clear' on the
`remote->url`. Back in 'remotes_remote_get', we again check if the
remote is valid, which fails, so we return 'NULL' for the 'struct
remote *' value.
The 'builtin/push.c' code, calls 'set_refspecs' before validating the
remote. This worked with empty repo names earlier since we would get a
remote, albeit with an empty URL. With the new changes, we get a 'NULL'
remote value, this causes the check for remote to fail and raises the
BUG in 'set_refspecs'.
Do a simple fix by doing remote validation first. Also add a test to
validate the bug fix. With this, we can also now directly pass remote to
'set_refspecs' instead of it trying to lazily obtain it.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the previous commit removed the possibility that a "struct
remote" will ever have zero url fields, we can drop a number of
redundant checks and untriggerable code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to know the push urls for a remote, there is some simple
logic:
- if the user configured any remote.*.pushurl keys, then those make
the complete set of push urls
- otherwise we push to all urls in remote.*.url
Many spots implement this with a level of indirection, assigning to a
local url/url_nr pair. But since both arrays are now strvecs, we can
just use a pointer to select the appropriate strvec, shortening the code
a bit.
Even though this is now a one-liner, since it is application logic that
is present in so many places, it's worth abstracting a helper function.
In fact, we already have such a function, but it's local to
builtin/push.c. So we'll just make it available everywhere via remote.h.
There are two spots to pay special attention to here:
1. in builtin/remote.c's get_url(), we are selecting first based on
push_mode and then falling back to "url" when we're in push_mode
but no pushurl is defined. The updated code makes that much more
clear, compared to the original which had an "else" fall-through.
2. likewise in that file's set_url(), we _only_ respect push_mode,
sine the point is that we are adding to pushurl in that case
(whether it is empty or not). And thus it does not use our helper
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the url/pushurl fields of "struct remote" own their strings, we
can switch from bare arrays to strvecs. This has a few advantages:
- push/clear are now one-liners
- likewise the free+assigns in alias_all_urls() can use
strvec_replace()
- we now use size_t for storage, avoiding possible overflow
- this will enable some further cleanups in future patches
There's quite a bit of fallout in the code that reads these fields, as
it tends to access these arrays directly. But it's mostly a mechanical
replacement of "url_nr" with "url.nr", and "url[i]" with "url.v[i]",
with a few variations (e.g. "*url" could become "*url.v", but I used
"url.v[0]" for consistency).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Code clean-up.
* jc/retire-cas-opt-name-constant:
remote.h: retire CAS_OPT_NAME
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around use of configuration variables.
* jk/config-cleanup:
sequencer: simplify away extra git_config_string() call
gpg-interface: drop pointless config_error_nonbool() checks
push: drop confusing configset/callback redundancy
config: use git_config_string() for core.checkRoundTripEncoding
diff: give more detailed messages for bogus diff.* config
config: use config_error_nonbool() instead of custom messages
imap-send: don't use git_die_config() inside callback
git_xmerge_config(): prefer error() to die()
config: reject bogus values for core.checkstat
|
|
When the "--force-with-lease" option was introduced in 28f5d176
(remote.c: add command line option parser for "--force-with-lease",
2013-07-08), the design discussion revolved around the concept of
"compare-and-swap", and it can still be seen in the name used for
variables and helper functions. The end-user facing option name
ended up to be a bit different, so during the development iteration
of the feature, we used this C preprocessor macro to make it easier
to rename it later.
All of that happened more than 10 years ago, and the flexibility
afforded by the CAS_OPT_NAME macro outlived its usefulness. Inline
the constant string for the option name, like all other option names
in the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We parse push config by calling git_config() with our git_push_config()
callback. But inside that callback, when we see "push.gpgsign", we
ignore the value passed into the callback and instead make a new call to
git_config_get_value().
This is unnecessary at best, and slightly wrong at worst (if there are
multiple instances, get_value() only returns one; both methods end up
with last-one-wins, but we'd fail to report errors if earlier
incarnations were bogus).
The call was added by 68c757f219 (push: add a config option push.gpgSign
for default signed pushes, 2015-08-19). That commit doesn't give any
reason to deviate from the usual strategy here; it was probably just
somebody unfamiliar with our config API and its conventions.
It also added identical code to builtin/send-pack.c, which also handles
push.gpgsign.
And then the same issue spread to its neighbor in b33a15b081 (push: add
recurseSubmodules config option, 2015-11-17), presumably via
cargo-culting.
This patch fixes all three to just directly use the value provided to
the callback. While I was adjusting the code to do so, I noticed that
push.gpgsign is overly careful about a NULL value. After
git_parse_maybe_bool() has returned anything besides 1, we know that the
value cannot be NULL (if it were, it would be an implicit "true", and
many callers of maybe_bool rely on that). Here that lets us shorten "if
(v && !strcasecmp(v, ...))" to just "if (!strcasecmp(v, ...))".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The push option --delete is incompatible with --all, --mirror, and
--tags; --tags is incompatible with --all and --mirror; --all is
incompatible with --mirror. This means they are all incompatible with
each other. And --branches is an alias for --all.
Use the function for checking four mutually incompatible options,
die_for_incompatible_opt4(), to perform this check in one place and
without repetition. This is shorter and clearer.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fixes.
* jc/transport-parseopt-fix:
fetch: reject --no-ipv[46]
parse-options: introduce OPT_IPVERSION()
|
|
Help newbies by suggesting that there are cases where force-pushing
is a valid and sensible thing to update a branch at a remote
repository, rather than reconciling with merge/rebase.
* ah/advise-force-pushing:
push: don't imply that integration is always required before pushing
remote: don't imply that integration is always required before pushing
wt-status: don't show divergence advice when committing
|
|
The command line option parsing for "git clone", "git fetch", and
"git push" have duplicated implementations of parsing "--ipv4" and
"--ipv6" options, by having two OPT_SET_INT() for "ipv4" and "ipv6".
Introduce a new OPT_IPVERSION() macro and use it in these three
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a narrow but common case, the user is the only author of a branch and
doesn't mind overwriting the corresponding branch on the remote. This
workflow is especially common on GitHub, GitLab, and Gerrit, which keep
a permanent record of every version of a branch that is pushed while a
pull request is open for that branch. On those platforms, force-pushing
is encouraged and is analogous to emailing a new version of a patchset.
When giving advice about divergent branches, tell the user about
`git pull`, but don't unconditionally instruct the user to do it. A less
prescriptive message will help prevent users from thinking that they are
required to create an integrated history instead of simply replacing the
previous history. Also, don't put `git pull` in an awkward
parenthetical, because `git pull` can always be used to reconcile
branches and is the normal way to do so.
Due to the difficulty of knowing which command for force-pushing is best
suited to the user's situation, no specific advice is given about
force-pushing. Instead, the user is directed to the Git documentation to
read about possible ways forward that do not involve integration.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --all" gained an alias "git push --branches".
* tl/push-branches-is-an-alias-for-all:
t5583: fix shebang line
push: introduce '--branches' option
|
|
The '--all' option of git-push built-in cmd support to push all branches
(refs under refs/heads) to remote. Under the usage, a user can easlily
work in some scenarios, for example, branches synchronization and batch
upload.
The '--all' was introduced for a long time, meanwhile, git supports to
customize the storage location under "refs/". when a new git user see
the usage like, 'git push origin --all', we might feel like we're
pushing _all_ the refs instead of just branches without looking at the
documents until we found the related description of it or '--mirror'.
To ensure compatibility, we cannot rename '--all' to another name
directly, one way is, we can try to add a new option '--heads' which be
identical with the functionality of '--all' to let the user understand
the meaning of representation more clearly. Actually, We've more or less
named options this way already, for example, in 'git-show-ref' and 'git
ls-remote'.
At the same time, we fix a related issue about the wrong help
information of '--all' option in code and add some test cases in
t5523, t5543 and t5583.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of forcing each command to choose to honor GPG related
configuration variables, make the subsystem lazily initialize
itself.
* jc/gpg-lazy-init:
drop pure pass-through config callbacks
gpg-interface: lazily initialize and read the configuration
|
|
Instead of forcing the porcelain commands to always read the
configuration variables related to the signing and verifying
signatures, lazily initialize the necessary subsystem on demand upon
the first use.
This hopefully would make it more future-proof as we do not have to
think and decide whether we should call git_gpg_config() in the
git_config() callback for each command.
A few git_config() callback functions that used to be custom
callbacks are now just a thin wrapper around git_default_config().
We could further remove, git_FOO_config and replace calls to
git_config(git_FOO_config) with git_config(git_default_config), but
to make it clear which ones are affected and the effect is only the
removal of git_gpg_config(), it is vastly preferred not to do such a
change in this step (they can be done on top once the dust settled).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak that's been with us since this code was added in
ca02465b413 (push: use remote.$name.push as a refmap, 2013-12-03).
The "remote = remote_get(...)" added in the same commit would seem to
leak based only on the context here, but that function is a wrapper
for sticking the remotes we fetch into "the_repository->remote_state".
See fd3cb0501e1 (remote: move static variables into per-repository
struct, 2021-11-17) for the addition of code in repository.c that
free's the "remote" allocated here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set_refspecs() caller of refspec_append_mapped() (added in [1])
left open the question[2] of whether the "remote" we lazily fetch
might be NULL in the "[...]uniquely name our ref?" case, as
remote_get() can return NULL.
If we got past the "[...]uniquely name our ref?" case we'd have
already segfaulted if we tried to dereference it as
"remote->push.nr". In these cases the config mechanism & previous
remote validation will have bailed out earlier.
Let's refactor this code to clarify that, we'll now BUG() out if we
can't get a "remote", and will no longer retrieve it for these common
cases where we don't need it.
1. ca02465b413 (push: use remote.$name.push as a refmap, 2013-12-03)
2. https://lore.kernel.org/git/c0c07b89-7eaf-21cd-748e-e14ea57f09fd@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git learned pushing submodules without pushing the superproject by
the user specifying --recurse-submodules=only through 6c656c3fe4
("submodules: add RECURSE_SUBMODULES_ONLY value", 2016-12-20) and
225e8bf778 ("push: add option to push only submodules", 2016-12-20).
For users who use this feature regularly, it is desirable to have an
equivalent configuration.
It turns out that such a configuration (push.recurseSubmodules=only) is
already supported, even though it is neither documented nor mentioned
in the commit messages, due to the way the --recurse-submodules=only
feature was implemented (a function used to parse --recurse-submodules
was updated to support "only", but that same function is used to parse
push.recurseSubmodules too). What is left is to document it and test it,
which is what this commit does.
There is a possible point of confusion when recursing into a submodule
that itself has the push.recurseSubmodules=only configuration, because
if a repository has only its submodules pushed and not itself, its
superproject can never be pushed. Therefore, treat such configurations
as being "on-demand", and print a warning message.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
"upstream branches" is plural but "name" and "local branch" are
singular. Make them all singular. And because we're talking about a
hypothetical branch that doesn't exist yet, use the future tense.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was found during l10n process by Jiang Xin.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some "simple" centralized workflows, users expect remote tracking
branch names to match local branch names. "git push" pushes to the
remote version/instance of the branch, and "git pull" pulls any changes
to the remote branch (changes made by the same user in another place, or
by other users).
This expectation is supported by the push.default default option "simple"
which refuses a default push for a mismatching tracking branch name, and
by the new branch.autosetupmerge option, "simple", which only sets up
remote tracking for same-name remote branches.
When a new branch has been created by the user and has not yet been
pushed (and push.default is not set to "current"), the user is prompted
with a "The current branch %s has no upstream branch" error, and
instructions on how to push and add tracking.
This error is helpful in that following the advice once per branch
"resolves" the issue for that branch forever, but inconvenient in that
for the "simple" centralized workflow, this is always the right thing to
do, so it would be better to just do it.
Support this workflow with a new config setting, push.autoSetupRemote,
which will cause a default push, when there is no remote tracking branch
configured, to push to the same-name on the remote and --set-upstream.
Also add a hint offering this new option when the "The current branch %s
has no upstream branch" error is encountered, and add corresponding tests.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the default push.default option, "simple", beginners are
protected from accidentally pushing to the "wrong" branch in
centralized workflows: if the remote tracking branch they would push
to does not have the same name as the local branch, and they try to do
a "default push", they get an error and explanation with options.
There is a particular centralized workflow where this often happens:
a user branches to a new local topic branch from an existing
remote branch, eg with "checkout -b feature1 origin/master". With
the default branch.autosetupmerge configuration (value "true"), git
will automatically add origin/master as the upstream tracking branch.
When the user pushes with a default "git push", with the intention of
pushing their (new) topic branch to the remote, they get an error, and
(amongst other things) a suggestion to run "git push origin HEAD".
If they follow this suggestion the push succeeds, but on subsequent
default pushes they continue to get an error - so eventually they
figure out to add "-u" to change the tracking branch, or they spelunk
the push.default config doc as proposed and set it to "current", or
some GUI tooling does one or the other of these things for them.
When one of their coworkers later works on the same topic branch,
they don't get any of that "weirdness". They just "git checkout
feature1" and everything works exactly as they expect, with the shared
remote branch set up as remote tracking branch, and push and pull
working out of the box.
The "stable state" for this way of working is that local branches have
the same-name remote tracking branch (origin/feature1 in this
example), and multiple people can work on that remote feature branch
at the same time, trusting "git pull" to merge or rebase as required
for them to be able to push their interim changes to that same feature
branch on that same remote.
(merging from the upstream "master" branch, and merging back to it,
are separate more involved processes in this flow).
There is a problem in this flow/way of working, however, which is that
the first user, when they first branched from origin/master, ended up
with the "wrong" remote tracking branch (different from the stable
state). For a while, before they pushed (and maybe longer, if they
don't use -u/--set-upstream), their "git pull" wasn't getting other
users' changes to the feature branch - it was getting any changes from
the remote "master" branch instead (a completely different class of
changes!)
An experienced git user might say "well yeah, that's what it means to
have the remote tracking branch set to origin/master!" - but the
original user above didn't *ask* to have the remote master branch
added as remote tracking branch - that just happened automatically
when they branched their feature branch. They didn't necessarily even
notice or understand the meaning of the "set up to track 'origin/master'"
message when they created the branch - especially if they are using a
GUI.
Looking at how to fix this, you might think "OK, so disable auto setup
of remote tracking - set branch.autosetupmerge to false" - but that
will inconvenience the *second* user in this story - the one who just
wanted to start working on the topic branch. The first and second
users swap roles at different points in time of course - they should
both have a sane configuration that does the right thing in both
situations.
Make this "branches have the same name locally as on the remote"
workflow less painful / more obvious by introducing a new
branch.autosetupmerge option called "simple", to match the same-name
"push.default" option that makes similar assumptions.
This new option automatically sets up tracking in a *subset* of the
current default situations: when the original ref is a remote tracking
branch *and* has the same branch name on the remote (as the new local
branch name).
Update the error displayed when the 'push.default=simple' configuration
rejects a mismatching-upstream-name default push, to offer this new
branch.autosetupmerge option that will prevent this class of error.
With this new configuration, in the example situation above, the first
user does *not* get origin/master set up as the tracking branch for
the new local branch. If they "git pull" in their new local-only
branch, they get an error explaining there is no upstream branch -
which makes sense and is helpful. If they "git push", they get an
error explaining how to push *and* suggesting they specify
--set-upstream - which is exactly the right thing to do for them.
This new option is likely not appropriate for users intentionally
implementing a "triangular workflow" with a shared upstream tracking
branch, that they "git pull" in and a "private" feature branch that
they push/force-push to just for remote safe-keeping until they are
ready to push up to the shared branch explicitly/separately. Such
users are likely to prefer keeping the current default
merge.autosetupmerge=true behavior, and change their push.default to
"current".
Also extend the existing branch tests with three new cases testing
this option - the obvious matching-name and non-matching-name cases,
and also a non-matching-ref-type case. The matching-name case needs to
temporarily create an independent repo to fetch from, as the general
strategy of using the local repo as the remote in these tests
precludes locally branching with the same name as in the "remote".
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the same message when an invalid value is passed to a command line
option or a configuration variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
