| Age | Commit message (Collapse) | Author |
|---|
|
The logic to count objects has been cleaned up.
* ps/object-counting:
odb: introduce generic object counting
odb/source: introduce generic object counting
object-file: generalize counting objects
object-file: extract logic to approximate object count
packfile: extract logic to count number of objects
odb: stop including "odb/source.h"
|
|
The "odb.h" header currently includes the "odb/source.h" file. This is
somewhat roundabout though: most callers shouldn't have to care about
the `struct odb_source`, but should rather use the ODB-level functions.
Furthermore, it means that a couple of definitions have to live on the
source level even though they should be part of the generic interface.
Reverse the relation between "odb/source.h" and "odb.h" and move the
enums and typedefs that relate to the generic interfaces back into
"odb.h". Add the necessary includes to all files that rely on the
transitive include.
Suggested-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable callers to generate reachability bitmaps when performing MIDX
layer compaction by combining all existing bitmaps from the compacted
layers.
Note that because of the object/pack ordering described by the previous
commit, the pseudo-pack order for the compacted MIDX is the same as
concatenating the individual pseudo-pack orderings for each layer in the
compaction range.
As a result, the only non-test or documentation change necessary is to
treat all objects as non-preferred during compaction so as not to
disturb the object ordering.
In the future, we may want to adjust which commit(s) receive
reachability bitmaps when compacting multiple .bitmap files into one, or
even generate new bitmaps (e.g., if the references have moved
significantly since the .bitmap was generated). This commit only
implements combining all existing bitmaps in range together in order to
demonstrate and lay the groundwork for more exotic strategies.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When managing a MIDX chain with many layers, it is convenient to combine
a sequence of adjacent layers into a single layer to prevent the chain
from growing too long.
While it is conceptually possible to "compact" a sequence of MIDX layers
together by running "git multi-pack-index write --stdin-packs", there
are a few drawbacks that make this less than desirable:
- Preserving the MIDX chain is impossible, since there is no way to
write a MIDX layer that contains objects or packs found in an earlier
MIDX layer already part of the chain. So callers would have to write
an entirely new (non-incremental) MIDX containing only the compacted
layers, discarding all other objects/packs from the MIDX.
- There is (currently) no way to write a MIDX layer outside of the MIDX
chain to work around the above, such that the MIDX chain could be
reassembled substituting the compacted layers with the MIDX that was
written.
- The `--stdin-packs` command-line option does not allow us to specify
the order of packs as they appear in the MIDX. Therefore, even if
there were workarounds for the previous two challenges, any bitmaps
belonging to layers which come after the compacted layer(s) would no
longer be valid.
This commit introduces a way to compact a sequence of adjacent MIDX
layers into a single layer while preserving the MIDX chain, as well as
any bitmap(s) in layers which are newer than the compacted ones.
Implementing MIDX compaction does not require a significant number of
changes to how MIDX layers are written. The main changes are as follows:
- Instead of calling `fill_packs_from_midx()`, we call a new function
`fill_packs_from_midx_range()`, which walks backwards along the
portion of the MIDX chain which we are compacting, and adds packs one
layer a time.
In order to preserve the pseudo-pack order, the concatenated pack
order is preserved, with the exception of preferred packs which are
always added first.
- After adding entries from the set of packs in the compaction range,
`compute_sorted_entries()` must adjust the `pack_int_id`'s for all
objects added in each fanout layer to match their original
`pack_int_id`'s (as opposed to the index at which each pack appears
in `ctx.info`).
Note that we cannot reuse `midx_fanout_add_midx_fanout()` directly
here, as it unconditionally recurs through the `->base_midx`. Factor
out a `_1()` variant that operates on a single layer, reimplement
the existing function in terms of it, and use the new variant from
`midx_fanout_add_compact()`.
Since we are sorting the list of objects ourselves, the order we add
them in does not matter.
- When writing out the new 'multi-pack-index-chain' file, discard any
layers in the compaction range, replacing them with the newly written
layer, instead of keeping them and placing the new layer at the end
of the chain.
This ends up being sufficient to implement MIDX compaction in such a way
that preserves bitmaps corresponding to more recent layers in the MIDX
chain.
The tests for MIDX compaction are so far fairly spartan, since the main
interesting behavior here is ensuring that the right packs/objects are
selected from each layer, and that the pack order is preserved despite
whether or not they are sorted in lexicographic order in the original
MIDX chain.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since c39fffc1c90 (tests: start asserting that *.txt SYNOPSIS matches -h
output, 2022-10-13), the manual page for 'git multi-pack-index' has a
SYNOPSIS section which differs from 'git multi-pack-index -h'.
Correct this while also documenting additional options accepted by the
'write' sub-command.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All multi-pack-index sub-commands (write, verify, repack, and expire)
support a '--progress' command-line option, despite not listing it as
one of the common options in `common_opts`.
As a result each sub-command declares its own `OPT_BIT()` for a
"--progress" command-line option. Centralize this within the
`common_opts` to avoid re-declaring it in each sub-command.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further code clean-up for multi-pack-index code paths.
* ps/object-store-midx-dedup-info:
midx: compute paths via their source
midx: stop duplicating info redundant with its owning source
midx: write multi-pack indices via their source
midx: load multi-pack indices via their source
midx: drop redundant `struct repository` parameter
odb: simplify calling `link_alt_odb_entry()`
odb: return newly created in-memory sources
odb: consistently use "dir" to refer to alternate's directory
odb: allow `odb_find_source()` to fail
odb: store locality in object database sources
|
|
Similar to the preceding commit, refactor the writing side of multi-pack
indices so that we pass in the object database source where the index
should be written to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To load a multi-pack index the caller is expected to pass both the
repository and the object directory where the multi-pack index is
located. While this works, this layout has a couple of downsides:
- We need to pass in information reduntant with the owning source,
namely its object directory and whether the source is local or not.
- We don't have access to the source when loading the multi-pack
index. If we had that access, we could store a pointer to the owning
source in the MIDX and thus deduplicate some information.
- Multi-pack indices are inherently specific to the object source and
its format. With the goal of pluggable object backends in mind we
will eventually want the backends to own the logic of reading and
writing multi-pack indices. Making the logic work on top of object
sources is a step into that direction.
Refactor loading of multi-pack indices accordingly.
This surfaces one small problem though: git-multi-pack-index(1) and our
MIDX test helper both know to read and write multi-pack-indices located
in a different object directory. This issue is addressed by adding the
user-provided object directory as an in-memory alternate.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `object_directory` structure is used as an access point for a single
object directory like ".git/objects". While the structure isn't yet
fully self-contained, the intent is for it to eventually contain all
information required to access objects in one specific location.
While the name "object directory" is a good fit for now, this will
change over time as we continue with the agenda to make pluggable object
databases a thing. Eventually, objects may not be accessed via any kind
of directory at all anymore, but they could instead be backed by any
kind of durable storage mechanism. While it seems quite far-fetched for
now, it is thinkable that eventually this might even be some form of a
database, for example.
As such, the current name of this structure will become worse over time
as we evolve into the direction of pluggable ODBs. Immediate next steps
will start to carve out proper self-contained object directories, which
requires us to pass in these object directories as parameters. Based on
our modern naming schema this means that those functions should then be
named after their subsystem, which means that we would start to bake the
current name into the codebase more and more.
Let's preempt this by renaming the structure. There have been a couple
alternatives that were discussed:
- `odb_backend` was discarded because it led to the association that
one object database has a single backend, but the model is that one
alternate has one backend. Furthermore, "backend" is more about the
actual backing implementation and less about the high-level concept.
- `odb_alternate` was discarded because it is a bit of a stretch to
also call the main object directory an "alternate".
Instead, pick `odb_source` as the new name. It makes it sufficiently
clear that there can be multiple sources and does not cause confusion
when mixed with the already-existing "alternate" terminology.
In the future, this change allows us to easily introduce for example a
`odb_files_source` and other format-specific implementations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update parse-options API to catch mistakes to pass address of an
integral variable of a wrong type/size.
* ps/parse-options-integers:
parse-options: detect mismatches in integer signedness
parse-options: introduce precision handling for `OPTION_UNSIGNED`
parse-options: introduce precision handling for `OPTION_INTEGER`
parse-options: rename `OPT_MAGNITUDE()` to `OPT_UNSIGNED()`
parse-options: support unit factors in `OPT_INTEGER()`
global: use designated initializers for options
parse: fix off-by-one for minimum signed values
|
|
With the preceding commit, `OPT_INTEGER()` has learned to support unit
factors. Consequently, the major differencen between `OPT_INTEGER()` and
`OPT_MAGNITUDE()` isn't the support of unit factors anymore, as both of
them do support them now. Instead, the difference is that one handles
signed and the other handles unsigned integers.
Adapt the name of `OPT_MAGNITUDE()` accordingly by renaming it to
`OPT_UNSIGNED()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a previous commit, we passed the repository field to all
subcommands in the `builtin/` directory. Utilize this to pass the
repository field down to the `write_midx_file[_only]` functions to
remove the usage of `the_repository` global variables.
With this, all usage of global variables in `midx-write.c` is removed,
hence, remove the `USE_THE_REPOSITORY_VARIABLE` guard from the file.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 9b1cb5070f (builtin: add a repository parameter for builtin
functions, 2024-09-13) the repository was passed down to all builtin
commands. This allowed the repository to be passed down to lower layers
without depending on the global `the_repository` variable.
Continue this work by also passing down the repository parameter from
the command to sub-commands. This will help pass down the repository to
other subsystems and cleanup usage of global variables like
'the_repository' and 'the_hash_algo'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_object_directory()` function retrieves the path to the object
directory for `the_repository`. Make it accept a `struct repository`
such that it can work on arbitrary repositories and make it part of the
repository subsystem. This reduces our reliance on `the_repository` and
clarifies scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the rest of the MIDX subsystem and relevant callers have been
updated to learn about how to read and process incremental MIDX chains,
let's finally update the implementation in `write_midx_internal()` to be
able to write incremental MIDX chains.
This new feature is available behind the `--incremental` option for the
`multi-pack-index` builtin, like so:
$ git multi-pack-index write --incremental
The implementation for doing so is relatively straightforward, and boils
down to a handful of different kinds of changes implemented in this
patch:
- The `compute_sorted_entries()` function is taught to reject objects
which appear in any existing MIDX layer.
- Functions like `write_midx_revindex()` are adjusted to write
pack_order values which are offset by the number of objects in the
base MIDX layer.
- The end of `write_midx_internal()` is adjusted to move
non-incremental MIDX files when necessary (i.e. when creating an
incremental chain with an existing non-incremental MIDX in the
repository).
There are a handful of other changes that are introduced, like new
functions to clear incremental MIDX files that are unrelated to the
current chain (using the same "keep_hash" mechanism as in the
non-incremental case).
The tests explicitly exercising the new incremental MIDX feature are
relatively limited for two reasons:
1. Most of the "interesting" behavior is already thoroughly covered in
t5319-multi-pack-index.sh, which handles the core logic of reading
objects through a MIDX.
The new tests in t5334-incremental-multi-pack-index.sh are mostly
focused on creating and destroying incremental MIDXs, as well as
stitching their results together across layers.
2. A new GIT_TEST environment variable is added called
"GIT_TEST_MULTI_PACK_INDEX_WRITE_INCREMENTAL", which modifies the
entire test suite to write incremental MIDXs after repacking when
combined with the "GIT_TEST_MULTI_PACK_INDEX" variable.
This exercises the long tail of other interesting behavior that is
defined implicitly throughout the rest of the CI suite. It is
likewise added to the linux-TEST-vars job.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `OPT_FILENAME()` option will, if set, put an allocated string into
the user-provided variable. Consequently, that variable thus needs to be
free'd by the caller of `parse_options()`. Some callsites don't though
and thus leak memory. Fix those.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We observed a series of clone failures arose in a specific set of
repositories after we fully enabled the MIDX bitmap feature within our
Codebase service. These failures were accompanied with error messages
such as:
Cloning into bare repository 'clone.git'...
remote: Enumerating objects: 8, done.
remote: Total 8 (delta 0), reused 0 (delta 0), pack-reused 8 (from 1)
Receiving objects: 100% (8/8), done.
fatal: did not receive expected object ...
fatal: fetch-pack: invalid index-pack output
Temporarily disabling the MIDX feature eliminated the reported issues.
After some investigation we found that all repositories experiencing
failures contain replace references, which seem to be improperly
acknowledged by the MIDX bitmap generation logic.
A more thorough explanation about the root cause from Taylor Blau says:
Indeed, the pack-bitmap-write machinery does not itself call
disable_replace_refs(). So when it generates a reachability bitmap, it
is doing so with the replace refs in mind. You can see that this is
indeed the cause of the problem by looking at the output of an
instrumented version of Git that indicates what bits are being set
during the bitmap generation phase.
With replace refs (incorrectly) enabled, we get:
[2, 4, 6, 8, 13, 3, 6, 7, 3, 4, 6, 8]
and doing the same after calling disable_replace_refs(), we instead get:
[2, 5, 6, 13, 3, 6, 7, 3, 4, 6, 8]
Single pack bitmaps are unaffected by this issue because we generate
them from within pack-objects, which does call disable_replace_refs().
This patch updates the MIDX logic to disable replace objects within the
multi-pack-index builtin, and a test showing a clone (which would fail
with MIDX bitmap) is added to demonstrate the bug.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We declare the --object-dir option like:
OPT_CALLBACK(0, "object-dir", &opts.object_dir, ...);
but the pointer to opts.object_dir is completely unused. Instead, the
callback writes directly to a global. Which fortunately happens to be
opts.object_dir. So everything works as expected, but it's unnecessarily
confusing.
Instead, let's have the callback write to the option value pointer that
has been passed in. This also quiets a -Wunused-parameter warning (since
we don't otherwise look at "opt").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
|
|
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
|
|
The pack bitmap file gained a bitmap-lookup table to speed up
locating the necessary bitmap for a given commit.
* ac/bitmap-lookup-table:
pack-bitmap-write: drop unused pack_idx_entry parameters
bitmap-lookup-table: add performance tests for lookup table
pack-bitmap: prepare to read lookup table extension
pack-bitmap-write: learn pack.writeBitmapLookupTable and add tests
pack-bitmap-write.c: write lookup table extension
bitmap: move `get commit positions` code to `bitmap_writer_finish`
Documentation/technical: describe bitmap lookup table extension
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach Git to provide a way for users to enable/disable bitmap lookup
table extension by providing a config option named 'writeBitmapLookupTable'.
Default is false.
Also add test to verify writting of lookup table.
Mentored-by: Taylor Blau <me@ttaylorr.com>
Co-Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Co-Authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent commits such as bf0a6b65fc (builtin/multi-pack-index.c: let
parse-options parse subcommands, 2022-08-19) converted a few functions
to match our usual argc/argv/prefix conventions, but the prefix argument
remains unused.
However, there is a good use for it: they should pass it to their own
parse_options() functions, where it may be used to adjust the value of
any filename options. In all but one of these functions, there's no
behavior change, since they don't use OPT_FILENAME. But this is an
actual fix for one option, which you can see by modifying the test suite
like so:
diff --git a/t/t5326-multi-pack-bitmaps.sh b/t/t5326-multi-pack-bitmaps.sh
index 4fe57414c1..d0974d4371 100755
--- a/t/t5326-multi-pack-bitmaps.sh
+++ b/t/t5326-multi-pack-bitmaps.sh
@@ -186,7 +186,11 @@ test_expect_success 'writing a bitmap with --refs-snapshot' '
# Then again, but with a refs snapshot which only sees
# refs/tags/one.
- git multi-pack-index write --bitmap --refs-snapshot=snapshot &&
+ (
+ mkdir subdir &&
+ cd subdir &&
+ git multi-pack-index write --bitmap --refs-snapshot=../snapshot
+ ) &&
test_path_is_file $midx &&
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
I'd emphasize that this wasn't broken by bf0a6b65fc; it has been broken
all along, because the sub-function never got to see the prefix. It is
that commit which is actually enabling us to fix it (and which also
brought attention to the problem because it triggers -Wunused-parameter!)
The other functions changed here don't use OPT_FILENAME at all. In their
cases this isn't fixing anything visible, but it's following the usual
pattern and future-proofing them against somebody adding new options and
being surprised.
I didn't include a test for the one visible case above. We don't
generally test routine parse-options behavior for individual options.
The challenge here was finding the problem, and now that this has been
done, it's not likely to regress. Likewise, we could apply the patch
above to cover it "for free" but it makes reading the rest of the test
unnecessarily complicated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git multi-pack-index' parses its subcommands with a couple of if-else
if statements. parse-options has just learned to parse subcommands,
so let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Note that the functions implementing each subcommand only accept the
'argc' and '**argv' parameters, so add a (unused) '*prefix' parameter
to make them match the type expected by parse-options, and thus avoid
casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although parse_options() can handle unknown --options just fine, none
of 'git multi-pack-index's subcommands rely on it, but do it on their
own: they invoke parse_options() with the PARSE_OPT_KEEP_UNKNOWN flag,
then check whether there are any unparsed arguments left, and print
usage and quit if necessary.
Drop that PARSE_OPT_KEEP_UNKNOWN flag to let parse_options() handle
unknown options instead, which has the additional benefit that it
prints not only the usage but an "error: unknown option `foo'" message
as well.
Do leave the unparsed arguments check to catch any unexpected
non-option arguments, though, e.g. 'git multi-pack-index write foo'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --object-dir argument to 'git multi-pack-index' allows a user to
specify an alternate to use instead of the local $GITDIR. This is used
by third-party tools like VFS for Git to maintain the pack-files in a
"shared object cache" used by multiple clones.
On Windows, the user can specify a path using a Windows-style file path
with backslashes such as "C:\Path\To\ObjectDir". This same path style is
used in the .git/objects/info/alternates file, so it already matches the
path of that alternate. However, find_odb() converts these paths to
real-paths for the comparison, which use forward slashes. As of the
previous change, lookup_multi_pack_index() uses real-paths, so it
correctly finds the target multi-pack-index when given these paths.
Some commands such as 'git multi-pack-index repack' call child processes
using the object_dir value, so it can be helpful to convert the path to
the real-path before sending it to those locations.
Add a callback to convert the real path immediately upon parsing the
argument. We need to be careful that we don't store the exact value out
of get_object_directory() and free it, or we could corrupt a later use
of the_repository->objects->odb->path.
We don't use get_object_directory() for the initial instantiation in
cmd_multi_pack_index() because we need 'git multi-pack-index -h' to work
without a Git repository.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `multi-pack-index` builtin dynamically allocates an array of
command-line option for each of its separate modes by calling
add_common_options() to concatante the common options with sub-command
specific ones.
Because this operation allocates a new array, we have to be careful to
remember to free it. We already do this in the repack and write
sub-commands, but verify and expire don't. Rectify this by calling
FREE_AND_NULL as the other modes do.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
|
|
"git multi-pack-index write --bitmap" learns to propagate the
hashcache from original bitmap to resulting bitmap.
* tb/midx-write-propagate-namehash:
t5326: test propagating hashcache values
p5326: generate pack bitmaps before writing the MIDX bitmap
p5326: don't set core.multiPackIndex unnecessarily
p5326: create missing 'perf-tag' tag
midx.c: respect 'pack.writeBitmapHashcache' when writing bitmaps
pack-bitmap.c: propagate namehash values from existing bitmaps
t/helper/test-bitmap.c: add 'dump-hashes' mode
|
|
Regression in "git commit-graph" command line parsing has been
corrected.
* tb/commit-graph-usage-fix:
builtin/multi-pack-index.c: disable top-level --[no-]progress
builtin/commit-graph.c: don't accept common --[no-]progress
|
|
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To power a new `--write-midx` mode, `git repack` will want to write a
multi-pack index containing a certain set of packs in the repository.
This new option will be used by `git repack` to write a MIDX which
contains only the packs which will survive after the repack (that is, it
will exclude any packs which are about to be deleted).
This patch effectively exposes the function implemented in the previous
commit via the `git multi-pack-index` builtin. An alternative approach
would have been to call that function from the `git repack` builtin
directly, but this introduces awkward problems around closing and
reopening the object store, so the MIDX will be written out-of-process.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the previous patch, let sub-commands which
support showing or hiding a progress meter handle parsing the
`--progress` or `--no-progress` option, but do not expose it as an
option to the top-level `multi-pack-index` builtin.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
