| Age | Commit message (Collapse) | Author |
|---|
|
The merge-ours built-in opens the index to compare it against HEAD.
The machinery used to do this (i.e. run_diff_index()) is capable of
working with a sparse index, but the start-up sequence of this
command does not take the necessary steps, so we end up expanding the
index fully before doing the comparison.
In order to convince sparse-index.c:is_sparse_index_allowed() to
return true, we need to:
- Read basic configuration with git_default_config so that global
variables like core_apply_sparse_checkout are populated.
merge-ours currently does not read configuration at all.
- Set command_requires_full_index to 0.
With that, the command can work without expanding the index fully
before doing its work.
Signed-off-by: Sam Bostock <sam@sambostock.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge-ours built-in uses the `the_repository` global to access
the repository. The project is moving away from this global in favor
of the `repo` parameter that is passed to each built-in command.
Since merge-ours is registered with RUN_SETUP, `repo` is guaranteed
to be non-NULL and can be used directly.
Drop the USE_THE_REPOSITORY_VARIABLE macro and use `repo` throughout.
While at it, remove a stray double blank line between the #include
block and the usage string.
Signed-off-by: Sam Bostock <sam@sambostock.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the show_usage_and_exit_if_asked() helper we introduced
earlier, fix callers of usage() that want to show the help text when
explicitly asked by the end-user. The help text now goes to the
standard output stream for them.
These are the bog standard "if we got only '-h', then that is a
request for help" callers. Their
if (argc == 2 && !strcmp(argv[1], "-h"))
usage(message);
are simply replaced with
show_usage_and_exit_if_asked(argc, argv, message);
With this, the built-ins tested by t0012 all send their help text to
their standard output stream, so the check in t0012 that was half
tightened earlier is now fully tightened to insist on standard error
stream being empty.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `struct diff_flags` structure is essentially an array of flags, all
of which have the same type. We can thus use `sizeof()` to iterate
through all of the flags, which we do in `diff_flags_or()`. But while
the statement returns an unsigned integer, we used a signed integer to
iterate through the flags, which generates a warning.
Fix this by using `size_t` for the index instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All builtins receive a "prefix" parameter, but it is only useful if they
need to adjust filenames given by the user on the command line. For
builtins that do not even call parse_options(), they often don't look at
the prefix at all, and -Wunused-parameter complains.
Let's annotate those to silence the compiler warning. I gave a quick
scan of each of these cases, and it seems like they don't have anything
they _should_ be using the prefix for (i.e., there is no hidden bug that
we are missing). The only questionable cases I saw were:
- in git-unpack-file, we create a tempfile which will always be at the
root of the repository, even if the command is run from a subdir.
Arguably this should be created in the subdir from which we're run
(as we report the path only as a relative name). However, nobody has
complained, and I'm hesitant to change something that is deep
plumbing going back to April 2005 (though I think within our
scripts, the sole caller in git-merge-one-file would be OK, as it
moves to the toplevel itself).
- in fetch-pack, local-filesystem remotes are taken as relative to the
project root, not the current directory. So:
git init server.git
[...put stuff in server.git...]
git init client.git
cd client.git
mkdir subdir
cd subdir
git fetch-pack ../../server.git ...
won't work, as we quietly move to the top of the repository before
interpreting the path (so "../server.git" would work). This is
weird, but again, nobody has complained and this is how it has
always worked. And this is how "git fetch" works, too. Plus it
raises questions about how a configured remote like:
git config remote.origin.url ../server.git
should behave. I can certainly come up with a reasonable set of
behavior, but it may not be worth stirring up complications in a
plumbing tool.
So I've left the behavior untouched in both of those cases. If anybody
really wants to revisit them, it's easy enough to drop the UNUSED
marker. This commit is just about removing them as obstacles to turning
on -Wunused-parameter all the time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change various cmd_* functions that claim to return an "int" to use
"return" instead of exit() to indicate an exit code. These were not
marked with NORETURN, and by directly exit()-ing we'll skip the
cleanup git.c would otherwise do (e.g. closing fd's, erroring if we
can't). See run_builtin() in git.c.
In the case of shell.c and sh-i18n--envsubst.c this was the result of
an incomplete migration to using a cmd_main() in 3f2e2297b9 (add an
extra level of indirection to main(), 2016-07-01).
This was spotted by SunCC 12.5 on Solaris 10 (gcc210 on the gccfarm).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
|
|
The call to cmd_diff_index() "git merge-ours" makes has been working
by accident that the function did not call exit(3), and the caller
exited almost immediately after making a call, but it sets a bad
precedent for people to cut and paste.
For finding out if the index exactly matches the HEAD (or a given
tree-ish), there is index_differs_from() which is exactly written
for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
