| Age | Commit message (Collapse) | Author |
|---|
|
The object header string is meant to record the relevant toolchain
configuration, so that we don't import or link object files that are
incompatible with each other. One important part of compatibility
is the sub-architecture version (GOARM for GOARCH=arm, and so on).
Add the sub-architecture info to the object header line so that
binaries cannot be built that have inconsistent sub-architecture
configurations across the build.
This check is only important when the build system makes a mistake.
Builds using the go command don't make this kind of mistake anymore,
but we just debugged a difficult problem inside Google where a custom
build system had built part of a program with GOARM=5 and part of
a program with GOARM=7, resulting in corrupted execution when
signal-based preemption was attempted. Updating the check will avoid
this kind of problem in the future, in any custom build system, or if the
go command makes a mistake.
After this change:
% sed 3q pkg/darwin_amd64/runtime.a
!<arch>
__.PKGDEF 0 0 0 644 30525 `
go object darwin amd64 devel go1.20-102ebe10b7 Wed Aug 17 14:31:01 2022 -0400 GOAMD64=v1 X:regabiwrappers,regabiargs
%
Change-Id: I901e0758f1002dd2c58292dc65e2d06da86e4495
Reviewed-on: https://go-review.googlesource.com/c/go/+/427174
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
|
|
cmd/go/internal/cfg duplicates many of the fields of
internal/buildcfg, but initializes them from a Go environment file in
addition to the usual process environment.
internal/buildcfg doesn't (and shouldn't) know or care about that
environment file, but prior to this CL it exposed hooks for
cmd/go/internal/cfg to write data back to internal/buildcfg to
incorporate information from the file. It also produced quirky
GOEXPERIMENT strings when a non-trivial default was overridden,
seemingly so that 'go env' would produce those same quirky strings in
edge-cases where they are needed.
This change reverses that information flow: internal/buildcfg now
exports a structured type with methods — instead of top-level
functions communicating through global state — so that cmd/go can
utilize its marshaling and unmarshaling functionality without also
needing to write results back into buildcfg package state.
The quirks specific to 'go env' have been eliminated by distinguishing
between the raw GOEXPERIMENT value set by the user (which is what we
should report from 'go env') and the cleaned, canonical equivalent
(which is what we should use in the build cache key).
For #51461.
Change-Id: I4ef5b7c58b1fb3468497649a6d2fb6c19aa06c70
Reviewed-on: https://go-review.googlesource.com/c/go/+/393574
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
|
|
Create constant LocalDictName for the pname/refix for dictionary
parameters or local variables, and constant GlobalDictPrefix for the
prefix for names of global dictionaries. I wanted to make sure these
constants were set up as we add more reference to dictionaries for
debugging, etc.
Change-Id: Ide801f842383300a2699c96943ec06decaecc358
Reviewed-on: https://go-review.googlesource.com/c/go/+/351450
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
|
|
The go/build package needs access to this configuration,
so move it into a new package available to the standard library.
Change-Id: I868a94148b52350c76116451f4ad9191246adcff
Reviewed-on: https://go-review.googlesource.com/c/go/+/310731
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
|
|
Right now the rules around handling default-on experiments are
complicated and a bit inconsistent. Notably, objabi.GOEXPERIMENT is
set to a comma-separated list of enabled experiments, but this may not
be the string a user should set the GOEXPERIMENT environment variable
to get that list of experiments: if an experiment is enabled by
default but gets turned off by GOEXPERIMENT, then the string we report
needs to include "no"+experiment to capture that default override.
This complication also seeps into the version string we print for "go
tool compile -V", etc. This logic is further complicated by the fact
that it only wants to include an experiment string if the set of
experiments varies from the default.
This CL rethinks how we handle default-on experiments. Now that
experiment state is all captured in a struct, we can simplify a lot of
this logic. objabi.GOEXPERIMENT will be set based on the delta from
the default set of experiments, which reflects what a user would
actually need to pass on the command line. Likewise, we include this
delta in the "-V" output, which simplifies this logic because if
there's nothing to show in the version string, the delta will be
empty.
Change-Id: I7ed307329541fc2c9f90edd463fbaf8e0cc9e8ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/307819
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
|
|
Change-Id: Idbbb4cb7127b93afa34a8aa18bbdaad1f206ab6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/308090
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
|
|
Currently there's knowledge about the list of GOEXPERIMENTs in a few
different places. This CL introduces a new package and consolidates
the list into one place: the internal/goexperiment.Flags struct type.
This package gives us a central place to document the experiments as
well as the GOEXPERIMENT environment variable itself. It will also
give us a place to put built-time constants derived from the enabled
experiments.
Now the objabi package constructs experiment names by reflecting over
this struct type rather than having a separate list of these names
(this is similar to how the compiler handles command-line flags and
debug options). We also expose a better-typed API to the toolchain for
propagating enabled experiments.
Change-Id: I06e026712b59fe2bd7cd11a869aedb48ffe5a4b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/307817
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
|
|
We have ways to statically access experiments now, so we don't need a
relatively clunky string-parsing dynamic way to do it.
Change-Id: I5d75480916eef4bde2c30d5fe30593180da77ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/307815
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
|
|
The covers three kinds of uses:
1. Calls of closures from assembly. These are always ABIInternal calls
without wrappers. I went through every indirect call in the runtime
and I think mcall is the only case of assembly calling a Go closure in
a way that's affected by ABIInternal. systemstack also calls a
closure, but it takes no arguments.
2. Calls of Go functions that expect raw ABIInternal pointers. I also
only found one of these: callbackasm1 -> cgocallback on Windows. These
are trickier to find, though.
3. Finally, I found one case on NetBSD where new OS threads were
directly calling the Go runtime entry-point from assembly via a PC,
rather than going through a wrapper. This meant new threads may not
have special registers set up. In this case, a change on all other
OSes had already forced new thread entry to go through an ABI wrapper,
so I just caught NetBSD up with that change.
With this change, I'm able to run a "hello world" with
GOEXPERIMENT=regabi,regabiargs.
For #40724.
Change-Id: I2a6d0e530c4fd4edf13484d923891c6160d683aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/305669
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
|
|
Adds code to the compiler's "order" phase to rewrite go and defer
statements to always be argument-less. E.g.
defer f(x,y) => x1, y1 := x, y
defer func() { f(x1, y1) }
This transformation is not beneficial on its own, but it helps
simplify runtime defer handling for the new register ABI (when
invoking deferred functions on the panic path, the runtime doesn't
need to manage the complexity of determining which args to pass in
register vs memory).
This feature is currently enabled by default if GOEXPERIMENT=regabi or
GOEXPERIMENT=regabidefer is in effect.
Included in this CL are some workarounds in the runtime to insure that
"go" statement targets in the runtime are argument-less already (since
wrapping them can potentially introduce heap-allocated closures, which
are currently not allowed). The expectation is that these workarounds
will be temporary, and can go away once we either A) change the rules
about heap-allocated closures, or B) implement some other scheme for
handling go statements.
Change-Id: I01060d79a6b140c6f0838d6e6813f807ccdca319
Reviewed-on: https://go-review.googlesource.com/c/go/+/298669
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
|
|
Previously, the runtime had to understand the full syntax of the
GOEXPERIMENT environment variable. Now, sys.GOEXPERIMENT is the
pre-processed experiment list produced by objabi, so we can simplify
the runtime parser.
Change-Id: I0d113a4347dde50a35b8b1f2b0110c88fe802921
Reviewed-on: https://go-review.googlesource.com/c/go/+/303049
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
This moves all remaining GOEXPERIMENT flags into the objabi.Experiment
struct, drops the "_enabled" from their name, and makes them all bool
typed.
We also drop DebugFlags.Fieldtrack because the previous CL shifted the
one test that used it to use GOEXPERIMENT instead.
Change-Id: I3406fe62b1c300bb4caeaffa6ca5ce56a70497fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/302389
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
|
|
This separates GOEXPERIMENT=regabi into five sub-experiments:
regabiwrappers, regabig, regabireflect, regabidefer, and regabiargs.
Setting GOEXPERIMENT=regabi now implies the working subset of these
(currently, regabiwrappers, regabig, and regabireflect).
This simplifies testing, helps derisk the register ABI project,
and will also help with performance comparisons.
This replaces the -abiwrap flag to the compiler and linker with
the regabiwrappers experiment.
As part of this, regabiargs now enables registers for all calls
in the compiler. Previously, this was statically disabled in
regabiEnabledForAllCompilation, but now that we can control it
independently, this isn't necessary.
For #40724.
Change-Id: I5171e60cda6789031f2ef034cc2e7c5d62459122
Reviewed-on: https://go-review.googlesource.com/c/go/+/302070
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
|
|
Currently, objabi exports GOEXPERIMENT flags as ints that are either 0
or 1. Since the dawn of time, there's been a comment saying that we
*could* support general integers here, but it's never happened and all
the "== 0" and "!= 0" and "== 1" are driving me crazy and are making
the code harder to read and maintain. Hence, this CL adds support for
boolean GOEXPERIMENT flags. We'll introduce some bool-typed flags in
the next CL.
Change-Id: I7813400db130a9b8f71a644fe7912808dbe645bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/302069
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Currently, dist attempts to build the bootstrap with the GOEXPERIMENT
set in the environment. However, the logic is incomplete and notably
requires a hack to enable the appropriate build tags for
GOEXPERIMENT=regabi. Without this hack, the build becomes skewed
between a compiler that uses regabi and a runtime that doesn't when
building toolchain2.
We could try to improve the GOEXPERIMENT processing in cmd/dist, but
it will always chase cmd/internal/objabi and it's quite difficult to
share the logic with objabi because of the constraints on building
cmd/dist.
Instead, we switch to building go_bootstrap without any GOEXPERIMENT
and only start using GOEXPERIMENT once we have a working, modern
cmd/go (which has all the GOEXPERIMENT logic in it). We also build
toolchain1 without any GOEXPERIMENT set, in case the bootstrap
toolchain is recent enough to understand build-time GOEXPERIMENT
settings.
As part of this, we make GOEXPERIMENT=none mean "no experiments". This
is necessary since, now that we support setting GOEXPERIMENT at build
time, we need an explicit way to say "ignore all baked-in experiments".
For #40724.
Change-Id: I115399579b766a7a8b2f352f7e5efea5305666cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/302050
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
objabi parses GOEXPERIMENT, but most of the consumers look at the raw
GOEXPERIMENT string that objabi gets from the environment. Centralize
this logic by only exposing the parsed GOEXPERIMENT value from objabi.
This sets us up for the next few changes. It also has the nice but
mostly useless property that the order of experiment names will be
canonicalized in build cache hashes.
After this, the only remaining place that looks at raw GOEXPERIMENT is
cmd/dist, which we'll fix in the next CL.
For #40724.
Change-Id: Idb150f848e17c184fae91372ca8b361591472f51
Reviewed-on: https://go-review.googlesource.com/c/go/+/302049
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
This CL changes GOEXPERIMENT to act like other GO[CONFIG] environment
variables. Namely, that it can be set at make.bash time to provide a
default value used by the toolchain, but then can be manually set when
running either cmd/go or the individual tools (compiler, assembler,
linker).
For example, it's now possible to test rsc.io/tmp/fieldtrack by simply
running:
GOEXPERIMENT=fieldtrack go test -gcflags=-l rsc.io/tmp/fieldtrack \
-ldflags=-k=rsc.io/tmp/fieldtrack.tracked
without needing to re-run make.bash. (-gcflags=-l is needed because
the compiler's inlining abilities have improved, so calling a function
with a for loop is no longer sufficient to suppress inlining.)
Fixes #42681.
Change-Id: I2cf8995d5d0d05f6785a2ee1d3b54b2cfb3331ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/300991
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
|
|
Frame pointers were already enabled on linux, darwin, ios,
but not freebsd, android, openbsd, netbsd.
But the space was reserved on all platforms, leading to
two different arm64 framepointer conditions in different
parts of the code, one of which had no name
(framepointer_enabled || GOARCH == "arm64",
which might have been "framepointer_space_reserved").
So on the disabled systems, the stack layouts were still
set up for frame pointers and the only difference was not
actually maintaining the FP register in the generated code.
Reduce complexity by just enabling the frame pointer
completely on all the arm64 systems.
This commit passes on freebsd, android, netbsd.
I have not been able to try it on openbsd.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I83bd23369d24b76db4c6a648fa74f6917819a093
Reviewed-on: https://go-review.googlesource.com/c/go/+/288814
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Fixes the android/arm builder. Without it, the builder reported
unexpected stale targets during bootstrap:
https://build.golang.org/log/b951f1171be54cf4a12c2a0720ffaf07f8a11377
Tighten the GOARM=7 default in cmd/internal/objabi while here.
Change-Id: I944744910193e72e91bc37b5bf0783076b45e579
Reviewed-on: https://go-review.googlesource.com/c/go/+/273167
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Elias Naur <mail@eliasnaur.com>
|
|
CL 34641 changed the Go runtime to assume GOARM=7 support on Android.
This change completes that by assuming GOARM=7 in the toolchain, fixing
the gotcha of inexplicably slow performance on non-arm64 Android devices.
There is already code in cmd/dist to force GOARM to 7 on GOOS=android. However,
dist is most likely run with GOOS != android.
Change-Id: I5e2bf11c3ecd0f6c193229eaa8ddc570722799d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/272846
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Elias Naur <mail@eliasnaur.com>
|
|
Always do aligned jumps now.
Change-Id: If68a16fe93c9173c83323a9063465c9bd166eeb8
Reviewed-on: https://go-review.googlesource.com/c/go/+/266857
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
|
|
Backstop support for non-sse2 chips now that 387 is gone.
RELNOTE=yes
Change-Id: Ib10e69c4a3654c15a03568f93393437e1939e013
Reviewed-on: https://go-review.googlesource.com/c/go/+/260017
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
My last 387 CL. So sad ... ... ... ... not!
Fixes #40255
Change-Id: I8d4ddb744b234b8adc735db2f7c3c7b6d8bbdfa4
Reviewed-on: https://go-review.googlesource.com/c/go/+/258957
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Introduce GOOS=ios for iOS systems. GOOS=ios matches "darwin"
build tag, like GOOS=android matches "linux" and GOOS=illumos
matches "solaris". Only ios/arm64 is supported (ios/amd64 is
not).
GOOS=ios and GOOS=darwin remain essentially the same at this
point. They will diverge at later time, to differentiate macOS
and iOS.
Uses of GOOS=="darwin" are changed to (GOOS=="darwin" || GOOS=="ios"),
except if it clearly means macOS (e.g. GOOS=="darwin" && GOARCH=="amd64"),
it remains GOOS=="darwin".
Updates #38485.
Change-Id: I4faacdc1008f42434599efb3c3ad90763a83b67c
Reviewed-on: https://go-review.googlesource.com/c/go/+/254740
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
|
|
This is the "feature flag" for the register calling convention work
(though since this work is expected to extend over a few releases,
it's not version-prefixed). This will let us develop the register
calling convention on the main branch while maintaining an easy toggle
between the old and new ABIs.
Updates #40724.
Change-Id: I129c8d87d34e6fa0910b6fa43efb35b706021637
Reviewed-on: https://go-review.googlesource.com/c/go/+/252257
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
I think they are no longer experimental status. Might as well promote
them to permanent.
Change-Id: Id1259601b3dd2061dd60df86ee48080bfb575d2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/249857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
|
|
This improves stack unwinding of Go code running on iOS arm64.
Change-Id: I0494f750c15dcb895f9d4a072352f050d731df17
GitHub-Last-Rev: 435a2a1690dad98975f7463f91241831cd73d3df
GitHub-Pull-Request: golang/go#37403
Reviewed-on: https://go-review.googlesource.com/c/go/+/220588
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
This removes the GOAMD64 environment variable and its documentation.
The value is instead supplied by a compiled-in constant.
Note that function alignment is also dependent on the value of
the (removed) flag; it is 32 for aligned jumps, 16 if not.
When the flag-dependent logic is removed, it will be 32.
Updates #35881.
Change-Id: Ic41c0b9833d2e8a31fa3ce8067d92aa2f165bf72
Reviewed-on: https://go-review.googlesource.com/c/go/+/231600
Reviewed-by: Austin Clements <austin@google.com>
|
|
This commit adds a new option to the x86 assembler. If the
GOAMD64 environment variable is set to alignedjumps (the
default) and we're doing a 64 bit build, the assembler will
make sure that neither stand alone nor macro-fused jumps will
end on or cross 32 byte boundaries. To achieve this, functions
are aligned on 32 byte boundaries, rather than 16 bytes, and
jump instructions are padded to ensure that they do not
cross or end on 32 byte boundaries. Jumps are padded
by adding a NOP instruction of the appropriate length before
the jump.
The commit is likely to result in larger binary sizes when
GOAMD64=alignedjumps. On the binaries tested so far, an
increase of between 1.4% and 1.5% has been observed.
Updates #35881
Co-authored-by: David Chase <drchase@google.com>
Change-Id: Ief0722300bc3f987098e4fd92b22b14ad6281d91
Reviewed-on: https://go-review.googlesource.com/c/go/+/219357
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
I took some of the infrastructure from Austin's lock logging CR
https://go-review.googlesource.com/c/go/+/192704 (with deadlock
detection from the logs), and developed a setup to give static lock
ranking for runtime locks.
Static lock ranking establishes a documented total ordering among locks,
and then reports an error if the total order is violated. This can
happen if a deadlock happens (by acquiring a sequence of locks in
different orders), or if just one side of a possible deadlock happens.
Lock ordering deadlocks cannot happen as long as the lock ordering is
followed.
Along the way, I found a deadlock involving the new timer code, which Ian fixed
via https://go-review.googlesource.com/c/go/+/207348, as well as two other
potential deadlocks.
See the constants at the top of runtime/lockrank.go to show the static
lock ranking that I ended up with, along with some comments. This is
great documentation of the current intended lock ordering when acquiring
multiple locks in the runtime.
I also added an array lockPartialOrder[] which shows and enforces the
current partial ordering among locks (which is embedded within the total
ordering). This is more specific about the dependencies among locks.
I don't try to check the ranking within a lock class with multiple locks
that can be acquired at the same time (i.e. check the ranking when
multiple hchan locks are acquired).
Currently, I am doing a lockInit() call to set the lock rank of most
locks. Any lock that is not otherwise initialized is assumed to be a
leaf lock (a very high rank lock), so that eliminates the need to do
anything for a bunch of locks (including all architecture-dependent
locks). For two locks, root.lock and notifyList.lock (only in the
runtime/sema.go file), it is not as easy to do lock initialization, so
instead, I am passing the lock rank with the lock calls.
For Windows compilation, I needed to increase the StackGuard size from
896 to 928 because of the new lock-rank checking functions.
Checking of the static lock ranking is enabled by setting
GOEXPERIMENT=staticlockranking before doing a run.
To make sure that the static lock ranking code has no overhead in memory
or CPU when not enabled by GOEXPERIMENT, I changed 'go build/install' so
that it defines a build tag (with the same name) whenever any experiment
has been baked into the toolchain (by checking Expstring()). This allows
me to avoid increasing the size of the 'mutex' type when static lock
ranking is not enabled.
Fixes #38029
Change-Id: I154217ff307c47051f8dae9c2a03b53081acd83a
Reviewed-on: https://go-review.googlesource.com/c/go/+/207619
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
This is part two if the nacl removal. Part 1 was CL 199499.
This CL removes amd64p32 support, which might be useful in the future
if we implement the x32 ABI. It also removes the nacl bits in the
toolchain, and some remaining nacl bits.
Updates #30439
Change-Id: I2475d5bb066d1b474e00e40d95b520e7c2e286e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/200077
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
Setting environment variables for go command configuration
is too difficult and system-specific. This CL adds go env -w,
to change the default settings more easily, in a portable way.
It also adds go env -u, to unset those changes.
See https://golang.org/design/30411-env for details.
Fixes #30411.
Change-Id: I36e83f55b666459f8f7f482432a4a6ee015da71d
Reviewed-on: https://go-review.googlesource.com/c/go/+/171137
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
|
|
Currently the offset values of ELF relocations and Macho relocations
are 256 and 512 respectively, which means that the space reserved for
ELF relocations is only 256. But AARCH64 has more than 256 ELF relocation
types, in fact the maximum AARCH64 ELF relocation type recorded in file
src/debug/elf/elf.go is 1032 currently. So this CL increases the offset
of Macho relocations to 2048 to leave enough space for AARCH64 ELF
relocations.
Change-Id: I784ac38aeb3e102ac7825f6d621086849c8d3146
Reviewed-on: https://go-review.googlesource.com/c/go/+/172497
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
This change adds the GOWASM option "satconv" to enable the generation
of experimental saturating (non-trapping) float-to-int conversions.
It improves the performance of the conversion by 42%.
Previously the conversions had already been augmented with helper
functions to have saturating behavior. Now Wasm.rules is always using
the new operation names and wasm/ssa.go is falling back to the helpers
if the feature is not enabled.
The feature is in phase 4 of the WebAssembly proposal process:
https://github.com/WebAssembly/meetings/blob/master/process/phases.md
More information on the feature can be found at:
https://github.com/WebAssembly/nontrapping-float-to-int-conversions/blob/master/proposals/nontrapping-float-to-int-conversion/Overview.md
Change-Id: Ic6c3688017054ede804b02b6b0ffd4a02ef33ad7
Reviewed-on: https://go-review.googlesource.com/c/go/+/170119
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
This change adds the GOWASM option "signext" to enable
the generation of experimental sign-extension operators.
The feature is in phase 4 of the WebAssembly proposal process:
https://github.com/WebAssembly/meetings/blob/master/process/phases.md
More information on the feature can be found at:
https://github.com/WebAssembly/sign-extension-ops/blob/master/proposals/sign-extension-ops/Overview.md
Change-Id: I6b30069390a8699fbecd9fb4d1d61e13c59b0333
Reviewed-on: https://go-review.googlesource.com/c/go/+/168882
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
This change adds the environment variable GOWASM, which is a comma
separated list of experimental WebAssembly features that the compiled
WebAssembly binary is allowed to use. The default is to use no
experimental features. Initially there are no features avaiable.
More information about feature proposals can be found at
https://github.com/WebAssembly/proposals
Change-Id: I4c8dc534c99ecff8bb075dded0186ca8f8decaef
Reviewed-on: https://go-review.googlesource.com/c/go/+/168881
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
ppc64{,le} processor level selection allows the compiler to generate instructions
targeting newer processors and processor-specific optimizations without breaking
compatibility with our current baseline. This feature introduces a new environment
variable, GOPPC64.
GOPPC64 is a GOARCH=ppc64{,le} specific option, for a choice between different
processor levels (i.e. Instruction Set Architecture versions) for which the
compiler will target. The default is 'power8'.
Change-Id: Ic152e283ae1c47084ece4346fa002a3eabb3bb9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/163758
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
|
|
Add an environment variable to make.bash to allow setting the default
dynamic linker/loader. This fixes alpine builds to use
/lib/ld-musl-x86_64.so.1:
$ readelf -l ../bin/go | grep 'interpreter:' | sed -e 's/^.*interpreter: \(.*\)[]]/\1/'
/lib/ld-musl-x86_64.so.1
Also re-enable the internal linker tests that were previously disabled
for alpine (CL 41759, CL 41678).
Fixes #18243
Updates #19938
This resurrects CL 50070 authored by Jessie Frazelle.
Change-Id: I132b5282045a3d60c8568e3b002a7f075eac2d93
Reviewed-on: https://go-review.googlesource.com/c/163977
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
This experiment is less effective and less needed since the
introduction of stack objects.
We can't clobber stack objects because we don't know statically
whether they are live or not.
We don't really need this experiment that much any more, as it was
primarily used to test the complicated ambiguously-live logic in the
liveness analysis, which has been removed in favor of stack objects.
It is also ~infeasible to maintain once we have safepoints everywhere.
Fixes #27326
Change-Id: I3bdde480b93dd508d048703055d4586b496176af
Reviewed-on: https://go-review.googlesource.com/c/151317
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Enabling GODEBUGCPU without the need to set GOEXPERIMENT=debugcpu enables
trybots and builders to run tests for GODEBUGCPU features in upcoming CLs
that will implement the new syntax and features for non-experimental
GODEBUGCPU support from proposal golang.org/issue/27218.
Updates #27218
Change-Id: Icc69e51e736711a86b02b46bd441ffc28423beba
Reviewed-on: https://go-review.googlesource.com/c/141817
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Supporting frame-pointer makes Linux's perf and other profilers much more useful
because it lets them gather a stack trace efficiently on profiling events. Major
changes include:
1. save FP on the word below where RSP is pointing to (proposed by Cherry and Austin)
2. adjust some specific offsets in runtime assembly and wrapper code
3. add support to FP in goroutine scheduler
4. adjust link stack overflow check to take the extra word into account
5. adjust nosplit test cases to enable frame sizes which are 16 bytes aligned
Performance impacts on go1 benchmarks:
Enable frame-pointer (by default)
name old time/op new time/op delta
BinaryTree17-46 5.94s ± 0% 6.00s ± 0% +1.03% (p=0.029 n=4+4)
Fannkuch11-46 2.84s ± 1% 2.77s ± 0% -2.58% (p=0.008 n=5+5)
FmtFprintfEmpty-46 55.0ns ± 1% 58.9ns ± 1% +7.06% (p=0.008 n=5+5)
FmtFprintfString-46 102ns ± 0% 105ns ± 0% +2.94% (p=0.008 n=5+5)
FmtFprintfInt-46 118ns ± 0% 117ns ± 1% -1.19% (p=0.000 n=4+5)
FmtFprintfIntInt-46 181ns ± 0% 182ns ± 1% ~ (p=0.444 n=5+5)
FmtFprintfPrefixedInt-46 215ns ± 1% 214ns ± 0% ~ (p=0.254 n=5+4)
FmtFprintfFloat-46 292ns ± 0% 296ns ± 0% +1.46% (p=0.029 n=4+4)
FmtManyArgs-46 720ns ± 0% 732ns ± 0% +1.72% (p=0.008 n=5+5)
GobDecode-46 9.82ms ± 1% 10.03ms ± 2% +2.10% (p=0.008 n=5+5)
GobEncode-46 8.14ms ± 0% 8.72ms ± 1% +7.14% (p=0.008 n=5+5)
Gzip-46 420ms ± 0% 424ms ± 0% +0.92% (p=0.008 n=5+5)
Gunzip-46 48.2ms ± 0% 48.4ms ± 0% +0.41% (p=0.008 n=5+5)
HTTPClientServer-46 201µs ± 4% 201µs ± 0% ~ (p=0.730 n=5+4)
JSONEncode-46 17.1ms ± 0% 17.7ms ± 1% +3.80% (p=0.008 n=5+5)
JSONDecode-46 88.0ms ± 0% 90.1ms ± 0% +2.42% (p=0.008 n=5+5)
Mandelbrot200-46 5.06ms ± 0% 5.07ms ± 0% ~ (p=0.310 n=5+5)
GoParse-46 5.04ms ± 0% 5.12ms ± 0% +1.53% (p=0.008 n=5+5)
RegexpMatchEasy0_32-46 117ns ± 0% 117ns ± 0% ~ (all equal)
RegexpMatchEasy0_1K-46 332ns ± 0% 329ns ± 0% -0.78% (p=0.008 n=5+5)
RegexpMatchEasy1_32-46 104ns ± 0% 113ns ± 0% +8.65% (p=0.029 n=4+4)
RegexpMatchEasy1_1K-46 563ns ± 0% 569ns ± 0% +1.10% (p=0.008 n=5+5)
RegexpMatchMedium_32-46 167ns ± 2% 177ns ± 1% +5.74% (p=0.008 n=5+5)
RegexpMatchMedium_1K-46 49.5µs ± 0% 53.4µs ± 0% +7.81% (p=0.008 n=5+5)
RegexpMatchHard_32-46 2.56µs ± 1% 2.72µs ± 0% +6.01% (p=0.008 n=5+5)
RegexpMatchHard_1K-46 77.0µs ± 0% 81.8µs ± 0% +6.24% (p=0.016 n=5+4)
Revcomp-46 631ms ± 1% 627ms ± 1% ~ (p=0.095 n=5+5)
Template-46 81.8ms ± 0% 86.3ms ± 0% +5.55% (p=0.008 n=5+5)
TimeParse-46 423ns ± 0% 432ns ± 0% +2.32% (p=0.008 n=5+5)
TimeFormat-46 478ns ± 2% 497ns ± 1% +3.89% (p=0.008 n=5+5)
[Geo mean] 71.6µs 73.3µs +2.45%
name old speed new speed delta
GobDecode-46 78.1MB/s ± 1% 76.6MB/s ± 2% -2.04% (p=0.008 n=5+5)
GobEncode-46 94.3MB/s ± 0% 88.0MB/s ± 1% -6.67% (p=0.008 n=5+5)
Gzip-46 46.2MB/s ± 0% 45.8MB/s ± 0% -0.91% (p=0.008 n=5+5)
Gunzip-46 403MB/s ± 0% 401MB/s ± 0% -0.41% (p=0.008 n=5+5)
JSONEncode-46 114MB/s ± 0% 109MB/s ± 1% -3.66% (p=0.008 n=5+5)
JSONDecode-46 22.0MB/s ± 0% 21.5MB/s ± 0% -2.35% (p=0.008 n=5+5)
GoParse-46 11.5MB/s ± 0% 11.3MB/s ± 0% -1.51% (p=0.008 n=5+5)
RegexpMatchEasy0_32-46 272MB/s ± 0% 272MB/s ± 1% ~ (p=0.190 n=4+5)
RegexpMatchEasy0_1K-46 3.08GB/s ± 0% 3.11GB/s ± 0% +0.77% (p=0.008 n=5+5)
RegexpMatchEasy1_32-46 306MB/s ± 0% 283MB/s ± 0% -7.63% (p=0.029 n=4+4)
RegexpMatchEasy1_1K-46 1.82GB/s ± 0% 1.80GB/s ± 0% -1.07% (p=0.008 n=5+5)
RegexpMatchMedium_32-46 5.99MB/s ± 0% 5.64MB/s ± 1% -5.77% (p=0.016 n=4+5)
RegexpMatchMedium_1K-46 20.7MB/s ± 0% 19.2MB/s ± 0% -7.25% (p=0.008 n=5+5)
RegexpMatchHard_32-46 12.5MB/s ± 1% 11.8MB/s ± 0% -5.66% (p=0.008 n=5+5)
RegexpMatchHard_1K-46 13.3MB/s ± 0% 12.5MB/s ± 1% -6.01% (p=0.008 n=5+5)
Revcomp-46 402MB/s ± 1% 405MB/s ± 1% ~ (p=0.095 n=5+5)
Template-46 23.7MB/s ± 0% 22.5MB/s ± 0% -5.25% (p=0.008 n=5+5)
[Geo mean] 82.2MB/s 79.6MB/s -3.26%
Disable frame-pointer (GOEXPERIMENT=noframepointer)
name old time/op new time/op delta
BinaryTree17-46 5.94s ± 0% 5.96s ± 0% +0.39% (p=0.029 n=4+4)
Fannkuch11-46 2.84s ± 1% 2.79s ± 1% -1.68% (p=0.008 n=5+5)
FmtFprintfEmpty-46 55.0ns ± 1% 55.2ns ± 3% ~ (p=0.794 n=5+5)
FmtFprintfString-46 102ns ± 0% 103ns ± 0% +0.98% (p=0.016 n=5+4)
FmtFprintfInt-46 118ns ± 0% 115ns ± 0% -2.54% (p=0.029 n=4+4)
FmtFprintfIntInt-46 181ns ± 0% 179ns ± 0% -1.10% (p=0.000 n=5+4)
FmtFprintfPrefixedInt-46 215ns ± 1% 213ns ± 0% ~ (p=0.143 n=5+4)
FmtFprintfFloat-46 292ns ± 0% 300ns ± 0% +2.83% (p=0.029 n=4+4)
FmtManyArgs-46 720ns ± 0% 739ns ± 0% +2.64% (p=0.008 n=5+5)
GobDecode-46 9.82ms ± 1% 9.78ms ± 1% ~ (p=0.151 n=5+5)
GobEncode-46 8.14ms ± 0% 8.12ms ± 1% ~ (p=0.690 n=5+5)
Gzip-46 420ms ± 0% 420ms ± 0% ~ (p=0.548 n=5+5)
Gunzip-46 48.2ms ± 0% 48.0ms ± 0% -0.33% (p=0.032 n=5+5)
HTTPClientServer-46 201µs ± 4% 199µs ± 3% ~ (p=0.548 n=5+5)
JSONEncode-46 17.1ms ± 0% 17.2ms ± 0% ~ (p=0.056 n=5+5)
JSONDecode-46 88.0ms ± 0% 88.6ms ± 0% +0.64% (p=0.008 n=5+5)
Mandelbrot200-46 5.06ms ± 0% 5.07ms ± 0% ~ (p=0.548 n=5+5)
GoParse-46 5.04ms ± 0% 5.07ms ± 0% +0.65% (p=0.008 n=5+5)
RegexpMatchEasy0_32-46 117ns ± 0% 112ns ± 4% -4.27% (p=0.016 n=4+5)
RegexpMatchEasy0_1K-46 332ns ± 0% 330ns ± 1% ~ (p=0.095 n=5+5)
RegexpMatchEasy1_32-46 104ns ± 0% 110ns ± 1% +5.29% (p=0.029 n=4+4)
RegexpMatchEasy1_1K-46 563ns ± 0% 567ns ± 2% ~ (p=0.151 n=5+5)
RegexpMatchMedium_32-46 167ns ± 2% 166ns ± 0% ~ (p=0.333 n=5+4)
RegexpMatchMedium_1K-46 49.5µs ± 0% 49.6µs ± 0% ~ (p=0.841 n=5+5)
RegexpMatchHard_32-46 2.56µs ± 1% 2.49µs ± 0% -2.81% (p=0.008 n=5+5)
RegexpMatchHard_1K-46 77.0µs ± 0% 75.8µs ± 0% -1.55% (p=0.008 n=5+5)
Revcomp-46 631ms ± 1% 628ms ± 0% ~ (p=0.095 n=5+5)
Template-46 81.8ms ± 0% 84.3ms ± 1% +3.05% (p=0.008 n=5+5)
TimeParse-46 423ns ± 0% 425ns ± 0% +0.52% (p=0.008 n=5+5)
TimeFormat-46 478ns ± 2% 478ns ± 1% ~ (p=1.000 n=5+5)
[Geo mean] 71.6µs 71.6µs -0.01%
name old speed new speed delta
GobDecode-46 78.1MB/s ± 1% 78.5MB/s ± 1% ~ (p=0.151 n=5+5)
GobEncode-46 94.3MB/s ± 0% 94.5MB/s ± 1% ~ (p=0.690 n=5+5)
Gzip-46 46.2MB/s ± 0% 46.2MB/s ± 0% ~ (p=0.571 n=5+5)
Gunzip-46 403MB/s ± 0% 404MB/s ± 0% +0.33% (p=0.032 n=5+5)
JSONEncode-46 114MB/s ± 0% 113MB/s ± 0% ~ (p=0.056 n=5+5)
JSONDecode-46 22.0MB/s ± 0% 21.9MB/s ± 0% -0.64% (p=0.008 n=5+5)
GoParse-46 11.5MB/s ± 0% 11.4MB/s ± 0% -0.64% (p=0.008 n=5+5)
RegexpMatchEasy0_32-46 272MB/s ± 0% 285MB/s ± 4% +4.74% (p=0.016 n=4+5)
RegexpMatchEasy0_1K-46 3.08GB/s ± 0% 3.10GB/s ± 1% ~ (p=0.151 n=5+5)
RegexpMatchEasy1_32-46 306MB/s ± 0% 290MB/s ± 1% -5.21% (p=0.029 n=4+4)
RegexpMatchEasy1_1K-46 1.82GB/s ± 0% 1.81GB/s ± 2% ~ (p=0.151 n=5+5)
RegexpMatchMedium_32-46 5.99MB/s ± 0% 6.02MB/s ± 1% ~ (p=0.063 n=4+5)
RegexpMatchMedium_1K-46 20.7MB/s ± 0% 20.7MB/s ± 0% ~ (p=0.659 n=5+5)
RegexpMatchHard_32-46 12.5MB/s ± 1% 12.8MB/s ± 0% +2.88% (p=0.008 n=5+5)
RegexpMatchHard_1K-46 13.3MB/s ± 0% 13.5MB/s ± 0% +1.58% (p=0.008 n=5+5)
Revcomp-46 402MB/s ± 1% 405MB/s ± 0% ~ (p=0.095 n=5+5)
Template-46 23.7MB/s ± 0% 23.0MB/s ± 1% -2.95% (p=0.008 n=5+5)
[Geo mean] 82.2MB/s 82.3MB/s +0.04%
Frame-pointer is enabled on Linux by default but can be disabled by setting: GOEXPERIMENT=noframepointer.
Fixes #10110
Change-Id: I1bfaca6dba29a63009d7c6ab04ed7a1413d9479e
Reviewed-on: https://go-review.googlesource.com/61511
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Needs the go compiler to be build with GOEXPERIMENT=debugcpu to be active.
The GODEBUGCPU environment variable can be used to disable usage of
specific processor features in the Go standard library.
This is useful for testing and benchmarking different code paths that
are guarded by internal/cpu variable checks.
Use of processor features can not be enabled through GODEBUGCPU.
To disable usage of AVX and SSE41 cpu features on GOARCH amd64 use:
GODEBUGCPU=avx=0,sse41=0
The special "all" option can be used to disable all options:
GODEBUGCPU=all=0
Updates #12805
Updates #15403
Change-Id: I699c2e6f74d98472b6fb4b1e5ffbf29b15697aab
Reviewed-on: https://go-review.googlesource.com/91737
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
mips64 softfloat support is based on mips implementation and introduces
new enviroment variable GOMIPS64.
GOMIPS64 is a GOARCH=mips64{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS64_{hardfloat,softfloat}'.
Change-Id: I7f73078627f7cb37c588a38fb5c997fe09c56134
Reviewed-on: https://go-review.googlesource.com/108475
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Suppose you build the Go toolchain in directory A,
move the whole thing to directory B, and then use
it from B to build a new program hello.exe, and then
run hello.exe, and hello.exe crashes with a stack
trace into the standard library.
Long ago, you'd have seen hello.exe print file names
in the A directory tree, even though the files had moved
to the B directory tree. About two years ago we changed
the compiler to write down these files with the name
"$GOROOT" (that literal string) instead of A, so that the
final link from B could replace "$GOROOT" with B,
so that hello.exe's crash would show the correct source
file paths in the stack trace. (golang.org/cl/18200)
Now suppose that you do the same thing but hello.exe
doesn't crash: it prints fmt.Println(runtime.GOROOT()).
And you run hello.exe after clearing $GOROOT from the
environment.
Long ago, you'd have seen hello.exe print A instead of B.
Before this CL, you'd still see hello.exe print A instead of B.
This case is the one instance where a moved toolchain
still divulges its origin. Not anymore. After this CL, hello.exe
will print B, because the linker sets runtime/internal/sys.DefaultGoroot
with the effective GOROOT from link time.
This makes the default result of runtime.GOROOT once again
match the file names recorded in the binary, after two years
of divergence.
With that cleared up, we can reintroduce GOROOT into the
link action ID and also reenable TestExecutableGOROOT/RelocatedExe.
When $GOROOT_FINAL is set during link, it is used
in preference to $GOROOT, as always, but it was easier
to explain the behavior above without introducing that
complication.
Fixes #22155.
Fixes #20284.
Fixes #22475.
Change-Id: Ifdaeb77fd4678fdb337cf59ee25b2cd873ec1016
Reviewed-on: https://go-review.googlesource.com/86835
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
GOMIPS is a GOARCH=mips{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS_{hardfloat,softfloat}'.
Note: GOMIPS will later also be used for a choice of MIPS instruction
set (mips32/mips32r2).
Updates #18162
Change-Id: I35417db8625695f09d6ccc3042431dd2eaa756a6
Reviewed-on: https://go-review.googlesource.com/37954
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
|
|
Framepointer is the default now. Only print an X: list
if the settings are _not_ the default.
Before:
$ go tool compile -V
compile version devel +a5f30d9508 Sun Jul 16 14:43:48 2017 -0400 X:framepointer
$ go1.8 tool compile -V
compile version go1.8 X:framepointer
$
After:
$ go tool compile -V
compile version devel +a5f30d9508 Sun Jul 16 14:43:48 2017 -0400
$ go1.9 tool compile -V # imagined
compile version go1.9
$
Perpetuates #18317.
Change-Id: I981ba5c62be32e650a166fc9740703122595639b
Reviewed-on: https://go-review.googlesource.com/49252
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
The experiment "clobberdead" clobbers all pointer fields that the
compiler thinks are dead, just before and after every safepoint.
Useful for debugging the generation of live pointer bitmaps.
Helped find the following issues:
Update #15936
Update #16026
Update #16095
Update #18860
Change-Id: Id1d12f86845e3d93bae903d968b1eac61fc461f9
Reviewed-on: https://go-review.googlesource.com/23924
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Now only cmd/asm and cmd/compile depend on cmd/internal/obj. Changing
the assembler backends no longer requires reinstalling cmd/link or
cmd/addr2line.
There's also now one canonical definition of the object file format in
cmd/internal/objabi/doc.go, with a warning to update all three
implementations.
objabi is still something of a grab bag of unrelated code (e.g., flag
and environment variable handling probably belong in a separate "tool"
package), but this is still progress.
Fixes #15165.
Fixes #20026.
Change-Id: Ic4b92fac7d0d35438e0d20c9579aad4085c5534c
Reviewed-on: https://go-review.googlesource.com/40972
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
|
