| Age | Commit message (Collapse) | Author |
|---|
|
The `get_multi_pack_index()` function is declared and implemented in the
packfile subsystem, even though it really belongs into the multi-pack
index subsystem. The reason for this is likely that it needs to call
`packfile_store_prepare()`, which is not exposed by the packfile system.
In a subsequent commit we're about to add another caller outside of the
packfile system though, so we'll have to expose the function anyway.
Do so now already and move `get_multi_pack_index()` into the MIDX
subsystem.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a recurring pattern where we essentially perform an upsert of a
packfile in case it isn't yet known by the packfile store. The logic to
do so is non-trivial as we have to reconstruct the packfile's key, check
the map of packfiles, then create the new packfile and finally add it to
the store.
Introduce a new function that does this dance for us. Refactor callsites
to use it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `install_packed_git()` functions adds a packfile to a specific
object store. Refactor it to accept a packfile store instead of a
repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `reprepare_packed_git()` we perform a couple of operations:
- We reload alternate object directories.
- We clear the loose object cache.
- We reprepare packfiles.
While the logic is hosted in "packfile.c", it clearly reaches into other
subsystems that aren't related to packfiles.
Split up the responsibility and introduce `odb_reprepare()` which now
becomes responsible for repreparing the whole object database. The
existing `reprepare_packed_git()` function is refactored accordingly and
only cares about reloading the packfile store now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks a cache of "kept" packfiles, which is used by
git-pack-objects(1) to handle cruft objects. With the introduction of
the `struct packfile_store` we have a better place to host this cache
though.
Move the cache accordingly.
This moves the last bit of packfile-related state from the object
database into the packfile store. Adapt the comment for the `packfiles`
pointer in `struct object_database` to reflect this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks the list of packfiles in most-recently-used
order, which is mostly used to favor reading from packfiles that contain
most of the objects that we're currently accessing. With the
introduction of the `struct packfile_store` we have a better place to
host this list though.
Move the list accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks a map of packfiles by their respective paths,
which is used to figure out whether a given packfile has already been
loaded. With the introduction of the `struct packfile_store` we have a
better place to host this list though.
Move the map accordingly.
`pack_map_entry_cmp()` isn't used anywhere but in "packfile.c" anymore
after this change, so we convert it to a static function, as well. Note
that we also drop the `inline` hint: the function is used as a callback
function exclusively, and callbacks cannot be inlined.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database knows to skip re-initializing the list of packfiles
in case it's already been initialized. Whether or not that is the case
is tracked via a separate `initialized` bit that is stored in the object
database. With the introduction of the `struct packfile_store` we have a
better place to host this bit though.
Move it accordingly. While at it, convert the field into a boolean now
that we're allowed to use them in our code base.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks the list of packfiles it currently knows
about. With the introduction of the `struct packfile_store` we have a
better place to host this list though.
Move the list accordingly. Extract the logic from `odb_clear()` that
knows to close all such packfiles and move it into the new subsystem, as
well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Information about an object database's packfiles is currently
distributed across two different structures:
- `struct packed_git` contains the `next` pointer as well as the
`mru_head`, both of which serve to store the list of packfiles.
- `struct object_database` contains several fields that relate to the
packfiles.
So we don't really have a central data structure that tracks our
packfiles, and consequently responsibilities aren't always clear cut.
A consequence for the upcoming pluggable object databases is that this
makes it very hard to move management of packfiles from the object
database level down into the object database source.
Introduce a new `struct packfile_store` which is about to become the
single source of truth for managing packfiles. Right now this data
structure doesn't yet contain anything, but in subsequent patches we
will move all data structures that relate to packfiles and that are
currently contained in `struct object_database` into this new home.
Note that this is only a first step: most importantly, we won't (yet)
move the `struct packed_git::next` pointer around. This will happen in a
subsequent patch series though so that `struct packed_git` will really
only host information about the specific packfile it represents.
Further note that the new structure still sits at the wrong level at the
end of this patch series: as mentioned, it should eventually sit at the
level of the object database source, not at the object database level.
But introducing the packfile store now already makes it way easier to
eventually push down the now-selfcontained data structure by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `get_multi_pack_index()` loads multi-pack indices via
`prepare_packed_git()` and then returns the linked list of multi-pack
indices that is stored in `struct object_database`. That list is in the
process of being removed though in favor of storing the MIDX as part of
the object database source it belongs to.
Refactor `get_multi_pack_index()` so that it returns the multi-pack
index for a single object source. Callers are now expected to call this
function for each source they are interested in. This requires them to
iterate through alternates, so we have to prepare alternate object
sources before doing so.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `raw_object_store` structure is the central entry point for reading
and writing objects in a repository. The main purpose of this structure
is to manage object directories and provide an interface to access and
write objects in those object directories.
Right now, many of the functions associated with the raw object store
implicitly rely on `the_repository` to get access to its `objects`
pointer, which is the `raw_object_store`. As we want to generally get
rid of using `the_repository` across our codebase we will have to
convert this implicit dependency on this global variable into an
explicit parameter.
This conversion can be done by simply passing in an explicit pointer to
a repository and then using its `->objects` pointer. But there is a
second effort underway, which is to make the object subsystem more
selfcontained so that we can eventually have pluggable object backends.
As such, passing in a repository wouldn't make a ton of sense, and the
goal is to convert the object store interfaces such that we always pass
in a reference to the `raw_object_store` instead.
This will expose the `raw_object_store` type to a lot more callers
though, which surfaces that this type is named somewhat awkwardly. The
"raw_" prefix makes readers wonder whether there is a non-raw variant of
the object store, but there isn't. Furthermore, we nowadays want to name
functions in a way that they can be clearly attributed to a specific
subsystem, but calling them e.g. `raw_object_store_has_object()` is just
too unwieldy, even when dropping the "raw_" prefix.
Instead, rename the structure to `object_database`. This term is already
used a lot throughout our codebase, and it cannot easily be mistaken for
"object directories", either. Furthermore, its acronym ODB is already
well-known and works well as part of a function's name, like for example
`odb_has_object()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We carry declarations for a couple of functions in "object-store.h" that
are not defined in "object-store.c", but in a different subsystem. Move
these declarations to the respective headers whose matching code files
carry the corresponding definition.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store.h" header contains the definition of `struct
packed_git`. As this structure hosts all kind of information about a
specific packfile it is arguably a bit out of place in a generic place
like "object-store.h".
Move the structure as well as `pack_map_entry_cmp()` into "packfile.h".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once an object is written into a cruft pack, we can only freshen it by
writing a new loose or packed copy of that object with a more recent
mtime.
Prior to 61568efa95 (builtin/pack-objects.c: support `--max-pack-size`
with `--cruft`, 2023-08-28), we typically had at most one cruft pack in
a repository at any given time. So freshening unreachable objects was
straightforward when already rewriting the cruft pack (and its *.mtimes
file).
But 61568efa95 changes things: 'pack-objects' now supports writing
multiple cruft packs when invoked with `--cruft` and the
`--max-pack-size` flag. Cruft packs are rewritten until they reach some
size threshold, at which point they are considered "frozen", and will
only be modified in a pruning GC, or if the threshold itself is
adjusted.
Prior to this patch, however, this process breaks down when we attempt
to freshen an object packed in an earlier cruft pack, and that cruft
pack is larger than the threshold and thus will survive the repack.
When this is the case, it is impossible to freshen objects in cruft
pack(s) when those cruft packs are larger than the threshold. This is
because we would avoid writing them in the new cruft pack entirely, for
a couple of reasons.
1. When enumerating packed objects via 'add_objects_in_unpacked_packs()'
we pass the SKIP_IN_CORE_KEPT_PACKS, which is used to avoid looping
over the packs we're going to retain (which are marked as kept
in-core by 'read_cruft_objects()').
This means that we will avoid enumerating additional packed copies
of objects found in any cruft packs which are larger than the given
size threshold. Thus there is no opportunity to call
'create_object_entry()' whatsoever.
2. We likewise will discard the loose copy (if one exists) of any
unreachable object packed in a cruft pack that is larger than the
threshold. Here our call path is 'add_unreachable_loose_objects()',
which uses the 'add_loose_object()' callback.
That function will eventually land us in 'want_object_in_pack()'
(via 'add_cruft_object_entry()'), and we'll discard the object as it
appears in one of the packs which we marked as kept in-core.
This means in effect that it is impossible to freshen an unreachable
object once it appears in a cruft pack larger than the given threshold.
Instead, we should pack an additional copy of an unreachable object we
want to freshen even if it appears in a cruft pack, provided that the
cruft copy has an mtime which is before the mtime of the copy we are
trying to pack/freshen. This is sub-optimal in the sense that it
requires keeping an additional copy of unreachable objects upon
freshening, but we don't have a better alternative without the ability
to make in-place modifications to existing *.mtimes files.
In order to implement this, we have to adjust the behavior of
'want_found_object()'. When 'pack-objects' is told that we're *not*
going to retain any cruft packs (i.e. the set of packs marked as kept
in-core does not contain a cruft pack), the behavior is unchanged.
But when there *is* at least one cruft pack that we're holding onto, it
is no longer sufficient to reject a copy of an object found in that
cruft pack for that reason alone. In this case, we only want to reject a
candidate object when copies of that object either:
- exists in a non-cruft pack that we are retaining, regardless of that
pack's mtime, or
- exists in a cruft pack with an mtime at least as recent as the copy
we are debating whether or not to pack, in which case freshening
would be redundant.
To do this, keep track of whether or not we have any cruft packs in our
in-core kept list with a new 'ignore_packed_keep_in_core_has_cruft'
flag. When we end up in this new special case, we replace a call to
'has_object_kept_pack()' to 'want_cruft_object_mtime()', and only reject
objects when we have a copy in an existing cruft pack with at least as
recent an mtime as our candidate (in which case "freshening" would be
redundant).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was possible for "git unpack-objects" and "git index-pack" to
make an unaligned access, which has been corrected.
* jk/pack-header-parse-alignment-fix:
index-pack, unpack-objects: use skip_prefix to avoid magic number
index-pack, unpack-objects: use get_be32() for reading pack header
parse_pack_header_option(): avoid unaligned memory writes
packfile: factor out --pack_header argument parsing
bswap.h: squelch potential sparse -Wcast-truncate warnings
|
|
Both index-pack and unpack-objects accept a --pack_header argument. This
is an undocumented internal argument used by receive-pack and fetch to
pass along information about the header of the pack, which they've
already read from the incoming stream.
In preparation for a bugfix, let's factor the duplicated code into a
common helper.
The callers are still responsible for identifying the option. While this
could likewise be factored out, it is more flexible this way (e.g., if
they ever started using parse-options and wanted to handle both the
stuck and unstuck forms).
Likewise, the callers are responsible for reporting errors, though they
both just call die(). I've tweaked unpack-objects to match index-pack in
marking the error for translation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The variables `packed_git_window_size` and `packed_git_limit` are global
config variables used in the `packfile.c` file. Since it is only used in
this file, let's change it from being a global config variable to a
local variable for the subsystem.
With this, we rid `packfile.c` from all global variable usage and this
means we can also remove the `USE_THE_REPOSITORY_VARIABLE` guard from
the file.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `for_each_packed_object` currently relies on the global
variable `the_repository`. To eliminate global variable usage in
`packfile.c`, we should progressively shift the dependency on
the_repository to higher layers. Let's remove its usage from this
function and closely related function `is_promisor_object`.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions `has_object[_kept]_pack` currently rely on the global
variable `the_repository`. To eliminate global variable usage in
`packfile.c`, we should progressively shift the dependency on
the_repository to higher layers. Let's remove its usage from these
functions and any related ones.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `odb_pack_name` currently relies on the global variable
`the_repository`. To eliminate global variable usage in `packfile.c`, we
should progressively shift the dependency on the_repository to higher
layers.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The struct `packed_git` holds information regarding a packed object
file. Let's add the repository variable to this object, to represent the
repository that this packfile belongs to. This helps remove dependency
on the global `the_repository` object in `packfile.c` by simply using
repository information now readily available in the struct.
We do need to consider that a packfile could be part of the alternates
of a repository, but considering that we only have one repository struct
and also that we currently anyways use 'the_repository', we should be
OK with this change.
We also modify `alloc_packed_git` to ensure that the repository is added
to newly created `packed_git` structs. This requires modifying the
function and all its callee to pass the repository object down the
levels.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main function we use to search a pack index for an object is
find_pack_entry_one(). That function still takes a bare pointer to the
hash, despite the fact that its underlying bsearch_pack() function needs
an object_id struct. And so we end up making an extra copy of the hash
into the struct just to do a lookup.
As it turns out, all callers but one already have such an object_id. So
we can just take a pointer to that struct and use it directly. This
avoids the extra copy and provides a more type-safe interface.
The one exception is get_delta_base() in packfile.c, when we are chasing
a REF_DELTA from inside the pack (and thus we have a pointer directly to
the mmap'd pack memory, not a struct). We can just bump the hashcpy()
from inside find_pack_entry_one() to this one caller that needs it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The find_sha1_pack() function has a few problems:
- it's badly named, since it works with any object hash
- it takes the hash as a bare pointer rather than an object_id struct
We can fix both of these easily, as all callers actually have a real
object_id anyway.
I also found the existence of this function somewhat confusing, as it is
about looking in an arbitrary set of linked packed_git structs. It's
good for things like dumb-http which are looking in downloaded remote
packs, and not our local packs. But despite the name, it is not a good
way to find the pack which contains a local object (it skips the use of
the midx, the pack mru list, and so on).
So let's also add an explanatory comment above the declaration that may
point people in the right direction.
I suspect the calls in fast-import.c, which use the packed_git list from
the repository struct, could actually just be using find_pack_entry().
But since we'd need to keep it anyway for dumb-http, I didn't dig
further there. If we eventually drop dumb-http support, then it might be
worth examining them to see if we can get rid of the function entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
With a name like parse_packed_git(), you might think it's the right way
to access a local pack index and its associated objects. But not so!
It's a one-off used by the dumb-http code to access pack idx files we've
downloaded from the remote, but whose packs we might not have.
There's only one caller left for this function, and ideally we'd drop it
completely and just inline it there. But that would require exposing
other internals from packfile.[ch], like alloc_packed_git() and
check_packed_git_idx().
So let's leave it be for now, and just warn people that it's probably
not what they're looking for. Perhaps in the long run if we eventually
drop dumb-http support, we can remove the function entirely then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Like sha1_pack_name() that we dropped in the previous commit, this
function uses an error-prone static strbuf and the somewhat misleading
name "sha1".
The only caller left is in pack-redundant.c. While this command is
marked for potential removal in our BreakingChanges document, we still
have it for now. But it's simple enough to convert it to use its own
strbuf with the underlying odb_pack_name() function, letting us drop the
otherwise obsolete function.
Note that odb_pack_name() does its own strbuf_reset(), so it's safe to
use directly within a loop like this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The sha1_pack_name() function has a few ugly bits:
- it writes into a static strbuf (and not even a ring buffer of them),
which can lead to subtle invalidation problems
- it uses the term "sha1", but it's really using the_hash_algo, which
could be sha256
There's only one caller of it left. And in fact that caller is better
off using the underlying odb_pack_name() function itself, since it's
just copying the result into its own strbuf anyway.
Converting that caller lets us get rid of this now-obselete function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The has_pack_index() function has several oddities that may make it
surprising if you are trying to find out if we have a pack with some
$hash:
- it is not looking for a valid pack that we found while searching
object directories. It just looks for any pack-$hash.idx file in the
pack directory.
- it only looks in the local directory, not any alternates
- it takes a bare "unsigned char" hash, which we try to avoid these
days
The only caller it has is in the dumb http code; it wants to know if we
already have the pack idx in question. This can happen if we downloaded
the pack (and generated its index) during a previous fetch.
Before the previous patch ("dumb-http: store downloaded pack idx as
tempfile"), it could also happen if we downloaded the .idx from the
remote but didn't get the matching .pack. But since that patch, we don't
hold on to those .idx files. So there's no need to look for the .idx
file in the filesystem; we can just scan through the packed_git list to
see if we have it.
That lets us simplify the dumb http code a bit, as we know that if we
have the .idx we have the matching .pack already. And it lets us get rid
of this odd function that is unlikely to be needed again.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Now that the rest of the MIDX subsystem and relevant callers have been
updated to learn about how to read and process incremental MIDX chains,
let's finally update the implementation in `write_midx_internal()` to be
able to write incremental MIDX chains.
This new feature is available behind the `--incremental` option for the
`multi-pack-index` builtin, like so:
$ git multi-pack-index write --incremental
The implementation for doing so is relatively straightforward, and boils
down to a handful of different kinds of changes implemented in this
patch:
- The `compute_sorted_entries()` function is taught to reject objects
which appear in any existing MIDX layer.
- Functions like `write_midx_revindex()` are adjusted to write
pack_order values which are offset by the number of objects in the
base MIDX layer.
- The end of `write_midx_internal()` is adjusted to move
non-incremental MIDX files when necessary (i.e. when creating an
incremental chain with an existing non-incremental MIDX in the
repository).
There are a handful of other changes that are introduced, like new
functions to clear incremental MIDX files that are unrelated to the
current chain (using the same "keep_hash" mechanism as in the
non-incremental case).
The tests explicitly exercising the new incremental MIDX feature are
relatively limited for two reasons:
1. Most of the "interesting" behavior is already thoroughly covered in
t5319-multi-pack-index.sh, which handles the core logic of reading
objects through a MIDX.
The new tests in t5334-incremental-multi-pack-index.sh are mostly
focused on creating and destroying incremental MIDXs, as well as
stitching their results together across layers.
2. A new GIT_TEST environment variable is added called
"GIT_TEST_MULTI_PACK_INDEX_WRITE_INCREMENTAL", which modifies the
entire test suite to write incremental MIDXs after repacking when
combined with the "GIT_TEST_MULTI_PACK_INDEX" variable.
This exercises the long tail of other interesting behavior that is
defined implicitly throughout the rest of the CI suite. It is
likewise added to the linux-TEST-vars job.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "hash-ll.h" header was introduced via d1cbe1e6d8 (hash-ll.h: split
out of hash.h to remove dependency on repository.h, 2023-04-22) to make
explicit the split between hash-related functions that rely on the
global `the_repository`, and those that don't. This split is no longer
necessary now that we we have removed the reliance on `the_repository`.
Merge "hash-ll.h" back into "hash.h". This causes some code units to not
include "repository.h" anymore, which requires us to add some forward
declarations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One parameter is called `file_pach`. On the face of it, this looks as if
it was supposed to talk about a `path` instead of a `pach`.
However, looking at the way this callback is called, it gets fed the
`d_name` from a directory entry, which provides just the file name, not
the full path. Therefore, let's fix this by calling the parameter
`file_name` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"packfile.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* tb/pack-revindex-on-disk-cleanup:
packfile: make `close_pack_revindex()` static
|
|
Since its definition in 2f4ba2a867 (packfile: prepare for the existence
of '*.rev' files, 2021-01-25), the only caller of
`close_pack_revindex()` was within packfile.c.
Thus there is no need for this to be exposed via packfile.h, and instead
can remain static within packfile.c's compilation unit. While we're
here, move the function's opening brace onto its own line.
Noticed-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The single caller has a full object ID, so pass it on instead of just
its hash member.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All callers have full object IDs, so pass them on instead of just their
hash member.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Future callers will want a function to fill a 'struct pack_entry' for a
given object id but _only_ from its position in any kept pack(s).
In particular, an new 'git repack' mode which ensures the resulting
packs form a geometric progress by object count will mark packs that it
does not want to repack as "kept in-core", and it will want to halt a
reachability traversal as soon as it visits an object in any of the kept
packs. But, it does not want to halt the traversal at non-kept, or
.keep packs.
The obvious alternative is 'find_pack_entry()', but this doesn't quite
suffice since it only returns the first pack it finds, which may or may
not be kept (and the mru cache makes it unpredictable which one you'll
get if there are options).
Short of that, you could walk over all packs looking for the object in
each one, but it scales with the number of packs, which may be
prohibitive.
Introduce 'find_kept_pack_entry()', a function which is like
'find_pack_entry()', but only fills in objects in the kept packs.
Handle packs which have .keep files, as well as in-core kept packs
separately, since certain callers will want to distinguish one from the
other. (Though on-disk and in-core kept packs share the adjective
"kept", it is best to think of the two sets as independent.)
There is a gotcha when looking up objects that are duplicated in kept
and non-kept packs, particularly when the MIDX stores the non-kept
version and the caller asked for kept objects only. This could be
resolved by teaching the MIDX to resolve duplicates by always favoring
the kept pack (if one exists), but this breaks an assumption in existing
MIDXs, and so it would require a format change.
The benefit to changing the MIDX in this way is marginal, so we instead
have a more thorough check here which is explained with a comment.
Callers will be added in subsequent patches.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Specify the format of the on-disk reverse index 'pack-*.rev' file, as
well as prepare the code for the existence of such files.
The reverse index maps from pack relative positions (i.e., an index into
the array of object which is sorted by their offsets within the
packfile) to their position within the 'pack-*.idx' file. Today, this is
done by building up a list of (off_t, uint32_t) tuples for each object
(the off_t corresponding to that object's offset, and the uint32_t
corresponding to its position in the index). To convert between pack and
index position quickly, this array of tuples is radix sorted based on
its offset.
This has two major drawbacks:
First, the in-memory cost scales linearly with the number of objects in
a pack. Each 'struct revindex_entry' is sizeof(off_t) +
sizeof(uint32_t) + padding bytes for a total of 16.
To observe this, force Git to load the reverse index by, for e.g.,
running 'git cat-file --batch-check="%(objectsize:disk)"'. When asking
for a single object in a fresh clone of the kernel, Git needs to
allocate 120+ MB of memory in order to hold the reverse index in memory.
Second, the cost to sort also scales with the size of the pack.
Luckily, this is a linear function since 'load_pack_revindex()' uses a
radix sort, but this cost still must be paid once per pack per process.
As an example, it takes ~60x longer to print the _size_ of an object as
it does to print that entire object's _contents_:
Benchmark #1: git.compile cat-file --batch <obj
Time (mean ± σ): 3.4 ms ± 0.1 ms [User: 3.3 ms, System: 2.1 ms]
Range (min … max): 3.2 ms … 3.7 ms 726 runs
Benchmark #2: git.compile cat-file --batch-check="%(objectsize:disk)" <obj
Time (mean ± σ): 210.3 ms ± 8.9 ms [User: 188.2 ms, System: 23.2 ms]
Range (min … max): 193.7 ms … 224.4 ms 13 runs
Instead, avoid computing and sorting the revindex once per process by
writing it to a file when the pack itself is generated.
The format is relatively straightforward. It contains an array of
uint32_t's, the length of which is equal to the number of objects in the
pack. The ith entry in this table contains the index position of the
ith object in the pack, where "ith object in the pack" is determined by
pack offset.
One thing that the on-disk format does _not_ contain is the full (up to)
eight-byte offset corresponding to each object. This is something that
the in-memory revindex contains (it stores an off_t in 'struct
revindex_entry' along with the same uint32_t that the on-disk format
has). Omit it in the on-disk format, since knowing the index position
for some object is sufficient to get a constant-time lookup in the
pack-*.idx file to ask for an object's offset within the pack.
This trades off between the on-disk size of the 'pack-*.rev' file for
runtime to chase down the offset for some object. Even though the lookup
is constant time, the constant is heavier, since it can potentially
involve two pointer walks in v2 indexes (one to access the 4-byte offset
table, and potentially a second to access the double wide offset table).
Consider trying to map an object's pack offset to a relative position
within that pack. In a cold-cache scenario, more page faults occur while
switching between binary searching through the reverse index and
searching through the *.idx file for an object's offset. Sure enough,
with a cold cache (writing '3' into '/proc/sys/vm/drop_caches' after
'sync'ing), printing out the entire object's contents is still
marginally faster than printing its size:
Benchmark #1: git.compile cat-file --batch-check="%(objectsize:disk)" <obj >/dev/null
Time (mean ± σ): 22.6 ms ± 0.5 ms [User: 2.4 ms, System: 7.9 ms]
Range (min … max): 21.4 ms … 23.5 ms 41 runs
Benchmark #2: git.compile cat-file --batch <obj >/dev/null
Time (mean ± σ): 17.2 ms ± 0.7 ms [User: 2.8 ms, System: 5.5 ms]
Range (min … max): 15.6 ms … 18.2 ms 45 runs
(Numbers taken in the kernel after cheating and using the next patch to
generate a reverse index). There are a couple of approaches to improve
cold cache performance not pursued here:
- We could include the object offsets in the reverse index format.
Predictably, this does result in fewer page faults, but it triples
the size of the file, while simultaneously duplicating a ton of data
already available in the .idx file. (This was the original way I
implemented the format, and it did show
`--batch-check='%(objectsize:disk)'` winning out against `--batch`.)
On the other hand, this increase in size also results in a large
block-cache footprint, which could potentially hurt other workloads.
- We could store the mapping from pack to index position in more
cache-friendly way, like constructing a binary search tree from the
table and writing the values in breadth-first order. This would
result in much better locality, but the price you pay is trading
O(1) lookup in 'pack_pos_to_index()' for an O(log n) one (since you
can no longer directly index the table).
So, neither of these approaches are taken here. (Thankfully, the format
is versioned, so we are free to pursue these in the future.) But, cold
cache performance likely isn't interesting outside of one-off cases like
asking for the size of an object directly. In real-world usage, Git is
often performing many operations in the revindex (i.e., asking about
many objects rather than a single one).
The trade-off is worth it, since we will avoid the vast majority of the
cost of generating the revindex that the extra pointer chase will look
like noise in the following patch's benchmarks.
This patch describes the format and prepares callers (like in
pack-revindex.c) to be able to read *.rev files once they exist. An
implementation of the writer will appear in the next patch, and callers
will gradually begin to start using the writer in the patches that
follow after that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a repository has an alternate object directory configured, callers
can traverse through each alternate's MIDX by walking the '->next'
pointer.
But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it
places the new ones at the front of this pointer chain, not at the end.
This can be confusing for callers such as 'git repack -ad', causing test
failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'.
The occurs when dropping a pack known to the local MIDX with alternates
configured that have their own MIDX. Since the alternate's MIDX is
returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns
true (which is correct, since it traverses through the '->next' pointer
to find the MIDX in the chain that does contain the requested object).
But, we call 'clear_midx_file()' on 'the_repository', which drops the
MIDX at the path of the first MIDX in the chain, which (in the case of
t7700.6 is the one in the alternate).
This patch addresses that by:
- placing the local MIDX first in the chain when calling
'prepare_multi_pack_index_one()', and
- introducing a new 'get_local_multi_pack_index()', which explicitly
returns the repository-local MIDX, if any.
Don't impose an additional order on the MIDX's '->next' pointer beyond
that the first item in the chain must be local if one exists so that we
avoid a quadratic insertion.
Likewise, use 'get_local_multi_pack_index()' in
'remove_redundant_pack()' to fix the formerly broken t7700.6 when run
with 'GIT_TEST_MULTI_PACK_INDEX=1'.
Finally, note that the MIDX ordering invariant is only preserved by the
insertion order in 'prepare_packed_git()', which traverses through the
ODB's '->next' pointer, meaning we visit the local object store first.
This fragility makes this an undesirable long-term solution if more
callers are added, but it is acceptable for now since this is the only
caller.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, nth_packed_object_sha1() was the primary way to get
the oid of a packfile's index position. But these days we have the more
type-safe nth_packed_object_id() wrapper, and all callers have been
converted.
Let's drop the "sha1" version (turning the safer wrapper into a single
function) so that nobody is tempted to introduce new callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our nth_packed_object_sha1() function returns NULL for error. So when we
wrapped it with nth_packed_object_oid(), we kept the same semantics. But
it's a bit funny, because the caller actually passes in an out
parameter, and the pointer we return is just that same struct they
passed to us (or NULL).
It's not too terrible, but it does make the interface a little
non-idiomatic. Let's switch to our usual "0 for success, negative for
error" return value. Most callers either don't check it, or are
trivially converted. The one that requires the biggest change is
actually improved, as we can ditch an extra aliased pointer variable.
Since we are changing the interface in a subtle way that the compiler
wouldn't catch, let's also change the name to catch any topics in
flight. We can drop the 'o' and make it nth_packed_object_id(). That's
slightly shorter, but also less redundant since the 'o' stands for
"object" already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "git pack-objects" reuses objects stored in existing pack
to generate its result has been improved.
* jk/packfile-reuse-cleanup:
pack-bitmap: don't rely on bitmap_git->reuse_objects
pack-objects: add checks for duplicate objects
pack-objects: improve partial packfile reuse
builtin/pack-objects: introduce obj_is_packed()
pack-objects: introduce pack.allowPackReuse
csum-file: introduce hashfile_total()
pack-bitmap: simplify bitmap_has_oid_in_uninteresting()
pack-bitmap: uninteresting oid can be outside bitmapped packfile
pack-bitmap: introduce bitmap_walk_contains()
ewah/bitmap: introduce bitmap_word_alloc()
packfile: expose get_delta_base()
builtin/pack-objects: report reused packfile objects
|
|
In a following commit get_delta_base() will be used outside
packfile.c, so let's make it non static and declare it in
packfile.h.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ds/midx-expire-repack:
packfile.h: drop extern from function declaration
|
|
In 336226c259 (packfile.h: drop extern from function declarations,
2019-04-05), `extern` was removed from function declarations because
it's redundant. However, in 8434e85d5f (repack: refactor pack deletion
for future use, 2019-06-10), an `extern` was mistakenly included.
Remove this spurious `extern`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git multi-pack-index" learned expire and repack subcommands.
* ds/midx-expire-repack:
t5319: use 'test-tool path-utils' instead of 'ls -l'
t5319-multi-pack-index.sh: test batch size zero
midx: add test that 'expire' respects .keep files
multi-pack-index: test expire while adding packs
midx: implement midx_repack()
multi-pack-index: prepare 'repack' subcommand
multi-pack-index: implement 'expire' subcommand
midx: refactor permutation logic and pack sorting
midx: simplify computation of pack name lengths
multi-pack-index: prepare for 'expire' subcommand
Docs: rearrange subcommands for multi-pack-index
repack: refactor pack deletion for future use
|
