| Age | Commit message (Collapse) | Author |
|---|
|
__git_complete_refs is the main function used for completing references.
It is primarily used as a wrapper around __git_refs, and is easier to
extend since its arguments are option-like.
One major downside of __git_complete_refs and __git_refs currently, is
the lack of ability to complete only a subset of refs such as branches
(refs/heads) or tags (refs/tags).
Normally, a caller might just decide to use __git_heads() or
__git_tags(). However, in the case of git-switch, it is useful to
complete both branches *and* DWIM remote branch names.
Due to the complexity and implementation of __git_refs, it is not easy
to extend it to support listing only a subset of references.
Instead, we can extend __git_complete_refs to do this. For this to be
done, we must first ensure that "--dwim" support is not tied to calling
__git_refs.
Instead of passing $dwim into __git_refs, we can implement
a __gitcomp_direct_append function which can append to COMPREPLY after
a call to __gitcomp_direct.
If --dwim is passed to __git_complete_refs, use __gitcomp_direct_append
to add the output of __git_dwim_remote_heads to the completion list.
In this way, --dwim support is now independent of calling __git_refs.
A future change will add an additional option to control what set of
references __git_complete_refs will output.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
__git_refs() has the ability to report unique remote names for
supporting completion of remote branch names for the DWIMery of git
checkout and git switch.
For git checkout, this is fine, because it always supports completing
all local references.
However, git switch by default only supports either switching branches
or using this DWIMery to create a local branch tracking the remote
branch.
Future work to cleanup and improve completion support for git switch
will be aided if the remote branch names can be completed separately
from __git_refs.
Extract this logic to a function __git_dwim_remote_heads(), and use it
in __git_refs.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The __git_complete_refs uses the "--track" option to specify when to
enable listing of unique remote branches which are used by the DWIM
logic of git checkout and git switch.
Using the term '--track' here is confusing because the git commands
themselves have '--track' as an argument. Additionally, the completion
logic for _git_switch also checks for --track. Keeping the meaning of
track_opt and --track for __git_complete_refs straight from the --track
git switch and git checkout option is difficult when reading this code.
Use the option '--dwim' instead, indicating this is about enabling or
disabling logic related to DWIM mode. Also rename the local variable
track_opt to dwim_opt to further reduce the confusion when reading the
completion code for _git_switch.
Because it is plausible for users to have developed their own
completions which rely on __git_complete_ref, keep --track as a synonym
for --dwim, even though we no longer use it in any of the core git
completion logic. Add a comment explaining why it remains as an
alternative spelling for --dwim.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When clearing the builtin operations on re-sourcing in the ZSH case we
can use the native ${parameters} associative array keys values to get
the currently `__gitcomp_builtin_*` operations using pattern matching
instead of using sed.
As also stated in commit 94408dc7, introducing this change the usage of
sed has some overhead implications, while ZSH can do this check just
using its native syntax.
Signed-off-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
df70b190 (completion: make stash -p and alias for stash push -p,
2018-04-20) wanted to make sure "git stash -p <TAB>" offers the same
completion as "git stash push -p <TAB>", but it did so by forcing the
$subcommand to be "push" whenever then "-p" option is found on the
command line.
This harms any subcommand that can take the "-p" option---even when the
subcommand is explicitly given, e.g. "git stash show -p", the code added
by the change would overwrite the $subcommand the user gave us.
Fix it by making sure that the defaulting to "push" happens only when
there is no $subcommand given yet.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The directory traversal code had redundant recursive calls which
made its performance characteristics exponential with respect to
the depth of the tree, which was corrected.
* en/fill-directory-exponential:
completion: fix 'git add' on paths under an untracked directory
Fix error-prone fill_directory() API; make it only return matches
dir: replace double pathspec matching with single in treat_directory()
dir: include DIR_KEEP_UNTRACKED_CONTENTS handling in treat_directory()
dir: replace exponential algorithm with a linear one
dir: refactor treat_directory to clarify control flow
dir: fix confusion based on variable tense
dir: fix broken comment
dir: consolidate treat_path() and treat_one_path()
dir: fix simple typo in comment
t3000: add more testcases testing a variety of ls-files issues
t7063: more thorough status checking
|
|
Add missing 'restore' and 'switch' sub commands to zsh completion
candidate output. E.g.
$ git re<tab>
rebase -- forward-port local commits to the updated upstream head
reset -- reset current HEAD to the specified state
restore -- restore working tree files
$ git s<tab>
show -- show various types of objects
status -- show the working tree status
switch -- switch branches
Signed-off-by: Terry Moschou <tmoschou@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported on the git mailing list, since git-2.25,
git add untracked-dir/
has been tab completing to
git add untracked-dir/./
The cause for this was that with commit b9670c1f5e (dir: fix checks on
common prefix directory, 2019-12-19),
git ls-files -o --directory untracked-dir/
(or the equivalent `git -C untracked-dir ls-files -o --directory`) began
reporting
untracked-dir/
instead of listing paths underneath that directory. It may also be
worth noting that the real command in question was
git -C untracked-dir ls-files -o --directory '*'
which is equivalent to
git ls-files -o --directory 'untracked-dir/*'
which behaves the same for the purposes of this issue (the '*' can match
the empty string), but becomes relevant for the proposed fix.
At first, based on the report, I decided to try to view this as a
regression and tried to find a way to recover the old behavior without
breaking other stuff, or at least breaking as little as possible.
However, in the end, I couldn't figure out a way to do it that wouldn't
just cause lots more problems than it solved. The old behavior was a
bug:
* Although older git would avoid cleaning anything with `git clean -f
.git`, it would wipe out everything under that direcotry with `git
clean -f .git/`. Despite the difference in command used, this is
relevant because the exact same change that fixed clean changed the
behavior of ls-files.
* Older git would report different results based solely on presence or
absence of a trailing slash for $SUBDIR in the command `git ls-files
-o --directory $SUBDIR`.
* Older git violated the documented behavior of not recursing into
directories that matched the pathspec when --directory was
specified.
* And, after all, commit b9670c1f5e (dir: fix checks on common prefix
directory, 2019-12-19) didn't overlook this issue; it explicitly
stated that the behavior of the command was being changed to bring
it inline with the docs.
(Also, if it helps, despite that commit being merged during the 2.25
series, this bug was not reported during the 2.25 cycle, nor even during
most of the 2.26 cycle -- it was reported a day before 2.26 was
released. So the impact of the change is at least somewhat small.)
Instead of relying on a bug of ls-files in reporting the wrong content,
change the invocation of ls-files used by git-completion to make it grab
paths one depth deeper. Do this by changing '$DIR/*' (match $DIR/ plus
0 or more characters) into '$DIR/?*' (match $DIR/ plus 1 or more
characters). Note that the '?' character should not be added when
trying to complete a filename (e.g. 'git ls-files -o --directory
"merge.c?*"' would not correctly return "merge.c" when such a file
exists), so we have to make sure to add the '?' character only in cases
where the path specified so far is a directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completion update.
* kk/complete-diff-color-moved:
completion: add diff --color-moved[-ws]
|
|
"git am --short-current-patch" is a way to show the piece of e-mail
for the stopped step, which is not suitable to directly feed "git
apply" (it is designed to be a good "git am" input). It learned a
new option to show only the patch part.
* pb/am-show-current-patch:
am: support --show-current-patch=diff to retrieve .git/rebase-apply/patch
am: support --show-current-patch=raw as a synonym for--show-current-patch
am: convert "resume" variable to a struct
parse-options: convert "command mode" to a flag
parse-options: add testcases for OPT_CMDMODE()
|
|
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
|
|
These options are available since git v2.15, but somehow
eluded from the completion script.
Note that while --color-moved-ws= accepts comma-separated
list of values, there is no (easy?) way to make it work
with completion (see e.g. [1]).
[1]: https://github.com/scop/bash-completion/issues/240
Acked-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the past, we had different prompts for different types of rebases:
REBASE: for am-based rebases
REBASE-m: for merge-based rebases
REBASE-i: for interactive-based rebases
It's not clear why this distinction was necessary or helpful; when the
prompt was added in commit e75201963f67 ("Improve bash prompt to detect
various states like an unfinished merge", 2007-09-30), it simply added
these three different types. Perhaps there was a useful purpose back
then, but there have been some changes:
* The merge backend was deleted after being implemented on top of the
interactive backend, causing the prompt for merge-based rebases to
change from REBASE-m to REBASE-i.
* The interactive backend is used for multiple different types of
non-interactive rebases, so the "-i" part of the prompt doesn't
really mean what it used to.
* Rebase backends have gained more abilities and have a great deal of
overlap, sometimes making it hard to distinguish them.
* Behavioral differences between the backends have also been ironed
out.
* We want to change the default backend from am to interactive, which
means people would get "REBASE-i" by default if we didn't change
the prompt, and only if they specified --am or --whitespace or -C
would they get the "REBASE" prompt.
* In the future, we plan to have "--whitespace", "-C", and even "--am"
run the interactive backend once it can handle everything the
am-backend can.
For all these reasons, make the prompt for any type of rebase just be
"REBASE".
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* mt/sparse-checkout-doc-update:
completion: add support for sparse-checkout
doc: sparse-checkout: mention --cone option
|
|
The command line completion (in contrib/) learned to complete
subcommands and arguments to "git worktree".
* sg/completion-worktree:
completion: list paths and refs for 'git worktree add'
completion: list existing working trees for 'git worktree' subcommands
completion: simplify completing 'git worktree' subcommands and options
completion: return the index of found word from __git_find_on_cmdline()
completion: clean up the __git_find_on_cmdline() helper function
t9902-completion: add tests for the __git_find_on_cmdline() helper
|
|
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Complete paths after 'git worktree add <TAB>' and refs after 'git
worktree add -b <TAB>' and 'git worktree add some/dir <TAB>'.
Uncharacteristically for a Git command, 'git worktree add' takes a
mandatory path parameter before a commit-ish as its optional last
parameter. In addition, it has both standalone --options and options
with a mandatory unstuck parameter ('-b <new-branch>'). Consequently,
trying to complete refs for that last optional commit-ish parameter
resulted in a more convoluted than usual completion function, but
hopefully all the included comments will make it not too hard to
digest.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Complete the paths of existing working trees for 'git worktree's
'move', 'remove', 'lock', and 'unlock' subcommands.
Note that 'git worktree list --porcelain' shows absolute paths, so for
simplicity's sake we'll complete full absolute paths as well (as
opposed to turning them into relative paths by finding common leading
directories between $PWD and the working tree's path and removing
them, risking trouble with symbolic links or Windows drive letters; or
completing them one path component at a time).
Never list the path of the main working tree, as it cannot be moved,
removed, locked, or unlocked.
Ideally we would only list unlocked working trees for the 'move',
'remove', and 'lock' subcommands, and only locked ones for 'unlock'.
Alas, 'git worktree list --porcelain' doesn't indicate which working
trees are locked, so for now we'll complete the paths of all existing
working trees.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion function for 'git worktree' uses separate but very
similar case arms to complete --options for each subcommand.
Combine these into a single case arm to avoid repetition.
Note that after this change we won't complete 'git worktree remove's
'--force' option, but that is consistent with our general stance on
not offering '--force', as it should be used with care.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the __git_find_on_cmdline() helper function so far we've
only been interested in which one of a set of words appear on the
command line. To complete options for some of 'git worktree's
subcommands in the following patches we'll need not only that, but the
index of that word on the command line as well.
Extend __git_find_on_cmdline() to optionally show the index of the
found word on the command line (IOW in the $words array) when the
'--show-idx' option is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The __git_find_on_cmdline() helper function started its life as
__git_find_subcommand() [1], but it served a more general purpose than
looking for subcommands, so later it was renamed accordingly [2].
However, that rename didn't touch the body of the function, and left
the $subcommand local variable behind, still reminiscent of the
function's original purpose.
Let's clean up the names of __git_find_on_cmdline()'s local variables
and get rid of that $subcommand variable name.
While at it, add a short comment describing the function's purpose.
[1] 3ff1320d4b (bash: refactor searching for subcommands on the
command line, 2008-03-10),
[2] 918c03c2a7 (bash: rename __git_find_subcommand() to
__git_find_on_cmdline(), 2009-09-15)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
|
|
"git submodule" learned a subcommand "set-url".
* dl/submodule-set-url:
submodule: teach set-url subcommand
|
|
The completion script (in contrib/) has been taught that "git svn"
supports the "--recursive" option.
* js/complete-svn-recursive:
completion: tab-complete "git svn --recursive"
|
|
The completion script (in contrib/) learned that the "--onto"
option of "git rebase" can take its argument as the value of the
option.
* dl/complete-rebase-onto:
completion: learn to complete `git rebase --onto=`
|
|
The standard format for referencing other commits within some projects
(such as git.git) is the reference format. This is described in
Documentation/SubmittingPatches as
If you want to reference a previous commit in the history of a stable
branch, use the format "abbreviated hash (subject, date)", like this:
....
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that ...
....
Since this format is so commonly used, standardize it as a pretty
format.
The tests that are implemented essentially show that the format-string
does not change in response to various log options. This is useful
because, for future developers, it shows that we've considered the
limitations of the "canned format-string" approach and we are fine with
them.
Based-on-a-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: James Shubin <james@shubin.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2b9bd488ae ("completion: teach rebase to use __gitcomp_builtin",
2019-09-12), the completion script learned to complete rebase using
__gitcomp_builtin(). However, this resulted in `--onto=` being suggested
instead of `--onto `.
Before, when there was a space, we'd start a new word and, as a result,
fallback to __git_complete_refs() and `--onto` would be completed this
way. However, now we match the `--*` case which does not know how to
offer completions for refs.
Teach _git_rebase() to complete refs in the `--onto=` case so that we
fix this regression.
Reported-by: Paul Jolly <paul@myitcv.io>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, in the event that a submodule's upstream URL changes, users
have to manually alter the URL in the .gitmodules file then run
`git submodule sync`. Let's make that process easier.
Teach submodule the set-url subcommand which will automatically change
the `submodule.$name.url` property in the .gitmodules file and then run
`git submodule sync` to complete the process.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The installation instruction for zsh completion script (in
contrib/) has been a bit improved.
* mb/clarify-zsh-completion-doc:
completion: clarify installation instruction for zsh
|
|
The original comment does not describe type of ~/.zsh/_git explicitly
and zsh does not warn or fail if a user create it as a dictionary.
So unexperienced users could be misled by the original comment.
There is a small update to clarify it.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Maxim Belsky <public.belsky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completion updates.
* mr/complete-more-for-log-etc:
completion: add missing completions for log, diff, show
|
|
The command line completion for "git archive" and "git rebase" are
now made less prone to go out of sync with the binary.
* dl/complete-rebase-and-archive:
completion: teach archive to use __gitcomp_builtin
completion: teach rebase to use __gitcomp_builtin
|
|
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
|
|
The command line completion support (in contrib/) learned about the
"--skip" option of "git revert" and "git cherry-pick".
* dl/complete-cherry-pick-revert-skip:
status: mention --skip for revert and cherry-pick
completion: add --skip for cherry-pick and revert
completion: merge options for cherry-pick and revert
|
|
Currently, _git_archive() uses a hardcoded list of options for its
completion. However, we can use __gitcomp_builtin() to get a dynamically
generated list of completions instead.
Teach _git_archive() to use __gitcomp_builtin() so that newly
implemented options in archive will be automatically completed without
any mucking around in git-completion.bash. While we're at it, teach it
to complete the missing `--worktree-attributes` option as well.
Unfortunately, since some args are passed through from cmd_archive() to
write_archive() (which calls parse_archive_args()), there's no way that a
`--git-completion-helper` arg can end up reaching parse_archive_args()
since the first call to parse_options() will end up calling exit(0). As
a result, we have to carry the options supported by write_archive() in
the hardcoded string.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, _git_rebase() uses a hardcoded list of options for its
completion. However, we can use __gitcomp_builtin() to get a dynamically
generated list of completions instead.
Teach _git_rebase() to use __gitcomp_builtin() so that newly implemented
options in rebase will be automatically completed without any mucking
around in git-completion.bash.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bash completion script knows some options to "git log" and
"git show" only in the positive form, (e.g. "--abbrev-commit"), but not
in their negative form (e.g. "--no-abbrev-commit"). Add them.
Also, the bash completion script is missing some other options to
"git diff", and "git show" (and thus, all other commands that take
"git diff"'s options). Add them. Of note, since "--indent-heuristic" is
no longer experimental, add that too.
Signed-off-by: Max Rothman <max.r.rothman@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though `--skip` is a valid command-line option for cherry-pick and
revert while they are in progress, it is not completed. Add this missing
option to the completion script.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since revert and cherry-pick share the same sequencer code, they should
both accept the same command-line options. Derive the
`__git_cherry_pick_inprogress_options` and
`__git_revert_inprogress_options` variables from
`__git_sequencer_inprogress_options` so that the options aren't
unnecessarily duplicated twice.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completing configuration sections and variable names for the stuck
argument of 'git clone --config=<TAB>' requires a bit of extra care
compared to doing the same for the unstuck argument of 'git clone
--config <TAB>', because we have to deal with that '--config=' being
part of the current word to be completed.
Add an option to the __git_complete_config_variable_name_and_value()
and in turn to the __git_complete_config_variable_name() helper
functions to specify the current section/variable name to be
completed, so they can be used even when completing the stuck argument
of '--config='.
__git_complete_config_variable_value() already has such an option, and
thus no further changes were necessary to complete possible values
after 'git clone --config=section.name=<TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commits taught the completion script how to complete
configuration section, variable names, and their valus after 'git -c
<TAB>', and with a bit of foresight encapsulated all that in a
dedicated helper function. Use that function to complete the unstuck
argument of 'git config -c|--config <TAB>', which expect configuration
variables and values in the same 'section.name=value' form.
Note that handling the struck argument for 'git clone --config=<TAB>'
requires some extra care, so it will be done a separate patch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git config' expects a configuration variable's name and value in
separate options, so we complete values as they stand on their own on
the command line. 'git -c', however, expects them in a single option
joined by a '=' character, so we should be able to complete values
when they are following 'section.name=' in the same word.
Add new options to the __git_complete_config_variable_value() function
to allow callers to specify the current word to be completed and the
configuration variable whose value is to be completed, and use these
to complete possible values after 'git -c 'section.name=<TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
