| Age | Commit message (Collapse) | Author |
|---|
|
The completion script (in contrib/) learned more options that can
be used with "git log".
* pb/complete-log-more:
completion: complete missing 'git log' options
completion: complete --encoding
completion: complete --patch-with-raw
completion: complete missing rev-list options
|
|
Some options specific to 'git log' are missing from the Bash completion
script. Add them to _git_log.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option --encoding is supported by 'git log' and 'git show', so add
it to __git_log_show_options.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some options listed in rev-list-options.txt, and thus accepted by 'git
log' and friends, are missing from the Bash completion script.
Add them to __git_log_common_options.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `__git_pseudoref_exists ()` helper function back to git-rev-parse(1)
in case the reftable backend is in use. This is not in the same spirit
as the simple existence check that the "files" backend does though,
because there we only check for the pseudo-ref to exist with `test -f`.
With git-rev-parse(1) we not only check for existence, but also verify
that the pseudo-ref resolves to an object, which may not be the case
when the pseudo-ref points to an unborn branch.
Fix this issue by using `git show-ref --exists` instead. Note that we do
not have to silence stdout anymore as git-show-ref(1) will not print
anything.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 44dbb3bf29 (completion: support pseudoref existence checks for
reftables, 2023-12-19), we have extended the Bash completion script to
support future ref backends better by using git-rev-parse(1) to check
for pseudo-ref existence. This conversion has introduced a bug, because
even though we pass `--quiet` to git-rev-parse(1) it would still output
the resolved object ID of the ref in question if it exists.
Fix this by redirecting its stdout to `/dev/null` and add a test that
catches this behaviour. Note that the test passes even without the fix
for the "files" backend because we parse pseudo refs via the filesystem
directly in that case. But the test will fail with the "reftable"
backend.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the existence check along the following lines:
- Stop stripping the "ref :" prefix and compare to the expected value
directly. This allows us to drop a now-unused variable that was
previously leaking into the user's shell.
- Mark the "head" variable as local so that we don't leak its value
into the user's shell.
- Stop manually handling the `-C $__git_repo_path` option, which the
`__git ()` wrapper aleady does for us.
- In simlar spirit, stop redirecting stderr, which is also handled by
the wrapper already.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The helper function `__git_pseudoref_exists ()` expects that the repo
path has already been discovered by its callers, which makes for a
rather fragile calling convention. Refactor the function to discover the
repo path itself to make it more self-contained, which also removes the
need to discover the path in some of its callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line completion script (in contrib/) learned to work better
with the reftable backend.
* sh/completion-with-reftable:
completion: support pseudoref existence checks for reftables
completion: refactor existence checks for pseudorefs
|
|
In contrib/completion/git-completion.bash, there are a bunch of
instances where we read pseudorefs, such as HEAD, MERGE_HEAD,
REVERT_HEAD, and others via the filesystem. However, the upcoming
reftable refs backend won't use '.git/HEAD' at all but instead will
write an invalid refname as placeholder for backwards compatibility,
which will break the git-completion script.
Update the '__git_pseudoref_exists' function to:
1. Recognize the placeholder '.git/HEAD' written by the reftable
backend (its content is specified in the reftable specs).
2. If reftable is in use, use 'git rev-parse' to determine whether the
given ref exists.
3. Otherwise, continue to use 'test -f' to check for the ref's filename.
Signed-off-by: Stan Hu <stanhu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for the reftable backend, this commit introduces a
'__git_pseudoref_exists' function that continues to use 'test -f' to
determine whether a given pseudoref exists in the local filesystem.
Signed-off-by: Stan Hu <stanhu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is tempting to think of "files and directories" of the current
directory as valid inputs to the add and set subcommands of git
sparse-checkout. However, in non-cone mode, they often aren't and using
them as potential completions leads to *many* forms of confusion:
Issue #1. It provides the *wrong* files and directories.
For
git sparse-checkout add
we always want to add files and directories not currently in our sparse
checkout, which means we want file and directories not currently present
in the current working tree. Providing the files and directories
currently present is thus always wrong.
For
git sparse-checkout set
we have a similar problem except in the subset of cases where we are
trying to narrow our checkout to a strict subset of what we already
have. That is not a very common scenario, especially since it often
does not even happen to be true for the first use of the command; for
years we required users to create a sparse-checkout via
git sparse-checkout init
git sparse-checkout set <args...>
(or use a clone option that did the init step for you at clone time).
The init command creates a minimal sparse-checkout with just the
top-level directory present, meaning the set command has to be used to
expand the checkout. Thus, only in a special and perhaps unusual cases
would any of the suggestions from normal file and directory completion
be appropriate.
Issue #2: Suggesting patterns that lead to warnings is unfriendly.
If the user specifies any regular file and omits the leading '/', then
the sparse-checkout command will warn the user that their command is
problematic and suggest they use a leading slash instead.
Issue #3: Completion gets confused by leading '/', and provides wrong paths.
Users often want to anchor their patterns to the toplevel of the
repository, especially when listing individual files. There are a
number of reasons for this, but notably even sparse-checkout encourages
them to do so (as noted above). However, if users do so (via adding a
leading '/' to their pattern), then bash completion will interpret the
leading slash not as a request for a path at the toplevel of the
repository, but as a request for a path at the root of the filesytem.
That means at best that completion cannot help with such paths, and if
it does find any completions, they are almost guaranteed to be wrong.
Issue #4: Suggesting invalid patterns from subdirectories is unfriendly.
There is no per-directory equivalent to .gitignore with
sparse-checkouts. There is only a single worktree-global
$GIT_DIR/info/sparse-checkout file. As such, paths to files must be
specified relative to the toplevel of a repository. Providing
suggestions of paths that are relative to the current working directory,
as bash completion defaults to, is wrong when the current working
directory is not the worktree toplevel directory.
Issue #5: Paths with special characters will be interpreted incorrectly
The entries in the sparse-checkout file are patterns, not paths. While
most paths also qualify as patterns (though even in such cases it would
be better for users to not use them directly but prefix them with a
leading '/'), there are a variety of special characters that would need
special escaping beyond the normal shell escaping: '*', '?', '\', '[',
']', and any leading '#' or '!'. If completion suggests any such paths,
users will likely expect them to be treated as an exact path rather than
as a pattern that might match some number of files other than 1.
However, despite the first four issues, we can note that _if_ users are
using tab completion, then they are probably trying to specify a path in
the index. As such, we transform their argument into a top-level-rooted
pattern that matches such a file. For example, if they type:
git sparse-checkout add Make<TAB>
we could "complete" to
git sparse-checkout add /Makefile
or, if they ran from the Documentation/technical/ subdirectory:
git sparse-checkout add m<TAB>
we could "complete" it to:
git sparse-checkout add /Documentation/technical/multi-pack-index.txt
Note in both cases I use "complete" in quotes, because we actually add
characters both before and after the argument in question, so we are
kind of abusing "bash completions" to be "bash completions AND
beginnings".
The fifth issue is a bit stickier, especially when you consider that we
not only need to deal with escaping issues because of special meanings
of patterns in sparse-checkout & gitignore files, but also that we need
to consider escaping issues due to ls-files needing to sometimes quote
or escape characters, and because the shell needs to escape some
characters. The multiple interacting forms of escaping could get ugly;
this patch makes no attempt to do so and simply documents that we
decided to not deal with those corner cases for now but at least get the
common cases right.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "set" and "add" subcommands of "sparse-checkout", when in cone mode,
should only complete on directories. For bash_completion in general,
when no completions are returned for any subcommands, it will often fall
back to standard completion of files and directories as a substitute.
That is not helpful here. Since we have already looked for all valid
completions, if none are found then falling back to standard bash file
and directory completion is at best actively misleading. In fact, there
are three different ways it can be actively misleading. Add a long
comment in the code about how that fallback behavior can deceive, and
disable the fallback by returning a fake result as the sole completion.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
_git_sparse_checkout() was checking whether we were in cone mode by
checking whether either:
A) core.sparseCheckoutCone was "true"
B) "--cone" was specified on the command line
This code has 2 bugs I didn't catch in my review at the time
1) core.sparseCheckout must be "true" for core.sparseCheckoutCone to
be relevant (which matters since "git sparse-checkout disable"
only unsets core.sparseCheckout, not core.sparseCheckoutCone)
2) The presence of "--no-cone" should override any config setting
Further, I forgot to update this logic as part of 2d95707a02
("sparse-checkout: make --cone the default", 2022-04-22) for the new
default.
Update the code for the new default and make it be more careful in
determining whether to complete based on cone mode or non-cone mode.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If, in the root of a project, one types
git sparse-checkout set --cone ../<TAB>
then an error message of the form
fatal: ../: '../' is outside repository at '/home/newren/floss/git'
is written to stderr, which munges the users view of their own command.
Squelch such messages by using the __git() wrapper, designed for this
purpose; see commit e15098a314 (completion: consolidate silencing errors
from git commands, 2017-02-03) for more on the wrapper.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'--dd' only makes sense for 'git log' and 'git show', so add it to
__git_log_show_options which is referenced in the completion for these
two commands.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently we started to tell users to spell ": git foo ;" with
space(s) around 'foo' for an alias to be completed similarly
to the 'git foo' command. It however is easy to also allow users to
spell it in a more natural way with the semicolon attached to 'foo',
i.e. ": git foo;". Also, add a comment to note that 'git' is optional
and writing ": foo;" would complete the alias just fine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify how "alias.foo = : git cmd ; aliased-command-string" should
be spelled with necessary whitespaces around punctuation marks to
work.
* pb/completion-aliases-doc:
completion: improve doc for complex aliases
|
|
The command-line complation support (in contrib/) learned to
complete "git commit --trailer=" for possible trailer keys.
* pb/complete-commit-trailers:
completion: commit: complete trailers tokens more robustly
completion: commit: complete configured trailer tokens
|
|
The completion script (in contrib/) has been taught to treat the
"-t" option to "git checkout" and "git switch" just like the
"--track" option, to complete remote-tracking branches.
* js/complete-checkout-t:
completion(switch/checkout): treat --track and -t the same
|
|
The completion code can be told to use a particular completion for
aliases that shell out by using ': git <cmd> ;' as the first command of
the alias. This only works if <cmd> and the semicolon are separated by a
space, since if the space is missing __git_aliased_command returns (for
example) 'checkout;' instead of just 'checkout', and then
__git_complete_command fails to find a completion for 'checkout;'.
The examples have that space but it's not clear if it's just for
style or if it's mandatory. Explicitly mention it.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit, we added support for completing configured
trailer tokens in 'git commit --trailer'.
Make the implementation more robust by:
- using '__git' instead of plain 'git', as the rest of the completion
script does
- using a stricter pattern for --get-regexp to avoid false hits
- using 'cut' and 'rev' instead of 'awk' to account for tokens including
dots.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `git switch --track ` is to be completed, only remote refs are
eligible because that is what the `--track` option targets.
And when the short-hand `-t` is used instead, the same _should_ happen.
Let's make it so.
Note that the bug exists both in the completions of `switch` and
`completion`, even if it manifests in slightly different ways: While
the completion of `git switch -t ` will not even look at remote refs,
the completion of `git checkout -t ` will look at both remote _and_
local refs. Both should look only at remote refs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 2daae3d1d1 (commit: add --trailer option, 2021-03-23), 'git
commit' can add trailers to commit messages. To make that feature more
pleasant to use at the command line, update the Bash completion code to
offer configured trailer tokens.
Add a __git_trailer_tokens function to list the configured trailers
tokens, and use it in _git_commit to suggest the configured tokens,
suffixing the completion words with ':' so that the user only has to add
the trailer value.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completion updates.
* pb/complete-diff-options: (24 commits)
diff.c: mention completion above add_diff_options
completion: complete --remerge-diff
completion: complete --diff-merges, its options and --no-diff-merges
completion: move --pickaxe-{all,regex} to __git_diff_common_options
completion: complete --ws-error-highlight
completion: complete --unified
completion: complete --output-indicator-{context,new,old}
completion: complete --output
completion: complete --no-stat
completion: complete --no-relative
completion: complete --line-prefix
completion: complete --ita-invisible-in-index and --ita-visible-in-index
completion: complete --irreversible-delete
completion: complete --ignore-matching-lines
completion: complete --function-context
completion: complete --find-renames
completion: complete --find-object
completion: complete --find-copies
completion: complete --default-prefix
completion: complete --compact-summary
...
|
|
--remerge-diff only makes sense for 'git log' and 'git show', so add it
to __git_log_show_options which is referenced in the completion for
these two commands.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The flags --[no-]diff-merges only make sense for 'git log' and 'git
show', so add a new variable __git_log_show_options for options only
relevant to these two commands, and add them there. Also add
__git_diff_merges_opts and list the accepted values for --diff-merges,
and use it in _git_log and _git_show.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The options --pickaxe-all and --pickaxe-regex are listed in
__git_diff_difftool_options and repeated in _git_log. Move them to
__git_diff_common_options instead, which makes them available
automatically in the completion of other commands referencing this
variable.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --ws-error-highlight= to the list in __git_diff_common_options, and
add the accepted values in a new list __git_ws_error_highlight_opts.
Use __git_ws_error_highlight_opts in _git_diff, _git_log and _git_show
to offer the accepted values.
As noted in fd0bc17557 (completion: add diff --color-moved[-ws],
2020-02-21), there is no easy way to offer completion for several
comma-separated values, so this is limited to completing a single
value.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --no-relative to __git_diff_common_options in the completion script,
and move --relative from __git_diff_difftool_options to
__git_diff_common_options since it applies to more than just diff and
difftool.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The options --ita-invisible-in-index and --ita-visible-in-index are
listed in diff-options.txt and so are included in the documentation of
commands which include this file (diff, diff-*, log, show, format-patch)
but they only make sense for diffs relating to the index. As such, add
them to '__git_diff_difftool_options' instead of
'__git_diff_common_options' since it makes more sense to add them there.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add descriptive comments for '__git_diff_common_options' and
'__git_diff_difftool_options', so that it is clearer when looking at
these variables to know in which command's completion they are used.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pseudoref AUTO_MERGE is documented since the previous commit. To
make it easier to use, let __git_refs in the Bash completion code
complete it.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
