| Age | Commit message (Collapse) | Author |
|---|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `ref_transaction_update()` obtains ref information and
flags to create a `ref_update` and add them to the transaction at hand.
To extend symref support in transactions, we need to also accept the
old and new ref targets and process it. This commit adds the required
parameters to the function and modifies all call sites.
The two parameters added are `new_target` and `old_target`. The
`new_target` is used to denote what the reference should point to when
the transaction is applied. Some functions allow this parameter to be
NULL, meaning that the reference is not changed.
The `old_target` denotes the value the reference must have before the
update. Some functions allow this parameter to be NULL, meaning that the
old value of the reference is not checked.
We also update the internal function `ref_transaction_add_update()`
similarly to take the two new parameters.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A config parser callback function fell through instead of returning
after recognising and processing a variable, wasting cycles, which
has been corrected.
* ds/fetch-config-parse-microfix:
fetch: return when parsing submodule.recurse
|
|
When parsing config keys, the normal pattern is to return 0 after
completing the logic for a specific config key, since no other key will
match. One instance, for "submodule.recurse", was missing this case in
builtin/fetch.c.
This is a very minor change, and will have minimal impact to
performance. This particular block was edited recently in 56e8bb4fb4
(fetch: use `fetch_config` to store "fetch.recurseSubmodules" value,
2023-05-17), which led to some hesitation that perhaps this omission was
on purpose.
However, no later cases within git_fetch_config() will match the key if
equal to "submodule.recurse" and neither will any key matches within the
catch-all git_default_config().
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure failure return from merge_bases_many() is properly caught.
* js/merge-base-with-missing-commit:
merge-ort/merge-recursive: do report errors in `merge_submodule()`
merge-recursive: prepare for `merge_submodule()` to report errors
commit-reach(repo_get_merge_bases_many_dirty): pass on errors
commit-reach(repo_get_merge_bases_many): pass on "missing commits" errors
commit-reach(get_octopus_merge_bases): pass on "missing commits" errors
commit-reach(repo_get_merge_bases): pass on "missing commits" errors
commit-reach(get_merge_bases_many_0): pass on "missing commits" errors
commit-reach(merge_bases_many): pass on "missing commits" errors
commit-reach(paint_down_to_common): start reporting errors
commit-reach(paint_down_to_common): prepare for handling shallow commits
commit-reach(repo_in_merge_bases_many): report missing commits
commit-reach(repo_in_merge_bases_many): optionally expect missing commits
commit-reach(paint_down_to_common): plug two memory leaks
|
|
Some functions in Git's source code follow the convention that returning
a negative value indicates a fatal error, e.g. repository corruption.
Let's use this convention in `repo_in_merge_bases()` to report when one
of the specified commits is missing (i.e. when `repo_parse_commit()`
reports an error).
Also adjust the callers of `repo_in_merge_bases()` to handle such
negative return values.
Note: As of this patch, errors are returned only if any of the specified
merge heads is missing. Over the course of the next patches, missing
commits will also be reported by the `paint_down_to_common()` function,
which is called by `repo_in_merge_bases_many()`, and those errors will
be properly propagated back to the caller at that stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using strncmp() and strlen() to check whether a string starts with
another one requires repeating the prefix candidate. Use starts_with()
instead, which reduces repetition and is more readable.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" learned to pay attention to "fetch.all" configuration
variable, which pretends as if "--all" was passed from the command
line when no remote parameter was given.
* tb/fetch-all-configuration:
fetch: add new config option fetch.all
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Introduce a boolean configuration option fetch.all which allows to
fetch all available remotes by default. The config option can be
overridden by explicitly specifying a remote or by using --no-all.
The behavior for --all is unchanged and calling git-fetch with --all
and a remote will still result in an error.
Additionally, describe the configuration variable in the config
documentation and implement new tests to cover the expected behavior.
Also add --no-all to the command-line documentation of git-fetch.
Signed-off-by: Tamino Bauknecht <dev@tb6.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an error occurs during an atomic fetch, a redundant error message
will appear at the end of do_fetch(). It was introduced in b3a804663c
(fetch: make `--atomic` flag cover backfilling of tags, 2022-02-17).
Because a failure message is displayed before setting retcode in the
function do_fetch(), calling error() on the err message at the end of
this function may result in redundant or empty error message to be
displayed.
We can remove the redundant error() function, because we know that
the function ref_transaction_abort() never fails. While we can find a
common pattern for calling ref_transaction_abort() by running command
"git grep -A1 ref_transaction_abort", e.g.:
if (ref_transaction_abort(transaction, &error))
error("abort: %s", error.buf);
Following this pattern, we can tolerate the return value of the function
ref_transaction_abort() being changed in the future. We also delay the
output of the err message to the end of do_fetch() to reduce redundant
code. With these changes, the test case "fetch porcelain output
(atomic)" in t5574 will also be fixed.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42-part2:
parse-options: mark unused parameters in noop callback
interpret-trailers: mark unused "unset" parameters in option callbacks
parse-options: add more BUG_ON() annotations
merge: do not pass unused opt->value parameter
parse-options: mark unused "opt" parameter in callbacks
parse-options: prefer opt->value to globals in callbacks
checkout-index: delay automatic setting of to_tempfile
format-patch: use OPT_STRING_LIST for to/cc options
merge: simplify parsing of "-n" option
merge: make xopts a strvec
|
|
We have several parse-options callbacks that ignore their "opt"
parameters entirely. This is a little unusual, as we'd normally put the
result of the parsing into opt->value. In the case of these callbacks,
though, they directly manipulate global variables instead (and in
most cases the caller sets opt->value to NULL in the OPT_CALLBACK
declaration).
The immediate symptom we'd like to deal with is that the unused "opt"
variables trigger -Wunused-parameter. But how to fix that is debatable.
One option is to annotate them with UNUSED. But another is to have the
caller pass in the appropriate variable via opt->value, and use it. That
has the benefit of making the callbacks reusable (in theory at least),
and makes it clear from the OPT_CALLBACK declaration which variables
will be affected (doubly so for the cases in builtin/fast-export.c,
where we do set opt->value, but it is completely ignored!).
The slight downside is that we lose type safety, since they're now
passing through void pointers.
I went with the "just use them" approach here. The loss of type safety
is unfortunate, but that is already an issue with most of the other
callbacks. If we want to try to address that, we should do so more
consistently (and this patch would prepare these callbacks for whatever
we choose to do there).
Note that in the cases in builtin/fast-export.c, we are passing
anonymous enums. We'll have to give them names so that we can declare
the appropriate pointer type within the callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this callback is just trying to collect the set of queued tag
updates, there is no need for it to look at old_oid at all. Mark it as
unused to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fixes.
* jc/transport-parseopt-fix:
fetch: reject --no-ipv[46]
parse-options: introduce OPT_IPVERSION()
|
|
The command line option parsing for "git clone", "git fetch", and
"git push" have duplicated implementations of parsing "--ipv4" and
"--ipv6" options, by having two OPT_SET_INT() for "ipv4" and "ipv6".
Introduce a new OPT_IPVERSION() macro and use it in these three
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the parsed "submodule.fetchJobs" config value into the
`fetch_config` structure. This reduces our reliance on global variables
and further unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the parsed "fetch.parallel" config value into the `fetch_config`
structure. This reduces our reliance on global variables and further
unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the parsed "fetch.recurseSubmodules" config value into the
`fetch_config` structure. This reduces our reliance on global variables
and further unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the parsed "fetch.showForcedUpdaets" config value into the
`fetch_config` structure. This reduces our reliance on global variables
and further unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the parsed "fetch.pruneTags" config value into the `fetch_config`
structure. This reduces our reliance on global variables and further
unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the parsed "fetch.prune" config value into the `fetch_config`
structure. This reduces our reliance on global variables and further
unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `fetch_config` structure currently only has a single member, which
is the `display_format`. We're about extend it to contain all parsed
config values and will thus need it available in most of the code.
Prepare for this change by passing through the `fetch_config` directly
instead of only passing its single member.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop the `NULL` check for `remote_ref` in `update_local_ref()`. The
function only has a single caller, and that caller always passes in a
non-`NULL` value.
This fixes a false positive in Coverity.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With 50957937f9 (fetch: introduce `display_format` enum, 2023-05-10), a
new enumeration was introduced to determine the display format that is
to be used by git-fetch(1). The `DISPLAY_FORMAT_UNKNOWN` value isn't
ever used though, and neither do we rely on the explicit `0` value for
initialization anywhere.
Remove the enum value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" learned the "--porcelain" option that emits what it did
in a machine-parseable format.
* ps/fetch-output-format:
fetch: introduce machine-parseable "porcelain" output format
fetch: move option related variables into main function
fetch: lift up parsing of "fetch.output" config variable
fetch: introduce `display_format` enum
fetch: refactor calculation of the display table width
fetch: print left-hand side when fetching HEAD:foo
fetch: add a test to exercise invalid output formats
fetch: split out tests for output format
fetch: fix `--no-recurse-submodules` with multi-remote fetches
|
|
The output of git-fetch(1) is obviously designed for consumption by
users, only: we neatly columnize data, we abbreviate reference names, we
print neat arrows and we don't provide information about actual object
IDs that have changed. This makes the output format basically unusable
in the context of scripted invocations of git-fetch(1) that want to
learn about the exact changes that the command performs.
Introduce a new machine-parseable "porcelain" output format that is
supposed to fix this shortcoming. This output format is intended to
provide information about every reference that is about to be updated,
the old object ID that the reference has been pointing to and the new
object ID it will be updated to. Furthermore, the output format provides
the same flags as the human-readable format to indicate basic conditions
for each reference update like whether it was a fast-forward update, a
branch deletion, a rejected update or others.
The output format is quite simple:
```
<flag> <old-object-id> <new-object-id> <local-reference>\n
```
We assume two conditions which are generally true:
- The old and new object IDs have fixed known widths and cannot
contain spaces.
- References cannot contain newlines.
With these assumptions, the output format becomes unambiguously
parseable. Furthermore, given that this output is designed to be
consumed by scripts, the machine-readable data is printed to stdout
instead of stderr like the human-readable output is. This is mostly done
so that other data printed to stderr, like error messages or progress
meters, don't interfere with the parseable data.
A notable ommission here is that the output format does not include the
remote from which a reference was fetched, which might be important
information especially in the context of multi-remote fetches. But as
such a format would require us to print the remote for every single
reference update due to parallelizable fetches it feels wasteful for the
most likely usecase, which is when fetching from a single remote.
In a similar spirit, a second restriction is that this cannot be used
with `--recurse-submodules`. This is because any reference updates would
be ambiguous without also printing the repository in which the update
happens.
Considering that both multi-remote and submodule fetches are user-facing
features, using them in conjunction with `--porcelain` that is intended
for scripting purposes is likely not going to be useful in the majority
of cases. With that in mind these restrictions feel acceptable. If
usecases for either of these come up in the future though it is easy
enough to add a new "porcelain-v2" format that adds this information.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The options of git-fetch(1) which we pass to `parse_options()` are
declared globally in `builtin/fetch.c`. This means we're forced to use
global variables for all the options, which is more likely to cause
confusion than explicitly passing state around.
Refactor the code to move the options into `cmd_fetch()`. Move variables
that were previously forced to be declared globally and which are only
used by `cmd_fetch()` into function-local scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parsing the display format happens inside of `display_state_init()`. As
we only need to check for a simple config entry, this is a natural
location to put this code as it means that display-state logic is neatly
contained in a single location.
We're about to introduce a new "porcelain" output format though that is
intended to be parseable by machines, for example inside of a script.
This format can be enabled by passing the `--porcelain` switch to
git-fetch(1). As a consequence, we'll have to add a second callsite that
influences the output format, which will become awkward to handle.
Refactor the code such that callers are expected to pass the display
format that is to be used into `display_state_init()`. This allows us to
lift up the code into the main function, where we can then hook it into
command line options parser in a follow-up commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently have two different display formats in git-fetch(1) with the
"full" and "compact" formats. This is tracked with a boolean value that
simply denotes whether the display format is supposed to be compacted
or not. This works reasonably well while there are only two formats, but
we're about to introduce another format that will make this a bit more
awkward to use.
Introduce a `enum display_format` that is more readily extensible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When displaying reference updates, we try to print the references in a
neat table. As the table's width is determined its contents we thus need
to precalculate the overall width before we can start printing updated
references.
The calculation is driven by `display_state_init()`, which invokes
`refcol_width()` for every reference that is to be printed. This split
is somewhat confusing. For one, we filter references that shall be
attributed to the overall width in both places. And second, we
needlessly recalculate the maximum line length based on the terminal
columns and display format for every reference.
Refactor the code so that the complete width calculations are neatly
contained in `refcol_width()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`store_updated_refs()` parses the remote reference for two purposes:
- It gets used as a note when writing FETCH_HEAD.
- It is passed through to `display_ref_update()` to display
updated references in the following format:
```
* branch master -> master
```
In most cases, the parsed remote reference is the prettified reference
name and can thus be used for both cases. But if the remote reference is
HEAD, the parsed remote reference becomes empty. This is intended when
we write the FETCH_HEAD, where we skip writing the note in that case.
But when displaying the updated references this leads to inconsistent
output where the left-hand side of reference updates is missing in some
cases:
```
$ git fetch origin HEAD HEAD:explicit-head :implicit-head main
From https://github.com/git/git
* branch HEAD -> FETCH_HEAD
* [new ref] -> explicit-head
* [new ref] -> implicit-head
* branch main -> FETCH_HEAD
```
This behaviour has existed ever since the table-based output has been
introduced for git-fetch(1) via 165f390250 (git-fetch: more terse fetch
output, 2007-11-03) and was never explicitly documented either in the
commit message or in any of our tests. So while it may not be a bug per
se, it feels like a weird inconsistency and not like it was a concious
design decision.
The logic of how we compute the remote reference name that we ultimately
pass to `display_ref_update()` is not easy to follow. There are three
different cases here:
- When the remote reference name is "HEAD" we set the remote
reference name to the empty string. This is the case that causes
the left-hand side to go missing, where we would indeed want to
print "HEAD" instead of the empty string. This is what
`prettify_refname()` would return.
- When the remote reference name has a well-known prefix then we
strip this prefix. This matches what `prettify_refname()` does.
- Otherwise, we keep the fully qualified reference name. This also
matches what `prettify_refname()` does.
As the return value of `prettify_refname()` would do the correct thing
for us in all three cases, we can thus fix the inconsistency by passing
through the full remote reference name to `display_ref_update()`, which
learns to call `prettify_refname()`. At the same time, this also
simplifies the code a bit.
Note that this patch also changes formatting of the block that computes
the "kind" (which is the category like "branch" or "tag") and "what"
(which is the prettified reference name like "master" or "v1.0")
variables. This is done on purpose so that it is part of the diff,
hopefully making the change easier to comprehend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running `git fetch --no-recurse-submodules`, the exectation is that
we don't fetch any submodules. And while this works for fetches of a
single remote, it doesn't when fetching multiple remotes at once. The
result is that we do recurse into submodules even though the user has
explicitly asked us not to.
This is because while we pass on `--recurse-submodules={yes,on-demand}`
if specified by the user, we don't pass on `--no-recurse-submodules` to
the subprocess spawned to perform the submodule fetch.
Fix this by also forwarding this flag as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
|
|
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch --all" does not have to download and handle the same
bundleURI over and over, which has been corrected.
* ds/fetch-bundle-uri-with-all:
fetch: download bundles once, even with --all
|
|
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
|
