| Age | Commit message (Collapse) | Author |
|---|
|
Large-object promisor protocol extension.
* cc/lop-remote:
doc: add technical design doc for large object promisors
promisor-remote: check advertised name or URL
Add 'promisor-remote' capability to protocol v2
|
|
Two configuration variables about SSL authentication material that
weren't mentioned in the documentations are now mentioned.
* ac/doc-http-ssl-type-config:
docs: indicate http.sslCertType and sslKeyType
|
|
Doc updates.
* en/doc-renormalize:
doc: clarify the intent of the renormalize option in the merge machinery
|
|
A previous commit introduced a "promisor.acceptFromServer" configuration
variable with only "None" or "All" as valid values.
Let's introduce "KnownName" and "KnownUrl" as valid values for this
configuration option to give more choice to a client about which
promisor remotes it might accept among those that the server advertised.
In case of "KnownName", the client will accept promisor remotes which
are already configured on the client and have the same name as those
advertised by the client. This could be useful in a corporate setup
where servers and clients are trusted to not switch names and URLs, but
where some kind of control is still useful.
In case of "KnownUrl", the client will accept promisor remotes which
have both the same name and the same URL configured on the client as the
name and URL advertised by the server. This is the most secure option,
so it should be used if possible.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a server S knows that some objects from a repository are available
from a promisor remote X, S might want to suggest to a client C cloning
or fetching the repo from S that C may use X directly instead of S for
these objects.
Note that this could happen both in the case S itself doesn't have the
objects and borrows them from X, and in the case S has the objects but
knows that X is better connected to the world (e.g., it is in a
$LARGEINTERNETCOMPANY datacenter with petabit/s backbone connections)
than S. Implementation of the latter case, which would require S to
omit in its response the objects available on X, is left for future
improvement though.
Then C might or might not, want to get the objects from X. If S and C
can agree on C using X directly, S can then omit objects that can be
obtained from X when answering C's request.
To allow S and C to agree and let each other know about C using X or
not, let's introduce a new "promisor-remote" capability in the
protocol v2, as well as a few new configuration variables:
- "promisor.advertise" on the server side, and:
- "promisor.acceptFromServer" on the client side.
By default, or if "promisor.advertise" is set to 'false', a server S will
not advertise the "promisor-remote" capability.
If S doesn't advertise the "promisor-remote" capability, then a client C
replying to S shouldn't advertise the "promisor-remote" capability
either.
If "promisor.advertise" is set to 'true', S will advertise its promisor
remotes with a string like:
promisor-remote=<pr-info>[;<pr-info>]...
where each <pr-info> element contains information about a single
promisor remote in the form:
name=<pr-name>[,url=<pr-url>]
where <pr-name> is the urlencoded name of a promisor remote and
<pr-url> is the urlencoded URL of the promisor remote named <pr-name>.
For now, the URL is passed in addition to the name. In the future, it
might be possible to pass other information like a filter-spec that the
client may use when cloning from S, or a token that the client may use
when retrieving objects from X.
It is C's responsibility to arrange how it can reach X though, so pieces
of information that are usually outside Git's concern, like proxy
configuration, must not be distributed over this protocol.
It might also be possible in the future for "promisor.advertise" to have
other values. For example a value like "onlyName" could prevent S from
advertising URLs, which could help in case C should use a different URL
for X than the URL S is using. (The URL S is using might be an internal
one on the server side for example.)
By default or if "promisor.acceptFromServer" is set to "None", C will
not accept to use the promisor remotes that might have been advertised
by S. In this case, C will not advertise any "promisor-remote"
capability in its reply to S.
If "promisor.acceptFromServer" is set to "All" and S advertised some
promisor remotes, then on the contrary, C will accept to use all the
promisor remotes that S advertised and C will reply with a string like:
promisor-remote=<pr-name>[;<pr-name>]...
where the <pr-name> elements are the urlencoded names of all the
promisor remotes S advertised.
In a following commit, other values for "promisor.acceptFromServer" will
be implemented, so that C will be able to decide the promisor remotes it
accepts depending on the name and URL it received from S. So even if
that name and URL information is not used much right now, it will be
needed soon.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All the documentation .txt files have been renamed to .adoc to help
content aware editors.
* bc/doc-adoc-not-txt:
Remove obsolete ".txt" extensions for AsciiDoc files
doc: use .adoc extension for AsciiDoc files
gitattributes: mark AsciiDoc files as LF-only
editorconfig: add .adoc extension
doc: update gitignore for .adoc extension
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'remote.<name>.followRemoteHEAD' was added in b7f7d16562 (fetch:
add configuration for set_head behaviour, 2024-11-29), its description
was added to remote.txt in between the two paragraphs describing
'remote.<name>.serverOption'. Reunite these two paragraphs.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git -c help.autocorrect=0 psuh" shows the suggested typofix,
unlike the previous attempt in the base topic.
* da/help-autocorrect-one-fix:
help: add "show" as a valid configuration value
help: show the suggested command when help.autocorrect is false
|
|
"[help] autocorrect = 1" used to be a way to say "please wait for
0.1 second after suggesting a typofix of the command name before
running that command"; now it means "yes, if there is a plausible
typofix for the command name, please run it immediately".
* sc/help-autocorrect-one:
help: interpret boolean string values for help.autocorrect
|
|
Documentaiton updates.
* jp/doc-trailer-config:
config.txt: add trailer.* variables
|
|
The -X renormalize (or merge.renormalize config) option is intended to
reduce conflicts due to normalization of newer versions of history. It
does so by renormalizing files that it is about to do a three-way
content merge on. Some folks thought it would renormalize all files
throughout the tree, and the previous wording wasn't clear enough to
dispell that misconception. Update the docs to make it clear that the
merge machinery will only apply renormalization to files which need a
three-way content merge.
(Technically, the merge machinery also does renormalization on
modify/delete conflicts, in order to see if the modification was merely
a normalization; if so, it can accept the delete and not report a
conflict. But it's not clear that this piece needs to be explained to
users, and trying to distinguish it might feel like splitting hairs and
overcomplicating the explanation, so we leave it out.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
0a01d41ee4 (http: add support for different sslcert and sslkey types.,
2023-03-20) added useful SSL config options, but did not document them.
Signed-off-by: Andrew Carter <andrew@emailcarter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a literal value for showing the suggested autocorrection
for consistency with the rest of the help.autocorrect options.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the handling of false boolean values for help.autocorrect
consistent with the handling of value 0 by showing the suggested
commands but not running them.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sc/help-autocorrect-one:
help: interpret boolean string values for help.autocorrect
|
|
Doc mark-up updates.
* ja/doc-notes-markup-updates:
doc: convert git-notes to new documentation format
|
|
Doc updates.
* ja/doc-commit-markup-updates:
doc: migrate git-commit manpage secondary files to new format
doc: convert git commit config to new format
doc: make more direct explanations in git commit options
doc: the mode param of -u of git commit is optional
doc: apply new documentation guidelines to git commit
|
|
The trailer.* configuration variables are currently only described in
git-interpret-trailers(1) but affect git-commit and git-tag as well.
Move that section into its own config/trailer.txt file and also include
it in git-config(1).
Signed-off-by: Julian Prein <julian@druckdev.xyz>
Acked-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We presently use the ".txt" extension for our AsciiDoc files. While not
wrong, most editors do not associate this extension with AsciiDoc,
meaning that contributors don't get automatic editor functionality that
could be useful, such as syntax highlighting and prose linting.
It is much more common to use the ".adoc" extension for AsciiDoc files,
since this helps editors automatically detect files and also allows
various forges to provide rich (HTML-like) rendering. Let's do that
here, renaming all of the files and updating the includes where
relevant. Adjust the various build scripts and makefiles to use the new
extension as well.
Note that this should not result in any user-visible changes to the
documentation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* aj/difftool-config-doc-fix:
difftool docs: restore correct position of tool list
|
|
Also prevent git-commit manpage to refer to itself in the config
description by using a variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git 2.47.2
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE4fA2sf7nIh/HeOzvsLXohpav5ssFAmdkT1sACgkQsLXohpav
# 5svdhRAAq0WoZIg+33vYNNVSTm3Ux9RJslmXs3lQuhuUJ61hK/28drSLU29GH7x7
# 3nmmjp1cegnXRVLBAfoYDdzPprNNrQFQEHQEzgG/GDZw0OXn+WTZuNyrrUYoa+sd
# QSLlElRj2qrpHIMOsMIBKBSNB+qjJHOMGdxcBAS768TfnQpGIpc1KJa24TxsVBzC
# ScP4uvrFfPyQrqFUgiUhCeqLnO/6T5i/QAn/8cS5a1+zor5ZHSlw28TZTOxN2odo
# Rulp/FtehiDEzmRowgD3M4fImAPY6Ib6VORCYASqpJFFla30tu2bQqEi6raOMTec
# hg5Ibkmj6fHFONaYvoTMRkYHmtUnNgIPU/CYPwswNk8w1+PPQfJ+TYjBXOQgdTLW
# F0azHBHh7NRmEHVydiF9CqjgNVRzjO4IEZfGqXNFPPMvR6UUzDaIkrpYbwXBFMin
# GNPV3QISeXj9ROjJoCv0nclXETwWemykjZlD6b5krXn5TaJlFb+69qJvXrCLq5WY
# EoevSqKkB9HVK9si7P8Sh1cPGOr3kfiFPmMNKFVI8l0+iDFgBywOomWNS/JEzqu1
# nN142DKdL1W/rkeMUhbX2h11CZNvHKIOy3iaA4MTOing8/eMzyUUQ73Ck7odYs4f
# rZ0tTXKJhxojPvBpTxYe9SxM0bDLREiOv0zX76+sIuhbAQCmk0o=
# =MNNf
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 08:52:43 AM PST
# gpg: using RSA key E1F036B1FEE7221FC778ECEFB0B5E88696AFE6CB
# gpg: Good signature from "Junio C Hamano <gitster@pobox.com>" [ultimate]
# gpg: aka "Junio C Hamano <junio@pobox.com>" [ultimate]
# gpg: aka "Junio C Hamano <jch@google.com>" [ultimate]
* tag 'v2.47.2':
Git 2.47.2
Git 2.46.3
Git 2.45.3
Git 2.44.3
Git 2.43.6
Git 2.42.4
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
A help.autocorrect value of 1 is currently interpreted as "wait 1
decisecond", which can be confusing to users who believe they are setting a
boolean value to turn the autocorrect feature on.
Interpret the value of help.autocorrect as either one of the accepted list
of special values ("never", "immediate", ...), a boolean or an integer. If
the value is 1, it is no longer interpreted as a decisecond value of 0.1s
but as a true boolean, the equivalent of "immediate". If the value is 2 or
more, continue treating it as a decisecond wait time.
False boolean string values ("off", "false", "no") are now equivalent to
"never", meaning that guessed values are still shown but nothing is
executed. True boolean string values are interpreted as "immediate".
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- Switch the synopsis to a synopsis block which will automatically
format placeholders in italics and keywords in monospace
- Use _<placeholder>_ instead of <placeholder> in the description
- Use `backticks` for keywords and more complex option
descriptions. The new rendering engine will apply synopsis rules to
these spans.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
2a9dfdf260 (difftool docs: de-duplicate configuration sections, 2022-09-07)
moved the difftool documentation, but missed moving this "include" line that
includes the generated list of diff tools, as referenced in the moved text.
Restore the correct position of the included list.
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" honors "remote.<remote>.followRemoteHEAD" settings to
tweak the remote-tracking HEAD in "refs/remotes/<remote>/HEAD".
* bf/fetch-set-head-config:
remote set-head: set followRemoteHEAD to "warn" if "always"
fetch set_head: add warn-if-not-$branch option
fetch set_head: move warn advice into advise_if_enabled
fetch: add configuration for set_head behaviour
|
|
Build procedure update plus introduction of Meson based builds.
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
|
|
Introduce a new repository extension to prevent older Git versions
from mis-interpreting worktrees created with relative paths.
* cw/worktree-extension:
worktree: refactor `repair_worktree_after_gitdir_move()`
worktree: add relative cli/config options to `repair` command
worktree: add relative cli/config options to `move` command
worktree: add relative cli/config options to `add` command
worktree: add `write_worktree_linking_files()` function
worktree: refactor infer_backlink return
worktree: add `relativeWorktrees` extension
setup: correctly reinitialize repository version
|
|
Our documentation uses "include::" directives to include parts that are
either reused across multiple documents or parts that we generate at
build time. Unfortunately, top-level includes are only ever resolved
relative to the base directory, which is typically the directory of the
including document. Most importantly, it is not possible to have either
asciidoc or asciidoctor search multiple directories.
It follows that both kinds of includes must live in the same directory.
This is of course a bummer for out-of-tree builds, because here the
dynamically-built includes live in the build directory whereas the
static includes live in the source directory.
Introduce a `build_dir` attribute and prepend it to all of our includes
for dynamically-built files. This attribute gets set to the build
directory and thus converts the include path to an absolute path, which
asciidoc and asciidoctor know how to resolve.
Note that this change also requires us to update "build-docdep.perl",
which tries to figure out included files such our Makefile can set up
proper build-time dependencies. This script simply scans through the
source files for any lines that match "^include::" and treats the
remainder of the line as included file path. But given that those may
now contain the "{build_dir}" variable we have to teach the script to
replace that attribute with the actual build directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently if we want to have a remote/HEAD locally that is different
from the one on the remote, but we still want to get a warning if remote
changes HEAD, our only option is to have an indiscriminate warning with
"follow_remote_head" set to "warn". Add a new option
"warn-if-not-$branch", where $branch is a branch name we do not wish to
get a warning about. If the remote HEAD is $branch do not warn,
otherwise, behave as "warn".
E.g. let's assume, that our remote origin has HEAD
set to "master", but locally we have "git remote set-head origin seen".
Setting 'remote.origin.followRemoteHEAD = "warn"' will always print
a warning, even though the remote has not changed HEAD from "master".
Setting 'remote.origin.followRemoteHEAD = "warn-if-not-master" will
squelch the warning message, unless the remote changes HEAD from
"master". Note, that should the remote change HEAD to "seen" (which we
have locally), there will still be no warning.
Improve the advice message in report_set_head to also include silencing
the warning message with "warn-if-not-$branch".
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation mark-up updates.
* ja/git-diff-doc-markup:
doc: git-diff: apply format changes to config part
doc: git-diff: apply format changes to diff-generate-patch
doc: git-diff: apply format changes to diff-format
doc: git-diff: apply format changes to diff-options
doc: git-diff: apply new documentation guidelines
|
|
In the current implementation, if refs/remotes/$remote/HEAD does not
exist, running fetch will create it, but if it does exist it will not do
anything, which is a somewhat safe and minimal approach. Unfortunately,
for users who wish to NOT have refs/remotes/$remote/HEAD set for any
reason (e.g. so that `git rev-parse origin` doesn't accidentally point
them somewhere they do not want to), there is no way to remove this
behaviour. On the other side of the spectrum, users may want fetch to
automatically update HEAD or at least give them a warning if something
changed on the remote.
Introduce a new setting, remote.$remote.followRemoteHEAD with four
options:
- "never": do not ever do anything, not even create
- "create": the current behaviour, now the default behaviour
- "warn": print a message if remote and local HEAD is different
- "always": silently update HEAD on every change
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces the `--[no-]relative-paths` CLI option and
`worktree.useRelativePaths` configuration setting to the `worktree add`
command. When enabled these options allow worktrees to be linked using
relative paths, enhancing portability across environments where absolute
paths may differ (e.g., containerized setups, shared network drives).
Git still creates absolute paths by default, but these options allow
users to opt-in to relative paths if desired.
The t2408 test file is removed and more comprehensive tests are
written for the various worktree operations in their own files.
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new extension, `relativeWorktrees`, is added to indicate that at least
one worktree in the repository has been linked with relative paths.
This ensures older Git versions do not attempt to automatically prune
worktrees with relative paths, as they would not not recognize the
paths as being valid.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.46:
Git 2.46.3
Git 2.45.3
Git 2.44.3
Git 2.43.6
Git 2.42.4
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
* maint-2.45:
Git 2.45.3
Git 2.44.3
Git 2.43.6
Git 2.42.4
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
* maint-2.44:
Git 2.44.3
Git 2.43.6
Git 2.42.4
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
* maint-2.43:
Git 2.43.6
Git 2.42.4
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
* maint-2.42:
Git 2.42.4
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
* maint-2.41:
Git 2.41.3
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
* maint-2.40:
Git 2.40.4
credential: disallow Carriage Returns in the protocol by default
credential: sanitize the user prompt
credential_format(): also encode <host>[:<port>]
t7300: work around platform-specific behaviour with long paths on MinGW
compat/regex: fix argument order to calloc(3)
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
ci: remove 'Upload failed tests' directories' step from linux32 jobs
|
|
While Git has documented that the credential protocol is line-based,
with newlines as terminators, the exact shape of a newline has not been
documented.
From Git's perspective, which is firmly rooted in the Linux ecosystem,
it is clear that "a newline" means a Line Feed character.
However, even Git's credential protocol respects Windows line endings
(a Carriage Return character followed by a Line Feed character, "CR/LF")
by virtue of using `strbuf_getline()`.
There is a third category of line endings that has been used originally
by MacOS, and that is respected by the default line readers of .NET and
node.js: bare Carriage Returns.
Git cannot handle those, and what is worse: Git's remedy against
CVE-2020-5260 does not catch when credential helpers are used that
interpret bare Carriage Returns as newlines.
Git Credential Manager addressed this as CVE-2024-50338, but other
credential helpers may still be vulnerable. So let's not only disallow
Line Feed characters as part of the values in the credential protocol,
but also disallow Carriage Return characters.
In the unlikely event that a credential helper relies on Carriage
Returns in the protocol, introduce an escape hatch via the
`credential.protectProtocol` config setting.
This addresses CVE-2024-52006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
When asking the user interactively for credentials, we want to avoid
misleading them e.g. via control sequences that pretend that the URL
targets a trusted host when it does not.
While Git learned, over the course of the preceding commits, to disallow
URLs containing URL-encoded control characters by default, credential
helpers are still allowed to specify values very freely (apart from Line
Feed and NUL characters, anything is allowed), and this would allow,
say, a username containing control characters to be specified that would
then be displayed in the interactive terminal prompt asking the user for
the password, potentially sending those control characters directly to
the terminal. This is undesirable because control characters can be used
to mislead users to divulge secret information to untrusted sites.
To prevent such an attack vector, let's add a `git_prompt()` that forces
the displayed text to be sanitized, i.e. displaying question marks
instead of control characters.
Note: While this commit's diff changes a lot of `user@host` strings to
`user%40host`, which may look suspicious on the surface, there is a good
reason for that: this string specifies a user name, not a
<username>@<hostname> combination! In the context of t5541, the actual
combination looks like this: `user%40@127.0.0.1:5541`. Therefore, these
string replacements document a net improvement introduced by this
commit, as `user@host@127.0.0.1` could have left readers wondering where
the user name ends and where the host name begins.
Hinted-at-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
By the way, we also change the sentences where git-diff would refer to
itself, so that no link is created in the HTML output.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Centralize documentation for repository extensions into a single place.
* cw/config-extensions:
doc: consolidate extensions in git-config documentation
|
|
The `technical/repository-version.txt` document originally served as the
master list for extensions, requiring that any new extensions be defined
there. However, the `config/extensions.txt` file was introduced later
and has since become the de facto location for describing extensions,
with several extensions listed there but missing from
`repository-version.txt`.
This consolidates all extension definitions into `config/extensions.txt`,
making it the authoritative source for extensions. The references in
`repository-version.txt` are updated to point to `config/extensions.txt`,
and cross-references to related documentation such as
`gitrepository-layout[5]` and `git-config[1]` are added.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Document how setting of `uploadpack.allowAnySHA1InWant`
influences other `uploadpack` options - `allowTipSHA1InWant`
and `allowReachableSHA1InWant`.
Signed-off-by: Piotr Szlazak <piotr.szlazak@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Currently, server options for Git protocol v2 can only be specified via
the command line option "--server-option" or "-o", which is inconvenient
when users want to specify a list of default options to send. Therefore,
we are introducing a new configuration to hold a list of default server
options, akin to the `push.pushOption` configuration for push options.
Initially, I named the new configuration `fetch.serverOption` to align
with `push.pushOption`. However, after discussing with Patrick, it was
renamed to `remote.<name>.serverOption` as suggested, because:
1. Server options are designed to be server-specific, making it more
logical to use a per-remote configuration.
2. Using "fetch." prefixed configurations in git-clone or git-ls-remote
seems out of place and inconsistent in design.
The parsing logic for `remote.<name>.serverOption` also relies on
`transport.c:parse_transport_option`, similar to `push.pushOption`, and
they follow the same priority design:
1. Server options set in lower-priority configuration files (e.g.,
/etc/gitconfig or $HOME/.gitconfig) can be overridden or unset in
more specific repository configurations using an empty string.
2. Command-line specified server options take precedence over those from
the configuration.
Server options from configuration are stored to the corresponding
`remote.h:remote` as a new field `server_options`. The field will be
utilized in the subsequent commit to help initialize the
`server_options` of `transport.h:transport`.
And documentation have been updated accordingly.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Liu Zhongbo <liuzhongbo.6666@bytedance.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
